From: Abdurrahman Hussain via B4 Relay <devnull+abdurrahman.nexthop.ai@kernel.org>
To: Michal Simek <michal.simek@amd.com>,
Andi Shyti <andi.shyti@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
info@mocean-labs.com
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>,
linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Abdurrahman Hussain <abdurrahman@nexthop.ai>
Subject: [PATCH v6 5/7] i2c: xiic: switch to generic device property accessors
Date: Tue, 27 Jan 2026 21:03:59 +0000 [thread overview]
Message-ID: <20260127-i2c-xiic-v6-5-e82e2f6f657c@nexthop.ai> (raw)
In-Reply-To: <20260127-i2c-xiic-v6-0-e82e2f6f657c@nexthop.ai>
From: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Use generic device property accessors.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
drivers/i2c/busses/i2c-xiic.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 95242d39f554..73fc8f8cb5d4 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -27,7 +27,6 @@
#include <linux/platform_data/i2c-xiic.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/of.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/iopoll.h>
@@ -1408,7 +1407,6 @@ static const struct i2c_adapter xiic_adapter = {
.algo = &xiic_algorithm,
};
-#if defined(CONFIG_OF)
static const struct xiic_version_data xiic_2_00 = {
.quirks = DYNAMIC_MODE_READ_BROKEN_BIT,
};
@@ -1419,14 +1417,13 @@ static const struct of_device_id xiic_of_match[] = {
{},
};
MODULE_DEVICE_TABLE(of, xiic_of_match);
-#endif
static int xiic_i2c_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct xiic_i2c *i2c;
struct xiic_i2c_platform_data *pdata;
- const struct of_device_id *match;
+ const struct xiic_version_data *data;
struct resource *res;
int ret, irq;
u8 i;
@@ -1436,12 +1433,9 @@ static int xiic_i2c_probe(struct platform_device *pdev)
if (!i2c)
return -ENOMEM;
- match = of_match_node(xiic_of_match, pdev->dev.of_node);
- if (match && match->data) {
- const struct xiic_version_data *data = match->data;
-
+ data = device_get_match_data(dev);
+ if (data)
i2c->quirks = data->quirks;
- }
i2c->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(i2c->base))
@@ -1458,7 +1452,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
i2c->adap = xiic_adapter;
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
- i2c->adap.dev.of_node = pdev->dev.of_node;
+ device_set_node(&i2c->adap.dev, dev_fwnode(dev));
snprintf(i2c->adap.name, sizeof(i2c->adap.name),
DRIVER_NAME " %s", pdev->name);
@@ -1482,8 +1476,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
/* SCL frequency configuration */
i2c->input_clk = clk_get_rate(i2c->clk);
- ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
- &i2c->i2c_clk);
+ ret = device_property_read_u32(dev, "clock-frequency", &i2c->i2c_clk);
/* If clock-frequency not specified in DT, do not configure in SW */
if (ret || i2c->i2c_clk > I2C_MAX_FAST_MODE_PLUS_FREQ)
i2c->i2c_clk = 0;
@@ -1494,8 +1487,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
if (ret)
return ret;
- i2c->singlemaster =
- of_property_read_bool(pdev->dev.of_node, "single-master");
+ i2c->singlemaster = device_property_read_bool(dev, "single-master");
/*
* Detect endianness
--
2.52.0
next prev parent reply other threads:[~2026-01-27 21:04 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-27 21:03 [PATCH v6 0/7] i2c: xiic: use " Abdurrahman Hussain via B4 Relay
2026-01-27 21:03 ` [PATCH v6 1/7] dt-bindings: i2c: xiic: make clocks optional Abdurrahman Hussain via B4 Relay
2026-01-28 10:37 ` Krzysztof Kozlowski
2026-01-28 11:21 ` Michal Simek
2026-01-28 14:34 ` Andrew Lunn
2026-01-28 14:38 ` Michal Simek
2026-01-28 14:40 ` Conor Dooley
2026-01-28 14:45 ` Andy Shevchenko
2026-01-28 15:00 ` Michal Simek
2026-01-28 15:43 ` Andy Shevchenko
2026-01-28 16:40 ` Abdurrahman Hussain
2026-01-29 16:14 ` Rob Herring
2026-01-30 5:33 ` Andy Shevchenko
2026-01-27 21:03 ` [PATCH v6 2/7] i2c: xiic: make the clock optional Abdurrahman Hussain via B4 Relay
2026-01-27 21:03 ` [PATCH v6 3/7] i2c: xiic: switch to devres managed APIs Abdurrahman Hussain via B4 Relay
2026-01-27 21:24 ` Andy Shevchenko
2026-01-27 21:03 ` [PATCH v6 4/7] i2c: xiic: remove duplicate error message Abdurrahman Hussain via B4 Relay
2026-01-27 21:03 ` Abdurrahman Hussain via B4 Relay [this message]
2026-01-27 21:04 ` [PATCH v6 6/7] i2c: xiic: cosmetic cleanup Abdurrahman Hussain via B4 Relay
2026-01-27 21:04 ` [PATCH v6 7/7] i2c xiic: cosmetic: use resource format specifier in debug log Abdurrahman Hussain via B4 Relay
2026-01-27 21:23 ` [PATCH v6 0/7] i2c: xiic: use generic device property accessors Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260127-i2c-xiic-v6-5-e82e2f6f657c@nexthop.ai \
--to=devnull+abdurrahman.nexthop.ai@kernel.org \
--cc=abdurrahman@nexthop.ai \
--cc=andi.shyti@kernel.org \
--cc=andriy.shevchenko@intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=info@mocean-labs.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®