From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Hans de Goede" <hansg@kernel.org>
Cc: Mark Pearson <mpearson-lenovo@squebb.ca>,
Armin Wolf <W_Armin@gmx.de>, Jonathan Corbet <corbet@lwn.net>,
Rong Zhang <i@rong.moe>, Kurt Borja <kuurtb@gmail.com>,
"Derek J . Clark" <derekjohn.clark@gmail.com>,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/6] platform-x86: lenovo-wmi: Add fixes and enhancement
Date: Sun, 15 Feb 2026 06:12:53 +0000 [thread overview]
Message-ID: <20260215061339.2842486-1-derekjohn.clark@gmail.com> (raw)
This series adds many much needed features and fixes to the lenovo-wmi
drivers.
Patch 1 adds a macro to make assigning attribute ID's for capdata
cleaner and easier.
Patch 2 addresses bugs where devices that don't support exposed
attributes would still create the attribute, and also attempts to
identify the correct capdata and set/get methods as some legacy
interfaces don't use the custom mode in the method or capdata ID.
Patch 3 adds the remaining CPU attributes that weren't previously
exposed.
Patch 4 adds the GPU attributes that weren't previously exposed.
Patch 5 consolidates name constants in preparation for patch 6.
Patch 6 adds battery charge-type limiting when supported only by WMI.
After applying Rong's series from
https://lore.kernel.org/platform-driver-x86/20260210191938.137234-1-i@rong.moe/
I found that there weren't any conflicts, so rather than combine
the series we can just review each separately.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
v2:
- Fix gpu_mode misisng from attributes list.
- Fix prototypes for power suppy patch.
- Reorganize CPU and GPU attributes alphabetically.
- Break out the patch consolidating the driver name cost.
- Move some of the refactoring of attribute_id back to into patch 1
where it belongs.
- Fix some additional typos in function prototypes.
v1: https://lore.kernel.org/platform-driver-x86/20260213081243.794288-1-derekjohn.clark@gmail.com/
Derek J. Clark (6):
platform/x86: lenovo-wmi-other: Add LWMI_ATTR_ID Macro
platform/x86: lenovo-wmi-other: Limit adding attributes to supported
devices
platform/x86: lenovo-wmi-other: Add missing CPU tunable attributes
platform/x86: lenovo-wmi-other: Add GPU tunable attributes
platform-x86: lenovo-wmi-other: Consolidate name into single const
platform/x86: lenovo-wmi-other: Add WMI battery charge limiting.
.../wmi/devices/lenovo-wmi-other.rst | 21 +
drivers/platform/x86/lenovo/wmi-capdata.h | 13 +-
drivers/platform/x86/lenovo/wmi-gamezone.h | 1 +
drivers/platform/x86/lenovo/wmi-other.c | 606 ++++++++++++++++--
4 files changed, 592 insertions(+), 49 deletions(-)
base-commit: 5a5203a45b063a594e89a2aeaf9e4923893a5b4c
--
2.52.0
next reply other threads:[~2026-02-15 6:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-15 6:12 Derek J. Clark [this message]
2026-02-15 6:12 ` [PATCH v2 1/6] platform/x86: lenovo-wmi-other: Add LWMI_ATTR_ID Macro Derek J. Clark
2026-02-15 6:12 ` [PATCH v2 2/6] platform/x86: lenovo-wmi-other: Limit adding attributes to supported devices Derek J. Clark
2026-02-17 23:54 ` Mark Pearson
2026-02-18 0:20 ` Derek J. Clark
2026-02-18 0:26 ` Mark Pearson
2026-02-15 6:12 ` [PATCH v2 3/6] platform/x86: lenovo-wmi-other: Add missing CPU tunable attributes Derek J. Clark
2026-02-15 6:12 ` [PATCH v2 4/6] platform/x86: lenovo-wmi-other: Add GPU " Derek J. Clark
2026-02-15 6:12 ` [PATCH v2 5/6] platform-x86: lenovo-wmi-other: Consolidate name into single const Derek J. Clark
2026-02-15 6:56 ` Kurt Borja
2026-02-15 7:22 ` Derek J. Clark
2026-02-15 6:12 ` [PATCH v2 6/6] platform/x86: lenovo-wmi-other: Add WMI battery charge limiting Derek J. Clark
2026-02-15 15:20 ` kernel test robot
2026-02-15 19:47 ` kernel test robot
2026-02-17 23:49 ` [PATCH v2 0/6] platform-x86: lenovo-wmi: Add fixes and enhancement Mark Pearson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260215061339.2842486-1-derekjohn.clark@gmail.com \
--to=derekjohn.clark@gmail.com \
--cc=W_Armin@gmx.de \
--cc=corbet@lwn.net \
--cc=hansg@kernel.org \
--cc=i@rong.moe \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kuurtb@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpearson-lenovo@squebb.ca \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®