mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mikko Perttunen <mperttunen@nvidia.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <ukleinek@kernel.org>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: linux-pwm@vger.kernel.org, linux-tegra@vger.kernel.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 Yi-Wei Wang <yiweiw@nvidia.com>,
	Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v4 4/7] pwm: tegra: Parametrize enable register offset
Date: Tue, 31 Mar 2026 11:12:16 +0900	[thread overview]
Message-ID: <20260331-t264-pwm-v4-4-c041659677cf@nvidia.com> (raw)
In-Reply-To: <20260331-t264-pwm-v4-0-c041659677cf@nvidia.com>

On Tegra264, the PWM enablement bit is not located at the base address
of the PWM controller. Hence, introduce an enablement offset field in
the tegra_pwm_soc structure to describe the offset of the register.

Co-developed-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
 drivers/pwm/pwm-tegra.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 358c81cea05b..b925ef914411 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -61,6 +61,7 @@
 
 struct tegra_pwm_soc {
 	unsigned int num_channels;
+	unsigned int enable_reg;
 };
 
 struct tegra_pwm_chip {
@@ -197,8 +198,9 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		err = pm_runtime_resume_and_get(pwmchip_parent(chip));
 		if (err)
 			return err;
-	} else
+	} else if (pc->soc->enable_reg == PWM_CSR_0) {
 		val |= PWM_ENABLE;
+	}
 
 	pwm_writel(pwm, PWM_CSR_0, val);
 
@@ -213,6 +215,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 
 static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
 	int rc = 0;
 	u32 val;
 
@@ -220,20 +223,22 @@ static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	if (rc)
 		return rc;
 
-	val = pwm_readl(pwm, PWM_CSR_0);
+
+	val = pwm_readl(pwm, pc->soc->enable_reg);
 	val |= PWM_ENABLE;
-	pwm_writel(pwm, PWM_CSR_0, val);
+	pwm_writel(pwm, pc->soc->enable_reg, val);
 
 	return 0;
 }
 
 static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
+	struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
 	u32 val;
 
-	val = pwm_readl(pwm, PWM_CSR_0);
+	val = pwm_readl(pwm, pc->soc->enable_reg);
 	val &= ~PWM_ENABLE;
-	pwm_writel(pwm, PWM_CSR_0, val);
+	pwm_writel(pwm, pc->soc->enable_reg, val);
 
 	pm_runtime_put_sync(pwmchip_parent(chip));
 }
@@ -398,10 +403,12 @@ static int __maybe_unused tegra_pwm_runtime_resume(struct device *dev)
 
 static const struct tegra_pwm_soc tegra20_pwm_soc = {
 	.num_channels = 4,
+	.enable_reg = PWM_CSR_0,
 };
 
 static const struct tegra_pwm_soc tegra186_pwm_soc = {
 	.num_channels = 1,
+	.enable_reg = PWM_CSR_0,
 };
 
 static const struct of_device_id tegra_pwm_of_match[] = {

-- 
2.53.0


  parent reply	other threads:[~2026-03-31  2:12 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-31  2:12 [PATCH v4 0/7] Tegra264 PWM support Mikko Perttunen
2026-03-31  2:12 ` [PATCH v4 1/7] dt-bindings: pwm: Document Tegra264 controller Mikko Perttunen
2026-04-08 13:27   ` Rob Herring (Arm)
2026-03-31  2:12 ` [PATCH v4 2/7] pwm: tegra: Avoid hard-coded max clock frequency Mikko Perttunen
2026-03-31  7:29   ` Thierry Reding
2026-03-31  2:12 ` [PATCH v4 3/7] pwm: tegra: Modify read/write accessors for multi-register channel Mikko Perttunen
2026-05-17 17:30   ` Uwe Kleine-König
2026-05-18  2:31     ` Mikko Perttunen
2026-03-31  2:12 ` Mikko Perttunen [this message]
2026-03-31  7:30   ` [PATCH v4 4/7] pwm: tegra: Parametrize enable register offset Thierry Reding
2026-05-17 17:35   ` Uwe Kleine-König
2026-05-18  2:30     ` Mikko Perttunen
2026-03-31  2:12 ` [PATCH v4 5/7] pwm: tegra: Parametrize duty and scale field widths Mikko Perttunen
2026-03-31  2:12 ` [PATCH v4 6/7] pwm: tegra: Add support for Tegra264 Mikko Perttunen
2026-03-31  7:36   ` Thierry Reding
2026-03-31  2:12 ` [PATCH v4 7/7] arm64: tegra: Add PWM controllers on Tegra264 Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260331-t264-pwm-v4-4-c041659677cf@nvidia.com \
    --to=mperttunen@nvidia.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=ukleinek@kernel.org \
    --cc=yiweiw@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®