[PATCH v6 2/7] i2c: xiic: make the clock optional

[Abdurrahman Hussain via B4 Relay <devnull+abdurrahman.nexthop.ai@kernel.org>]

From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

The xiic driver is designed to operate without explicit clock configuration
when clocks are not specified in the firmware. This functionality is
already implemented in xiic_setclk(), which performs an early return when
either i2c_clk or input_clk are zero:

This condition is satisfied when clocks are missing, as clk_get_rate(NULL)
returns zero, allowing the driver to rely on hardware-configured timing.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 28015d77599d..16202fb89271 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1423,6 +1423,7 @@ MODULE_DEVICE_TABLE(of, xiic_of_match);
 
 static int xiic_i2c_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct xiic_i2c *i2c;
 	struct xiic_i2c_platform_data *pdata;
 	const struct of_device_id *match;
@@ -1464,7 +1465,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	mutex_init(&i2c->lock);
 	spin_lock_init(&i2c->atomic_lock);
 
-	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
 	if (IS_ERR(i2c->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
 				     "failed to enable input clock.\n");

-- 
2.52.0