[PATCH v7 0/4] Add support for i.MX8ULP's SIM LPAV

[PATCH v7 0/4] Add support for i.MX8ULP's SIM LPAV

[Laurentiu Mihalcea]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

The LPAV System Integration Module (SIM) is an IP found inside i.MX8ULP's
LPAV subsystem, which offers clock gating, reset line
assertion/de-assertion, and various other misc. options.

This series adds support for the IP by introducing a new clock HW provider
driver and by modifying i.MX8MP's AUDIOMIX block control reset driver to
allow it to be used for i.MX8ULP's SIM LPAV as well.

This series is a spin-off from [1].

[1]: https://lore.kernel.org/lkml/20240922174225.75948-1-laurentiumihalcea111@gmail.com/

---
Changes in v7:

* drop the DTS-related patch, which was already picked up by Shawn.
* link to v6: https://lore.kernel.org/lkml/20251126124218.803-1-laurentiumihalcea111@gmail.com/

Changes in v6:

* store a "const struct imx8mp_reset_map" pointer instead of
  a "const struct imx8mp_reset_info" pointer in
  "struct imx8mp_audiomix_reset"
* switch back to the mask-based approach
* link to v5: https://lore.kernel.org/lkml/20251114133738.1762-1-laurentiumihalcea111@gmail.com/

Changes in v5:

* drop patches that were already picked up by Philipp/Abel.
* include the "bits.h" header.
* replace mask with bit index.
* link to v4: https://lore.kernel.org/lkml/20251104120301.913-1-laurentiumihalcea111@gmail.com/

Changes in v4:

* shorten commit message for patch 5
* drop base from "struct imx8mp_audiomix_reset" and use local variable
* imx8mp_audiomix_reset_get_regmap() now takes "struct imx8mp_audiomix_reset *"
  as its argument instead of a "struct device *"
* use base pointer as the data argument for devm_add_action_or_reset()
* shorten commit message for patch 6
* drop regmap field from "struct clk_imx8ulp_sim_lpav_data", use local
  variable and let devres manage it
* drop base field from "struct clk_imx8ulp_sim_lpav_data", use local
  variable and let devres manage it.
* CONFIG_CLK_IMX8ULP now selects CONFIG_AUXILIARY_BUS, which is needed
  for devm_auxiliary_device_create().
* drop static definition of "struct regmap_config" and change to using
  local one in the clock driver.
* link to v3: https://lore.kernel.org/lkml/20251029135229.890-1-laurentiumihalcea111@gmail.com/

Changes in v3:

* rename "lpav_bus", "hifi_core", and "hifi_plat" to "bus", "core", "plat"
* don't assign the "name" field of "struct clk_parent_data". Previously, we
  were assigning the local parent name to this field, which wouldn't have
  worked anyways if, for whatever reason, the fallback mechanism would kick in.
* replace the whole auxiliary reset driver creation chunk by
  a single devm_auxiliary_device_create() call.
* replace the "shift" field from "struct imx8mp_reset_map" with the usage of
  ffs()
* shorten commit description for patch 6
* cast "id->driver_data" to "void *" instead of the previous
  "const struct imx8mp_reset_info *", which makes the line shorter.
* open question resulting from Peng Fan's comment on V2: how to access
  interconnect QoS registers? do we need to model the sim_lpav as an
  interconnect provider as well or is it fine to have another interconnect
  provider that references the sim_lpav node and accesses its registers
  via regmap (dev_get_regmap(), specifically, NOT syscon).
* link to v2: https://lore.kernel.org/lkml/20251017112025.11997-1-laurentiumihalcea111@gmail.com/

Changes in v2:

* drop redundant description for "#clock-cells"/"#reset-cells" properties
  from binding
* make "mux-controller" and "#reset-cells" properties mandatory
* add "mux-controller" child to binding example node
* drop the compatiblity with syscon - this was never actually needed and
  it was done to allow using "mmio-mux", which requires a syscon parent
* modify the auxiliary reset driver to use regmap - this will allow the
  mux controller, clock control and reset control APIs to use the same
  spinlock.
* rename "imx8ulp-reset-sim-lpav.h" to "fsl,imx8ulp-sim-lpav.h"
* drop the "IMX8ULP_CLK_SIM_LPAV_END" macro, which doesn't belong to the
  binding headers
* fix the values of "IMX8MP_AUDIOMIX_EARC_RESET_MASK" and
  "IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK", which were previously incorrect
* drop redundant macros from auxiliary reset driver - replace their
  occurrences with their values
* squash the binding-related macro additions into the binding patch
* add mux-controller child node to the sim_lpav node
* make the "gates" array static
* link to v1: https://lore.kernel.org/lkml/20250804155407.285353-1-laurentiumihalcea111@gmail.com/
---

Laurentiu Mihalcea (4):
  reset: imx8mp-audiomix: Drop unneeded macros
  reset: imx8mp-audiomix: Switch to using regmap API
  reset: imx8mp-audiomix: Extend the driver usage
  reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV

 drivers/reset/reset-imx8mp-audiomix.c | 169 +++++++++++++++++++-------
 1 file changed, 125 insertions(+), 44 deletions(-)

-- 
2.43.0

[PATCH v7 1/4] reset: imx8mp-audiomix: Drop unneeded macros

[Laurentiu Mihalcea]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

The macros defining the mask values for the EARC, EARC PHY resets,
and the DSP RUN_STALL signal can be dropped as they are not and will
not be used anywhere else except to set the value of the "mask" field
from "struct imx8mp_reset_map". In this particular case, based on the
name of the "mask" field, you can already deduce what these values are
for, which is why defining macros for them doesn't offer any new
information, nor does it help with the code readability.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 drivers/reset/reset-imx8mp-audiomix.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
index eceb37ff5dc5..acfa92b15329 100644
--- a/drivers/reset/reset-imx8mp-audiomix.c
+++ b/drivers/reset/reset-imx8mp-audiomix.c
@@ -6,6 +6,7 @@
 #include <dt-bindings/reset/imx8mp-reset-audiomix.h>
 
 #include <linux/auxiliary_bus.h>
+#include <linux/bits.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -14,11 +15,7 @@
 #include <linux/reset-controller.h>
 
 #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET	0x200
-#define IMX8MP_AUDIOMIX_EARC_RESET_MASK		BIT(0)
-#define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK	BIT(1)
-
 #define IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET	0x108
-#define IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK	BIT(5)
 
 struct imx8mp_reset_map {
 	unsigned int offset;
@@ -29,17 +26,17 @@ struct imx8mp_reset_map {
 static const struct imx8mp_reset_map reset_map[] = {
 	[IMX8MP_AUDIOMIX_EARC_RESET] = {
 		.offset	= IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
-		.mask	= IMX8MP_AUDIOMIX_EARC_RESET_MASK,
+		.mask = BIT(0),
 		.active_low = true,
 	},
 	[IMX8MP_AUDIOMIX_EARC_PHY_RESET] = {
 		.offset	= IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
-		.mask	= IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK,
+		.mask = BIT(1),
 		.active_low = true,
 	},
 	[IMX8MP_AUDIOMIX_DSP_RUNSTALL] = {
 		.offset	= IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET,
-		.mask	= IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK,
+		.mask = BIT(5),
 		.active_low = false,
 	},
 };
-- 
2.43.0

[PATCH v7 2/4] reset: imx8mp-audiomix: Switch to using regmap API

[Laurentiu Mihalcea]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Switch to using the regmap API to allow performing register operations
under the same lock. This is needed for cases such as i.MX8ULP's SIM LPAV
where clock gating, reset control and MUX-ing is performed via the same
register (i.e. SYSCTRL0) and different subsystem APIs.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 drivers/reset/reset-imx8mp-audiomix.c | 92 +++++++++++++++++----------
 1 file changed, 57 insertions(+), 35 deletions(-)

diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
index acfa92b15329..f6152c0cc5ff 100644
--- a/drivers/reset/reset-imx8mp-audiomix.c
+++ b/drivers/reset/reset-imx8mp-audiomix.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/reset-controller.h>
 
 #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET	0x200
@@ -43,8 +44,7 @@ static const struct imx8mp_reset_map reset_map[] = {
 
 struct imx8mp_audiomix_reset {
 	struct reset_controller_dev rcdev;
-	spinlock_t lock; /* protect register read-modify-write cycle */
-	void __iomem *base;
+	struct regmap *regmap;
 };
 
 static struct imx8mp_audiomix_reset *to_imx8mp_audiomix_reset(struct reset_controller_dev *rcdev)
@@ -56,26 +56,14 @@ static int imx8mp_audiomix_update(struct reset_controller_dev *rcdev,
 				  unsigned long id, bool assert)
 {
 	struct imx8mp_audiomix_reset *priv = to_imx8mp_audiomix_reset(rcdev);
-	void __iomem *reg_addr = priv->base;
-	unsigned int mask, offset, active_low;
-	unsigned long reg, flags;
+	unsigned int mask, offset, active_low, val;
 
 	mask = reset_map[id].mask;
 	offset = reset_map[id].offset;
 	active_low = reset_map[id].active_low;
+	val = (active_low ^ assert) ? mask : ~mask;
 
-	spin_lock_irqsave(&priv->lock, flags);
-
-	reg = readl(reg_addr + offset);
-	if (active_low ^ assert)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	writel(reg, reg_addr + offset);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 0;
+	return regmap_update_bits(priv->regmap, offset, mask, val);
 }
 
 static int imx8mp_audiomix_reset_assert(struct reset_controller_dev *rcdev,
@@ -95,6 +83,52 @@ static const struct reset_control_ops imx8mp_audiomix_reset_ops = {
 	.deassert = imx8mp_audiomix_reset_deassert,
 };
 
+static const struct regmap_config regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+/* assumption: registered only if not using parent regmap */
+static void imx8mp_audiomix_reset_iounmap(void *data)
+{
+	void __iomem *base = (void __iomem *)data;
+
+	iounmap(base);
+}
+
+static int imx8mp_audiomix_reset_get_regmap(struct imx8mp_audiomix_reset *priv)
+{
+	void __iomem *base;
+	struct device *dev;
+	int ret;
+
+	dev = priv->rcdev.dev;
+
+	/* try to use the parent's regmap */
+	priv->regmap = dev_get_regmap(dev->parent, NULL);
+	if (priv->regmap)
+		return 0;
+
+	/* ... if that's not possible then initialize the regmap right now */
+	base = of_iomap(dev->parent->of_node, 0);
+	if (!base)
+		return dev_err_probe(dev, -ENOMEM, "failed to iomap address space\n");
+
+	ret = devm_add_action_or_reset(dev,
+				       imx8mp_audiomix_reset_iounmap,
+				       (void __force *)base);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to register action\n");
+
+	priv->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+	if (IS_ERR(priv->regmap))
+		return dev_err_probe(dev, PTR_ERR(priv->regmap),
+				     "failed to initialize regmap\n");
+
+	return 0;
+}
+
 static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
 				       const struct auxiliary_device_id *id)
 {
@@ -106,36 +140,25 @@ static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
 	if (!priv)
 		return -ENOMEM;
 
-	spin_lock_init(&priv->lock);
-
 	priv->rcdev.owner     = THIS_MODULE;
 	priv->rcdev.nr_resets = ARRAY_SIZE(reset_map);
 	priv->rcdev.ops       = &imx8mp_audiomix_reset_ops;
 	priv->rcdev.of_node   = dev->parent->of_node;
 	priv->rcdev.dev	      = dev;
 	priv->rcdev.of_reset_n_cells = 1;
-	priv->base            = of_iomap(dev->parent->of_node, 0);
-	if (!priv->base)
-		return -ENOMEM;
 
 	dev_set_drvdata(dev, priv);
 
+	ret = imx8mp_audiomix_reset_get_regmap(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get regmap\n");
+
 	ret = devm_reset_controller_register(dev, &priv->rcdev);
 	if (ret)
-		goto out_unmap;
+		return dev_err_probe(dev, ret,
+				     "failed to register reset controller\n");
 
 	return 0;
-
-out_unmap:
-	iounmap(priv->base);
-	return ret;
-}
-
-static void imx8mp_audiomix_reset_remove(struct auxiliary_device *adev)
-{
-	struct imx8mp_audiomix_reset *priv = dev_get_drvdata(&adev->dev);
-
-	iounmap(priv->base);
 }
 
 static const struct auxiliary_device_id imx8mp_audiomix_reset_ids[] = {
@@ -148,7 +171,6 @@ MODULE_DEVICE_TABLE(auxiliary, imx8mp_audiomix_reset_ids);
 
 static struct auxiliary_driver imx8mp_audiomix_reset_driver = {
 	.probe		= imx8mp_audiomix_reset_probe,
-	.remove		= imx8mp_audiomix_reset_remove,
 	.id_table	= imx8mp_audiomix_reset_ids,
 };
 
-- 
2.43.0

Re: [PATCH v7 2/4] reset: imx8mp-audiomix: Switch to using regmap API

[Daniel Baluta]

On Mon, Jan 26, 2026 at 6:23 PM Laurentiu Mihalcea
<laurentiumihalcea111@gmail.com> wrote:
>
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>
> Switch to using the regmap API to allow performing register operations
> under the same lock. This is needed for cases such as i.MX8ULP's SIM LPAV
> where clock gating, reset control and MUX-ing is performed via the same
> register (i.e. SYSCTRL0) and different subsystem APIs.
>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>

[PATCH v7 3/4] reset: imx8mp-audiomix: Extend the driver usage

[Laurentiu Mihalcea]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Switch to per-device reset map to allow reusing the driver for other NXP
block control IPs.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 drivers/reset/reset-imx8mp-audiomix.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
index f6152c0cc5ff..00eee528a2d2 100644
--- a/drivers/reset/reset-imx8mp-audiomix.c
+++ b/drivers/reset/reset-imx8mp-audiomix.c
@@ -24,7 +24,12 @@ struct imx8mp_reset_map {
 	bool active_low;
 };
 
-static const struct imx8mp_reset_map reset_map[] = {
+struct imx8mp_reset_info {
+	const struct imx8mp_reset_map *map;
+	int num_lines;
+};
+
+static const struct imx8mp_reset_map imx8mp_reset_map[] = {
 	[IMX8MP_AUDIOMIX_EARC_RESET] = {
 		.offset	= IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
 		.mask = BIT(0),
@@ -42,9 +47,15 @@ static const struct imx8mp_reset_map reset_map[] = {
 	},
 };
 
+static const struct imx8mp_reset_info imx8mp_reset_info = {
+	.map = imx8mp_reset_map,
+	.num_lines = ARRAY_SIZE(imx8mp_reset_map),
+};
+
 struct imx8mp_audiomix_reset {
 	struct reset_controller_dev rcdev;
 	struct regmap *regmap;
+	const struct imx8mp_reset_map *map;
 };
 
 static struct imx8mp_audiomix_reset *to_imx8mp_audiomix_reset(struct reset_controller_dev *rcdev)
@@ -56,6 +67,7 @@ static int imx8mp_audiomix_update(struct reset_controller_dev *rcdev,
 				  unsigned long id, bool assert)
 {
 	struct imx8mp_audiomix_reset *priv = to_imx8mp_audiomix_reset(rcdev);
+	const struct imx8mp_reset_map *reset_map = priv->map;
 	unsigned int mask, offset, active_low, val;
 
 	mask = reset_map[id].mask;
@@ -132,16 +144,20 @@ static int imx8mp_audiomix_reset_get_regmap(struct imx8mp_audiomix_reset *priv)
 static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
 				       const struct auxiliary_device_id *id)
 {
+	const struct imx8mp_reset_info *rinfo;
 	struct imx8mp_audiomix_reset *priv;
 	struct device *dev = &adev->dev;
 	int ret;
 
+	rinfo = (void *)id->driver_data;
+
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	priv->rcdev.owner     = THIS_MODULE;
-	priv->rcdev.nr_resets = ARRAY_SIZE(reset_map);
+	priv->map             = rinfo->map;
+	priv->rcdev.nr_resets = rinfo->num_lines;
 	priv->rcdev.ops       = &imx8mp_audiomix_reset_ops;
 	priv->rcdev.of_node   = dev->parent->of_node;
 	priv->rcdev.dev	      = dev;
@@ -164,6 +180,7 @@ static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
 static const struct auxiliary_device_id imx8mp_audiomix_reset_ids[] = {
 	{
 		.name = "clk_imx8mp_audiomix.reset",
+		.driver_data = (kernel_ulong_t)&imx8mp_reset_info,
 	},
 	{ }
 };
-- 
2.43.0

[PATCH v7 4/4] reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV

[Laurentiu Mihalcea]

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Support i.MX8ULP's SIM LPAV by adding its reset map definition.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 drivers/reset/reset-imx8mp-audiomix.c | 45 +++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
index 00eee528a2d2..b7fa3110f282 100644
--- a/drivers/reset/reset-imx8mp-audiomix.c
+++ b/drivers/reset/reset-imx8mp-audiomix.c
@@ -3,6 +3,7 @@
  * Copyright 2024 NXP
  */
 
+#include <dt-bindings/reset/fsl,imx8ulp-sim-lpav.h>
 #include <dt-bindings/reset/imx8mp-reset-audiomix.h>
 
 #include <linux/auxiliary_bus.h>
@@ -18,6 +19,8 @@
 #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET	0x200
 #define IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET	0x108
 
+#define IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET	0x8
+
 struct imx8mp_reset_map {
 	unsigned int offset;
 	unsigned int mask;
@@ -52,6 +55,44 @@ static const struct imx8mp_reset_info imx8mp_reset_info = {
 	.num_lines = ARRAY_SIZE(imx8mp_reset_map),
 };
 
+static const struct imx8mp_reset_map imx8ulp_reset_map[] = {
+	[IMX8ULP_SIM_LPAV_HIFI4_DSP_DBG_RST] = {
+		.offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
+		.mask = BIT(25),
+		.active_low = false,
+	},
+	[IMX8ULP_SIM_LPAV_HIFI4_DSP_RST] = {
+		.offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
+		.mask = BIT(16),
+		.active_low = false,
+	},
+	[IMX8ULP_SIM_LPAV_HIFI4_DSP_STALL] = {
+		.offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
+		.mask = BIT(13),
+		.active_low = false,
+	},
+	[IMX8ULP_SIM_LPAV_DSI_RST_BYTE_N] = {
+		.offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
+		.mask = BIT(5),
+		.active_low = true,
+	},
+	[IMX8ULP_SIM_LPAV_DSI_RST_ESC_N] = {
+		.offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
+		.mask = BIT(4),
+		.active_low = true,
+	},
+	[IMX8ULP_SIM_LPAV_DSI_RST_DPI_N] = {
+		.offset = IMX8ULP_SIM_LPAV_SYSCTRL0_OFFSET,
+		.mask = BIT(3),
+		.active_low = true,
+	},
+};
+
+static const struct imx8mp_reset_info imx8ulp_reset_info = {
+	.map = imx8ulp_reset_map,
+	.num_lines = ARRAY_SIZE(imx8ulp_reset_map),
+};
+
 struct imx8mp_audiomix_reset {
 	struct reset_controller_dev rcdev;
 	struct regmap *regmap;
@@ -182,6 +223,10 @@ static const struct auxiliary_device_id imx8mp_audiomix_reset_ids[] = {
 		.name = "clk_imx8mp_audiomix.reset",
 		.driver_data = (kernel_ulong_t)&imx8mp_reset_info,
 	},
+	{
+		.name = "clk_imx8ulp_sim_lpav.reset",
+		.driver_data = (kernel_ulong_t)&imx8ulp_reset_info,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(auxiliary, imx8mp_audiomix_reset_ids);
-- 
2.43.0