From: Ryan Chen <ryan_chen@aspeedtech.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>,
<linux-riscv@lists.infradead.org>,
Ryan Chen <ryan_chen@aspeedtech.com>
Subject: [PATCH 3/4] irqchip/aspeed: Remove legacy AST2700 interrupt controller driver
Date: Thu, 5 Feb 2026 14:07:21 +0800 [thread overview]
Message-ID: <20260205-irqchip-v1-3-b0310e06c087@aspeedtech.com> (raw)
In-Reply-To: <20260205-irqchip-v1-0-b0310e06c087@aspeedtech.com>
The legacy driver was designed around a PSP-centric interrupt model and
cannot describe the full routing and protection capabilities of the
AST2700 interrupt architecture.
This driver is superseded by the new AST2700 INTC0/INTC1 drivers, which
provide a unified, block-level description suitable for all integrated
processors.
There are no known upstream users of the legacy
aspeed,ast2700-intc-ic compatible.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/irqchip/Makefile | 1 -
drivers/irqchip/irq-aspeed-intc.c | 139 --------------------------------------
2 files changed, 140 deletions(-)
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 51fdf269e436..ed547e90ae89 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -90,7 +90,6 @@ obj-$(CONFIG_LS_EXTIRQ) += irq-ls-extirq.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
obj-$(CONFIG_ASPEED_AST2700_INTC) += irq-ast2700.o irq-ast2700-intc0.o irq-ast2700-intc1.o
obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o
-obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-intc.o
obj-$(CONFIG_STM32MP_EXTI) += irq-stm32mp-exti.o
obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
diff --git a/drivers/irqchip/irq-aspeed-intc.c b/drivers/irqchip/irq-aspeed-intc.c
deleted file mode 100644
index 8330221799a0..000000000000
--- a/drivers/irqchip/irq-aspeed-intc.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Aspeed Interrupt Controller.
- *
- * Copyright (C) 2023 ASPEED Technology Inc.
- */
-
-#include <linux/bitops.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#define INTC_INT_ENABLE_REG 0x00
-#define INTC_INT_STATUS_REG 0x04
-#define INTC_IRQS_PER_WORD 32
-
-struct aspeed_intc_ic {
- void __iomem *base;
- raw_spinlock_t gic_lock;
- raw_spinlock_t intc_lock;
- struct irq_domain *irq_domain;
-};
-
-static void aspeed_intc_ic_irq_handler(struct irq_desc *desc)
-{
- struct aspeed_intc_ic *intc_ic = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- chained_irq_enter(chip, desc);
-
- scoped_guard(raw_spinlock, &intc_ic->gic_lock) {
- unsigned long bit, status;
-
- status = readl(intc_ic->base + INTC_INT_STATUS_REG);
- for_each_set_bit(bit, &status, INTC_IRQS_PER_WORD) {
- generic_handle_domain_irq(intc_ic->irq_domain, bit);
- writel(BIT(bit), intc_ic->base + INTC_INT_STATUS_REG);
- }
- }
-
- chained_irq_exit(chip, desc);
-}
-
-static void aspeed_intc_irq_mask(struct irq_data *data)
-{
- struct aspeed_intc_ic *intc_ic = irq_data_get_irq_chip_data(data);
- unsigned int mask = readl(intc_ic->base + INTC_INT_ENABLE_REG) & ~BIT(data->hwirq);
-
- guard(raw_spinlock)(&intc_ic->intc_lock);
- writel(mask, intc_ic->base + INTC_INT_ENABLE_REG);
-}
-
-static void aspeed_intc_irq_unmask(struct irq_data *data)
-{
- struct aspeed_intc_ic *intc_ic = irq_data_get_irq_chip_data(data);
- unsigned int unmask = readl(intc_ic->base + INTC_INT_ENABLE_REG) | BIT(data->hwirq);
-
- guard(raw_spinlock)(&intc_ic->intc_lock);
- writel(unmask, intc_ic->base + INTC_INT_ENABLE_REG);
-}
-
-static struct irq_chip aspeed_intc_chip = {
- .name = "ASPEED INTC",
- .irq_mask = aspeed_intc_irq_mask,
- .irq_unmask = aspeed_intc_irq_unmask,
-};
-
-static int aspeed_intc_ic_map_irq_domain(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler(irq, &aspeed_intc_chip, handle_level_irq);
- irq_set_chip_data(irq, domain->host_data);
-
- return 0;
-}
-
-static const struct irq_domain_ops aspeed_intc_ic_irq_domain_ops = {
- .map = aspeed_intc_ic_map_irq_domain,
-};
-
-static int __init aspeed_intc_ic_of_init(struct device_node *node,
- struct device_node *parent)
-{
- struct aspeed_intc_ic *intc_ic;
- int irq, i, ret = 0;
-
- intc_ic = kzalloc(sizeof(*intc_ic), GFP_KERNEL);
- if (!intc_ic)
- return -ENOMEM;
-
- intc_ic->base = of_iomap(node, 0);
- if (!intc_ic->base) {
- pr_err("Failed to iomap intc_ic base\n");
- ret = -ENOMEM;
- goto err_free_ic;
- }
- writel(0xffffffff, intc_ic->base + INTC_INT_STATUS_REG);
- writel(0x0, intc_ic->base + INTC_INT_ENABLE_REG);
-
- intc_ic->irq_domain = irq_domain_create_linear(of_fwnode_handle(node), INTC_IRQS_PER_WORD,
- &aspeed_intc_ic_irq_domain_ops, intc_ic);
- if (!intc_ic->irq_domain) {
- ret = -ENOMEM;
- goto err_iounmap;
- }
-
- raw_spin_lock_init(&intc_ic->gic_lock);
- raw_spin_lock_init(&intc_ic->intc_lock);
-
- /* Check all the irq numbers valid. If not, unmaps all the base and frees the data. */
- for (i = 0; i < of_irq_count(node); i++) {
- irq = irq_of_parse_and_map(node, i);
- if (!irq) {
- pr_err("Failed to get irq number\n");
- ret = -EINVAL;
- goto err_iounmap;
- }
- }
-
- for (i = 0; i < of_irq_count(node); i++) {
- irq = irq_of_parse_and_map(node, i);
- irq_set_chained_handler_and_data(irq, aspeed_intc_ic_irq_handler, intc_ic);
- }
-
- return 0;
-
-err_iounmap:
- iounmap(intc_ic->base);
-err_free_ic:
- kfree(intc_ic);
- return ret;
-}
-
-IRQCHIP_DECLARE(ast2700_intc_ic, "aspeed,ast2700-intc-ic", aspeed_intc_ic_of_init);
--
2.34.1
next prev parent reply other threads:[~2026-02-05 6:07 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-05 6:07 [PATCH 0/4] Add AST2700 INTC0/INTC1 support Ryan Chen
2026-02-05 6:07 ` [PATCH 1/4] dt-bindings: interrupt-controller: aspeed: Add ASPEED AST2700 INTC0/INTC1 Ryan Chen
2026-02-05 7:25 ` Rob Herring (Arm)
2026-02-05 8:53 ` Krzysztof Kozlowski
2026-02-05 6:07 ` [PATCH 2/4] irqchip/ast2700-intcx: Add AST2700 INTC0/INTC1 support Ryan Chen
2026-02-05 14:40 ` kernel test robot
2026-02-05 14:52 ` kernel test robot
2026-02-06 11:34 ` Thomas Gleixner
2026-02-07 3:50 ` Ryan Chen
2026-02-07 12:40 ` Thomas Gleixner
2026-02-08 2:27 ` Ryan Chen
2026-02-05 6:07 ` Ryan Chen [this message]
2026-02-05 6:07 ` [PATCH 4/4] dt-bindings: interrupt-controller: aspeed: Remove legacy AST2700 interrupt binding Ryan Chen
2026-02-05 8:56 ` Krzysztof Kozlowski
2026-02-05 8:58 ` [PATCH 0/4] Add AST2700 INTC0/INTC1 support Krzysztof Kozlowski
2026-02-05 9:49 ` Ryan Chen
2026-02-05 9:56 ` Krzysztof Kozlowski
2026-02-06 7:19 ` Andrew Jeffery
2026-02-10 7:25 ` Andrew Jeffery
2026-02-12 5:58 ` Ryan Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260205-irqchip-v1-3-b0310e06c087@aspeedtech.com \
--to=ryan_chen@aspeedtech.com \
--cc=alex@ghiti.fr \
--cc=andrew@codeconstruct.com.au \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®