[PATCH 0/4] Add support for hx83102-based Holitech HTF065H045 panel

[PATCH 0/4] Add support for hx83102-based Holitech HTF065H045 panel

[Val Packett]

This 720x1600 panel is found in several Motorola/Lenovo smartphones.
It will be used in the device tree for the Moto G9 Play (sm6115-motorola-guamp).
Fully tested on it, including brightness adjustment.

The initialization sequence is based on leaked documentation found online :)
as the sequence included in downstream Android DTS was near-empty (I think it
relies on the bootloader to do the bulk of the initialization).
That documentation is also the source for the exact model number (as it's the
same vendor, same controller IC, same resolution, and made for Motorola).

Thanks,
~val

Val Packett (4):
  dt-bindings: vendor-prefixes: Add Holitech
  dt-bindings: display: panel: Add compatible for Holitech HTF065H045
  drm/panel: himax-hx83102: Add support for Holitech HTF065H045
  drm/panel: himax-hx83102: Add support for DSI DCS backlight control

 .../bindings/display/panel/himax,hx83102.yaml |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/gpu/drm/panel/panel-himax-hx83102.c   | 151 ++++++++++++++++++
 3 files changed, 155 insertions(+)

-- 
2.52.0

[PATCH 1/4] dt-bindings: vendor-prefixes: Add Holitech

[Val Packett]

Jiangxi Holitech Technology Co., Ltd. is a manufacturer of display panels.

Signed-off-by: Val Packett <val@packett.cool>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 46d0287b2cd6..646e18985a9d 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -711,6 +711,8 @@ patternProperties:
     description: Hitex Development Tools
   "^hitron,.*":
     description: HiTRON Electronics Corporation
+  "^holitech,.*":
+    description: Jiangxi Holitech Technology Co., Ltd.
   "^holt,.*":
     description: Holt Integrated Circuits, Inc.
   "^holtek,.*":
-- 
2.52.0

Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Add Holitech

[Krzysztof Kozlowski]

On Tue, Feb 17, 2026 at 04:00:09AM -0300, Val Packett wrote:
> Jiangxi Holitech Technology Co., Ltd. is a manufacturer of display panels.
> 
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH 2/4] dt-bindings: display: panel: Add compatible for Holitech HTF065H045

[Val Packett]

Add a new compatible for the Holitech HTF065H045 panel that uses the
Himax HX83102 controller IC.

Signed-off-by: Val Packett <val@packett.cool>
---
 .../devicetree/bindings/display/panel/himax,hx83102.yaml        | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
index e4c1aa5deab9..66404b425af3 100644
--- a/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
@@ -20,6 +20,8 @@ properties:
           - boe,nv110wum-l60
           # CSOT pna957qt1-1 10.95" WUXGA TFT LCD panel
           - csot,pna957qt1-1
+          # Holitech HTF065H045 6.517" 720x1600 TFT LCD panel
+          - holitech,htf065h045
           # IVO t109nw41 11.0" WUXGA TFT LCD panel
           - ivo,t109nw41
           # KINGDISPLAY KD110N11-51IE 10.95" WUXGA TFT LCD panel
-- 
2.52.0

Re: [PATCH 2/4] dt-bindings: display: panel: Add compatible for Holitech HTF065H045

[Krzysztof Kozlowski]

On Tue, Feb 17, 2026 at 04:00:10AM -0300, Val Packett wrote:
> Add a new compatible for the Holitech HTF065H045 panel that uses the
> Himax HX83102 controller IC.
> 
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  .../devicetree/bindings/display/panel/himax,hx83102.yaml        | 2 ++
>  1 file changed, 2 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH 3/4] drm/panel: himax-hx83102: Add support for Holitech HTF065H045

[Val Packett]

This 720x1600 panel is found in several Motorola/Lenovo smartphones like
the Moto G9 Play (guamp). The initialization sequence is based on the
datasheet. Add it to the existing HX83102 panel driver.

Signed-off-by: Val Packett <val@packett.cool>
---
 drivers/gpu/drm/panel/panel-himax-hx83102.c | 86 +++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c b/drivers/gpu/drm/panel/panel-himax-hx83102.c
index 1d3bb5dca559..34e0e956db48 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx83102.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c
@@ -701,6 +701,67 @@ static int starry_2082109qfh040022_50e_init(struct hx83102 *ctx)
 	return dsi_ctx.accum_err;
 }
 
+static int holitech_htf065h045_init(struct hx83102 *ctx)
+{
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
+
+	msleep(50);
+
+	hx83102_enable_extended_cmds(&dsi_ctx, true);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x22, 0x44, 0x27, 0x27, 0x32,
+				     0x52, 0x57, 0x39, 0x08, 0x08, 0x08);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETDISP, 0x00, 0x00, 0x06, 0x40, 0x00,
+				     0x0e, 0xae, 0x38, 0x00, 0x00, 0x00, 0x00, 0xf4, 0xa0);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC, 0x01, 0x58, 0x01, 0x58, 0x01,
+				     0x58, 0x03, 0x58, 0x03, 0xff, 0x01, 0x20, 0x00, 0xff);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPANEL, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP0, 0x00, 0x00, 0x00, 0x00, 0x00,
+				     0x10, 0x00, 0x17, 0x00, 0x63, 0x37, 0x0e, 0x0e, 0x00, 0x00,
+				     0x32, 0x10, 0x08, 0x00, 0x08, 0x32, 0x16, 0x4e, 0x06, 0x4e);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPWM, 0x04, 0x0c, 0xb2, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP1, 0x24, 0x25, 0x18, 0x18, 0x19,
+				     0x19, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+				     0x18, 0x18, 0x18, 0x06, 0x07, 0x04, 0x05, 0x18, 0x18, 0x18,
+				     0x18, 0x02, 0x03, 0x00, 0x01, 0x20, 0x21, 0x18, 0x18, 0x18,
+				     0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP2, 0x00, 0x09, 0x16, 0x1f, 0x28,
+				     0x4b, 0x65, 0x6d, 0x74, 0x70, 0x89, 0x8d, 0x91, 0xa0, 0x9e,
+				     0xa8, 0xb2, 0xc8, 0xc9, 0x65, 0x6d, 0x78, 0x7f, 0x00, 0x09,
+				     0x16, 0x1f, 0x28, 0x4b, 0x65, 0x6d, 0x74, 0x70, 0x89, 0x8d,
+				     0x91, 0xa0, 0x9e, 0xa8, 0xb2, 0xc8, 0xc9, 0x65, 0x6d, 0x78,
+				     0x7f);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1, 0xff, 0x14, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3, 0xff, 0xff, 0xff, 0xff, 0xff,
+				     0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x03);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+				     0xa0, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0, 0xaa, 0xaa, 0xaa,
+				     0xaa, 0xaa, 0xa0, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETMIPI, 0x70, 0x23, 0xa8, 0x93, 0xb2,
+				     0xc0, 0xc0, 0x01, 0x10, 0x00, 0x00, 0x00, 0x0d, 0x3d, 0x82,
+				     0x77, 0x04, 0x01, 0x04);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK, 0x00, 0x53, 0x00, 0x02, 0x59);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPTBA, 0xfc, 0x00, 0x04, 0x9e, 0xf6,
+				     0x00, 0x5d);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC, 0x42, 0x00, 0x33, 0x00, 0x33,
+				     0x88, 0xb3, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPCTRL, 0x20, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x7f, 0x03, 0xf5);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
+
+	return dsi_ctx.accum_err;
+}
+
 static const struct drm_display_mode starry_mode = {
 	.clock = 162680,
 	.hdisplay = 1200,
@@ -833,6 +894,28 @@ static const struct hx83102_panel_desc starry_2082109qfh040022_50e_desc = {
 	.init = starry_2082109qfh040022_50e_init,
 };
 
+static const struct drm_display_mode holitech_htf065h045_default_mode = {
+	.clock = 90720,
+	.hdisplay = 720,
+	.hsync_start = 720 + 40,
+	.hsync_end = 720 + 40 + 40,
+	.htotal = 720 + 40 + 40 + 40,
+	.vdisplay = 1600,
+	.vsync_start = 1600 + 186,
+	.vsync_end = 1600 + 186 + 2,
+	.vtotal = 1600 + 186 + 2 + 12,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct hx83102_panel_desc holitech_htf065h045_desc = {
+	.modes = &holitech_htf065h045_default_mode,
+	.size = {
+		.width_mm = 68,
+		.height_mm = 151,
+	},
+	.init = holitech_htf065h045_init,
+};
+
 static int hx83102_enable(struct drm_panel *panel)
 {
 	msleep(130);
@@ -1069,6 +1152,9 @@ static const struct of_device_id hx83102_of_match[] = {
 	{ .compatible = "starry,himax83102-j02",
 	  .data = &starry_desc
 	},
+	{ .compatible = "holitech,htf065h045",
+	  .data = &holitech_htf065h045_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, hx83102_of_match);
-- 
2.52.0

Re: [PATCH 3/4] drm/panel: himax-hx83102: Add support for Holitech HTF065H045

[Neil Armstrong]

On 2/17/26 08:00, Val Packett wrote:
> This 720x1600 panel is found in several Motorola/Lenovo smartphones like
> the Moto G9 Play (guamp). The initialization sequence is based on the
> datasheet. Add it to the existing HX83102 panel driver.
> 
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx83102.c | 86 +++++++++++++++++++++
>   1 file changed, 86 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c b/drivers/gpu/drm/panel/panel-himax-hx83102.c
> index 1d3bb5dca559..34e0e956db48 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx83102.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c
> @@ -701,6 +701,67 @@ static int starry_2082109qfh040022_50e_init(struct hx83102 *ctx)
>   	return dsi_ctx.accum_err;
>   }
>   
> +static int holitech_htf065h045_init(struct hx83102 *ctx)
> +{
> +	struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
> +
> +	msleep(50);
> +
> +	hx83102_enable_extended_cmds(&dsi_ctx, true);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x22, 0x44, 0x27, 0x27, 0x32,
> +				     0x52, 0x57, 0x39, 0x08, 0x08, 0x08);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETDISP, 0x00, 0x00, 0x06, 0x40, 0x00,
> +				     0x0e, 0xae, 0x38, 0x00, 0x00, 0x00, 0x00, 0xf4, 0xa0);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC, 0x01, 0x58, 0x01, 0x58, 0x01,
> +				     0x58, 0x03, 0x58, 0x03, 0xff, 0x01, 0x20, 0x00, 0xff);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPANEL, 0x02);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP0, 0x00, 0x00, 0x00, 0x00, 0x00,
> +				     0x10, 0x00, 0x17, 0x00, 0x63, 0x37, 0x0e, 0x0e, 0x00, 0x00,
> +				     0x32, 0x10, 0x08, 0x00, 0x08, 0x32, 0x16, 0x4e, 0x06, 0x4e);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPWM, 0x04, 0x0c, 0xb2, 0x01);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP1, 0x24, 0x25, 0x18, 0x18, 0x19,
> +				     0x19, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> +				     0x18, 0x18, 0x18, 0x06, 0x07, 0x04, 0x05, 0x18, 0x18, 0x18,
> +				     0x18, 0x02, 0x03, 0x00, 0x01, 0x20, 0x21, 0x18, 0x18, 0x18,
> +				     0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP2, 0x00, 0x09, 0x16, 0x1f, 0x28,
> +				     0x4b, 0x65, 0x6d, 0x74, 0x70, 0x89, 0x8d, 0x91, 0xa0, 0x9e,
> +				     0xa8, 0xb2, 0xc8, 0xc9, 0x65, 0x6d, 0x78, 0x7f, 0x00, 0x09,
> +				     0x16, 0x1f, 0x28, 0x4b, 0x65, 0x6d, 0x74, 0x70, 0x89, 0x8d,
> +				     0x91, 0xa0, 0x9e, 0xa8, 0xb2, 0xc8, 0xc9, 0x65, 0x6d, 0x78,
> +				     0x7f);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1, 0xff, 0x14, 0x00, 0x00);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETTP1, 0x01);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3, 0xff, 0xff, 0xff, 0xff, 0xff,
> +				     0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x03);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETGIP3, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
> +				     0xa0, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0, 0xaa, 0xaa, 0xaa,
> +				     0xaa, 0xaa, 0xa0, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xa0);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETMIPI, 0x70, 0x23, 0xa8, 0x93, 0xb2,
> +				     0xc0, 0xc0, 0x01, 0x10, 0x00, 0x00, 0x00, 0x0d, 0x3d, 0x82,
> +				     0x77, 0x04, 0x01, 0x04);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x01);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK, 0x01);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCLOCK, 0x00, 0x53, 0x00, 0x02, 0x59);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPTBA, 0xfc, 0x00, 0x04, 0x9e, 0xf6,
> +				     0x00, 0x5d);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETCYC, 0x42, 0x00, 0x33, 0x00, 0x33,
> +				     0x88, 0xb3, 0x00);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPCTRL, 0x20, 0x01);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x02);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x7f, 0x03, 0xf5);
> +	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETBANK, 0x00);
> +
> +	return dsi_ctx.accum_err;
> +}
> +
>   static const struct drm_display_mode starry_mode = {
>   	.clock = 162680,
>   	.hdisplay = 1200,
> @@ -833,6 +894,28 @@ static const struct hx83102_panel_desc starry_2082109qfh040022_50e_desc = {
>   	.init = starry_2082109qfh040022_50e_init,
>   };
>   
> +static const struct drm_display_mode holitech_htf065h045_default_mode = {
> +	.clock = 90720,
> +	.hdisplay = 720,
> +	.hsync_start = 720 + 40,
> +	.hsync_end = 720 + 40 + 40,
> +	.htotal = 720 + 40 + 40 + 40,
> +	.vdisplay = 1600,
> +	.vsync_start = 1600 + 186,
> +	.vsync_end = 1600 + 186 + 2,
> +	.vtotal = 1600 + 186 + 2 + 12,
> +	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
> +static const struct hx83102_panel_desc holitech_htf065h045_desc = {
> +	.modes = &holitech_htf065h045_default_mode,
> +	.size = {
> +		.width_mm = 68,
> +		.height_mm = 151,
> +	},
> +	.init = holitech_htf065h045_init,
> +};
> +
>   static int hx83102_enable(struct drm_panel *panel)
>   {
>   	msleep(130);
> @@ -1069,6 +1152,9 @@ static const struct of_device_id hx83102_of_match[] = {
>   	{ .compatible = "starry,himax83102-j02",
>   	  .data = &starry_desc
>   	},
> +	{ .compatible = "holitech,htf065h045",
> +	  .data = &holitech_htf065h045_desc
> +	},
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, hx83102_of_match);

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil

Re: [PATCH 3/4] drm/panel: himax-hx83102: Add support for Holitech HTF065H045

[Val Packett]

On 3/4/26 1:26 PM, Neil Armstrong wrote:
> On 2/17/26 08:00, Val Packett wrote:
>> This 720x1600 panel is found in several Motorola/Lenovo smartphones like
>> the Moto G9 Play (guamp). The initialization sequence is based on the
>> datasheet. Add it to the existing HX83102 panel driver.
>>
>> Signed-off-by: Val Packett <val@packett.cool>
>> ---
>>   drivers/gpu/drm/panel/panel-himax-hx83102.c | 86 +++++++++++++++++++++
>>   1 file changed, 86 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c 
>> b/drivers/gpu/drm/panel/panel-himax-hx83102.c
>> index 1d3bb5dca559..34e0e956db48 100644
>> --- a/drivers/gpu/drm/panel/panel-himax-hx83102.c
>> +++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c
>> @@ -701,6 +701,67 @@ static int 
>> starry_2082109qfh040022_50e_init(struct hx83102 *ctx)
>>       return dsi_ctx.accum_err;
>>   }
>>   +static int holitech_htf065h045_init(struct hx83102 *ctx)
>> +{
>> +    struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
>> +
>> +    msleep(50);
>> +
>> +    hx83102_enable_extended_cmds(&dsi_ctx, true);

BTW I have noticed since that the enable-extended "password" command in 
the doc mentions the model of the IC: {83, 10, 2D} for 83102D, not {83, 
10, 21, 55, 00}.

Works fine either way, can't say I'm really noticing any visible changes 
from the init sequence, but I'll adjust it to be accurate for v2, can I 
keep the R-b?

Thanks,
~val

[PATCH 4/4] drm/panel: himax-hx83102: Add support for DSI DCS backlight control

[Val Packett]

The HTF065H045 panel based on the HX83102 controller does use DCS
commands for controlling backlight brightness. Make the driver fall back
to DCS when no external backlight has been defined in the device tree,
like many other drivers do.

Signed-off-by: Val Packett <val@packett.cool>
---
 drivers/gpu/drm/panel/panel-himax-hx83102.c | 65 +++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c b/drivers/gpu/drm/panel/panel-himax-hx83102.c
index 34e0e956db48..8b2a68ee851e 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx83102.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c
@@ -7,6 +7,7 @@
  * Based on drivers/gpu/drm/panel/panel-himax-hx8394.c
  */
 
+#include <linux/backlight.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
@@ -76,6 +77,8 @@ struct hx83102_panel_desc {
 		unsigned int height_mm;
 	} size;
 
+	bool has_backlight;
+
 	int (*init)(struct hx83102 *ctx);
 };
 
@@ -913,6 +916,7 @@ static const struct hx83102_panel_desc holitech_htf065h045_desc = {
 		.width_mm = 68,
 		.height_mm = 151,
 	},
+	.has_backlight = true,
 	.init = holitech_htf065h045_init,
 };
 
@@ -1049,6 +1053,59 @@ static const struct drm_panel_funcs hx83102_drm_funcs = {
 	.get_orientation = hx83102_get_orientation,
 };
 
+static int hx83102_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static int hx83102_bl_get_brightness(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return brightness;
+}
+
+static const struct backlight_ops hx83102_bl_ops = {
+	.update_status = hx83102_bl_update_status,
+	.get_brightness = hx83102_bl_get_brightness,
+};
+
+static struct backlight_device *
+hx83102_create_dcs_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 4095,
+		.max_brightness = 4095,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &hx83102_bl_ops, &props);
+}
+
 static int hx83102_panel_add(struct hx83102 *ctx)
 {
 	struct device *dev = &ctx->dsi->dev;
@@ -1080,6 +1137,14 @@ static int hx83102_panel_add(struct hx83102 *ctx)
 	if (err)
 		return err;
 
+	/* Use DSI-based backlight as fallback if available */
+	if (ctx->desc->has_backlight && !ctx->base.backlight) {
+		ctx->base.backlight = hx83102_create_dcs_backlight(ctx->dsi);
+		if (IS_ERR(ctx->base.backlight))
+			return dev_err_probe(dev, PTR_ERR(ctx->base.backlight),
+					     "Failed to create backlight\n");
+	}
+
 	ctx->base.funcs = &hx83102_drm_funcs;
 	ctx->base.dev = &ctx->dsi->dev;
 
-- 
2.52.0

Re: [PATCH 4/4] drm/panel: himax-hx83102: Add support for DSI DCS backlight control

[Neil Armstrong]

On 2/17/26 08:00, Val Packett wrote:
> The HTF065H045 panel based on the HX83102 controller does use DCS
> commands for controlling backlight brightness. Make the driver fall back
> to DCS when no external backlight has been defined in the device tree,
> like many other drivers do.
> 
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx83102.c | 65 +++++++++++++++++++++
>   1 file changed, 65 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c b/drivers/gpu/drm/panel/panel-himax-hx83102.c
> index 34e0e956db48..8b2a68ee851e 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx83102.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c
> @@ -7,6 +7,7 @@
>    * Based on drivers/gpu/drm/panel/panel-himax-hx8394.c
>    */
>   
> +#include <linux/backlight.h>
>   #include <linux/delay.h>
>   #include <linux/gpio/consumer.h>
>   #include <linux/module.h>
> @@ -76,6 +77,8 @@ struct hx83102_panel_desc {
>   		unsigned int height_mm;
>   	} size;
>   
> +	bool has_backlight;
> +
>   	int (*init)(struct hx83102 *ctx);
>   };
>   
> @@ -913,6 +916,7 @@ static const struct hx83102_panel_desc holitech_htf065h045_desc = {
>   		.width_mm = 68,
>   		.height_mm = 151,
>   	},
> +	.has_backlight = true,
>   	.init = holitech_htf065h045_init,
>   };
>   
> @@ -1049,6 +1053,59 @@ static const struct drm_panel_funcs hx83102_drm_funcs = {
>   	.get_orientation = hx83102_get_orientation,
>   };
>   
> +static int hx83102_bl_update_status(struct backlight_device *bl)
> +{
> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
> +	u16 brightness = backlight_get_brightness(bl);
> +	int ret;
> +
> +	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
> +	if (ret < 0)
> +		return ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	return 0;
> +}
> +
> +static int hx83102_bl_get_brightness(struct backlight_device *bl)
> +{
> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
> +	u16 brightness;
> +	int ret;
> +
> +	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
> +	if (ret < 0)
> +		return ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	return brightness;
> +}
> +
> +static const struct backlight_ops hx83102_bl_ops = {
> +	.update_status = hx83102_bl_update_status,
> +	.get_brightness = hx83102_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +hx83102_create_dcs_backlight(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	const struct backlight_properties props = {
> +		.type = BACKLIGHT_RAW,
> +		.brightness = 4095,
> +		.max_brightness = 4095,

I guess those values could be in the hx83102_panel_desc.

Anyway:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil

> +	};
> +
> +	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> +					      &hx83102_bl_ops, &props);
> +}
> +
>   static int hx83102_panel_add(struct hx83102 *ctx)
>   {
>   	struct device *dev = &ctx->dsi->dev;
> @@ -1080,6 +1137,14 @@ static int hx83102_panel_add(struct hx83102 *ctx)
>   	if (err)
>   		return err;
>   
> +	/* Use DSI-based backlight as fallback if available */
> +	if (ctx->desc->has_backlight && !ctx->base.backlight) {
> +		ctx->base.backlight = hx83102_create_dcs_backlight(ctx->dsi);
> +		if (IS_ERR(ctx->base.backlight))
> +			return dev_err_probe(dev, PTR_ERR(ctx->base.backlight),
> +					     "Failed to create backlight\n");
> +	}
> +
>   	ctx->base.funcs = &hx83102_drm_funcs;
>   	ctx->base.dev = &ctx->dsi->dev;
>   

Re: [PATCH 4/4] drm/panel: himax-hx83102: Add support for DSI DCS backlight control

[David Heidelberg]

On 17/02/2026 08:00, Val Packett wrote:

[...]

> +
> +static struct backlight_device *
> +hx83102_create_dcs_backlight(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	const struct backlight_properties props = {
> +		.type = BACKLIGHT_RAW,
> +		.brightness = 4095,

Series looks good, just nitpick here.

While this is not OLED, where full brightness reduces the lifetime of display a 
lot, are you sure you want to bring the display backlight up to 100% by default?

Usually I've and others put ~ 50%. It's important to keep display well readable 
until userspace takes over, but not have to be full-throttle :)

David

[...]

-- 
David Heidelberg

Re: [PATCH 0/4] Add support for hx83102-based Holitech HTF065H045 panel

[David Heidelberg]

On 17/02/2026 08:00, Val Packett wrote:
> This 720x1600 panel is found in several Motorola/Lenovo smartphones.
> It will be used in the device tree for the Moto G9 Play (sm6115-motorola-guamp).
> Fully tested on it, including brightness adjustment.
> 
> The initialization sequence is based on leaked documentation found online :)
> as the sequence included in downstream Android DTS was near-empty (I think it
> relies on the bootloader to do the bulk of the initialization).

Depends how bad is the driver in Android, but generally when panel is powered 
down (not with DSI command, but regulator-wise) it needs full sequence to 
power-on. This implies the Android driver should (but maybe doesn't?) do full 
initialization.

You can also extract the sequence from the EFI bootloader firmware image (it's 
XML file) and verify (if you want to).

> That documentation is also the source for the exact model number (as it's the
> same vendor, same controller IC, same resolution, and made for Motorola).
> 
> Thanks,
> ~val
> 
> Val Packett (4):
>    dt-bindings: vendor-prefixes: Add Holitech
>    dt-bindings: display: panel: Add compatible for Holitech HTF065H045
>    drm/panel: himax-hx83102: Add support for Holitech HTF065H045
>    drm/panel: himax-hx83102: Add support for DSI DCS backlight control
> 
>   .../bindings/display/panel/himax,hx83102.yaml |   2 +
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>   drivers/gpu/drm/panel/panel-himax-hx83102.c   | 151 ++++++++++++++++++
>   3 files changed, 155 insertions(+)
> 

-- 
David Heidelberg

Re: (subset) [PATCH 0/4] Add support for hx83102-based Holitech HTF065H045 panel

[Neil Armstrong]

Hi,

On Tue, 17 Feb 2026 04:00:08 -0300, Val Packett wrote:
> This 720x1600 panel is found in several Motorola/Lenovo smartphones.
> It will be used in the device tree for the Moto G9 Play (sm6115-motorola-guamp).
> Fully tested on it, including brightness adjustment.
> 
> The initialization sequence is based on leaked documentation found online :)
> as the sequence included in downstream Android DTS was near-empty (I think it
> relies on the bootloader to do the bulk of the initialization).
> That documentation is also the source for the exact model number (as it's the
> same vendor, same controller IC, same resolution, and made for Motorola).
> 
> [...]

Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

[1/4] dt-bindings: vendor-prefixes: Add Holitech
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/c122ddd573a90363d18d5f08aefc48f98b40c3d4
[2/4] dt-bindings: display: panel: Add compatible for Holitech HTF065H045
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/896e7b8c1780734833abaa795fad7eec0cae8125
[3/4] drm/panel: himax-hx83102: Add support for Holitech HTF065H045
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/cc72a4734829648465d52484620951199d2ab1e7
[4/4] drm/panel: himax-hx83102: Add support for DSI DCS backlight control
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/987170d0b8da06a399d867c609b5689f3e8dfdb0

-- 
Neil