[PATCH 10/13] arm64: dts: broadcom: northstar2: Rework clock nodes

["Rob Herring (Arm)" <robh@kernel.org>]

The nd2-clocks.dtsi is oddly included in the middle of a bus node and is
only included in one place, so collapse it into ns2.dtsi. Move the fixed
and fixed-factor clock nodes to the root as they are not part of the
bus. Rename the node names to use preferred names.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../boot/dts/broadcom/northstar2/ns2-clock.dtsi    | 105 ---------------------
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi   |  73 +++++++++++++-
 2 files changed, 71 insertions(+), 107 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
deleted file mode 100644
index 99009fdf10a4..000000000000
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright (c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/clock/bcm-ns2.h>
-
-	osc: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	lcpll_ddr: lcpll_ddr@6501d058 {
-		#clock-cells = <1>;
-		compatible = "brcm,ns2-lcpll-ddr";
-		reg = <0x6501d058 0x20>,
-		      <0x6501c020 0x4>,
-		      <0x6501d04c 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "lcpll_ddr", "pcie_sata_usb",
-				     "ddr", "ddr_ch2_unused",
-				     "ddr_ch3_unused", "ddr_ch4_unused",
-				     "ddr_ch5_unused";
-	};
-
-	lcpll_ports: lcpll_ports@6501d078 {
-		#clock-cells = <1>;
-		compatible = "brcm,ns2-lcpll-ports";
-		reg = <0x6501d078 0x20>,
-		      <0x6501c020 0x4>,
-		      <0x6501d054 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "lcpll_ports", "wan", "rgmii",
-				     "ports_ch2_unused",
-				     "ports_ch3_unused",
-				     "ports_ch4_unused",
-				     "ports_ch5_unused";
-	};
-
-	genpll_scr: genpll_scr@6501d098 {
-		#clock-cells = <1>;
-		compatible = "brcm,ns2-genpll-scr";
-		reg = <0x6501d098 0x32>,
-		      <0x6501c020 0x4>,
-		      <0x6501d044 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "genpll_scr", "scr", "fs",
-				     "audio_ref", "scr_ch3_unused",
-				     "scr_ch4_unused", "scr_ch5_unused";
-	};
-
-	iprocmed: iprocmed {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	iprocslow: iprocslow {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-		clock-div = <4>;
-		clock-mult = <1>;
-	};
-
-	genpll_sw: genpll_sw@6501d0c4 {
-		#clock-cells = <1>;
-		compatible = "brcm,ns2-genpll-sw";
-		reg = <0x6501d0c4 0x32>,
-		      <0x6501c020 0x4>,
-		      <0x6501d044 0x4>;
-		clocks = <&osc>;
-		clock-output-names = "genpll_sw", "rpe", "250", "nic",
-				     "chimp", "port", "sdio";
-	};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 0de9d6265701..c9bf77b3566e 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -113,6 +113,28 @@ pmu {
 				     <&A57_3>;
 	};
 
+	osc: clock-25000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	iprocmed: iprocmed {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	iprocslow: iprocslow {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
 	pcie0: pcie@20020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x20020000 0 0x1000>;
@@ -197,8 +219,6 @@ soc: soc {
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
-		#include "ns2-clock.dtsi"
-
 		enet: ethernet@61000000 {
 			compatible = "brcm,ns2-amac";
 			reg = <0x61000000 0x1000>,
@@ -334,6 +354,55 @@ smmu: iommu@64000000 {
 			#iommu-cells = <1>;
 		};
 
+		lcpll_ddr: clock-controller@6501d058 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-lcpll-ddr";
+			reg = <0x6501d058 0x20>,
+			      <0x6501c020 0x4>,
+			      <0x6501d04c 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+					     "ddr", "ddr_ch2_unused",
+					     "ddr_ch3_unused", "ddr_ch4_unused",
+					     "ddr_ch5_unused";
+		};
+
+		lcpll_ports: clock-controller@6501d078 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-lcpll-ports";
+			reg = <0x6501d078 0x20>,
+			      <0x6501c020 0x4>,
+			      <0x6501d054 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll_ports", "wan", "rgmii",
+					     "ports_ch2_unused",
+					     "ports_ch3_unused",
+					     "ports_ch4_unused",
+					     "ports_ch5_unused";
+		};
+
+		genpll_scr: clock-controller@6501d098 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-genpll-scr";
+			reg = <0x6501d098 0x32>,
+			      <0x6501c020 0x4>,
+			      <0x6501d044 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll_scr", "scr", "fs",
+					     "audio_ref", "scr_ch3_unused",
+					     "scr_ch4_unused", "scr_ch5_unused";
+		};
+
+		genpll_sw: clock-controller@6501d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-genpll-sw";
+			reg = <0x6501d0c4 0x32>,
+			      <0x6501c020 0x4>,
+			      <0x6501d044 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll_sw", "rpe", "250", "nic",
+					     "chimp", "port", "sdio";
+		};
 		pinctrl: pinctrl@6501d130 {
 			compatible = "brcm,ns2-pinmux";
 			reg = <0x6501d130 0x08>,

-- 
2.51.0