mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mikko Perttunen <mperttunen@nvidia.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <ukleinek@kernel.org>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: linux-pwm@vger.kernel.org, linux-tegra@vger.kernel.org,
	 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	 Yi-Wei Wang <yiweiw@nvidia.com>,
	Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v4 6/7] pwm: tegra: Add support for Tegra264
Date: Tue, 31 Mar 2026 11:12:18 +0900	[thread overview]
Message-ID: <20260331-t264-pwm-v4-6-c041659677cf@nvidia.com> (raw)
In-Reply-To: <20260331-t264-pwm-v4-0-c041659677cf@nvidia.com>

Tegra264 changes the register layout to accommodate wider fields
for duty and scale, and adds configurable depth which will be
supported in a later patch.

Add SoC data and update top comment to describe register layout
in more detail.

Co-developed-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Yi-Wei Wang <yiweiw@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
 drivers/pwm/pwm-tegra.c | 75 ++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 61 insertions(+), 14 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index d7968521fbfd..c9d30724e339 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -7,22 +7,60 @@
  * Copyright (c) 2010-2020, NVIDIA Corporation.
  * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <s.hauer@pengutronix.de>
  *
- * Overview of Tegra Pulse Width Modulator Register:
- * 1. 13-bit: Frequency division (SCALE)
- * 2. 8-bit : Pulse division (DUTY)
- * 3. 1-bit : Enable bit
+ * Overview of Tegra Pulse Width Modulator Register
+ * CSR_0 of Tegra20, Tegra186, and Tegra194:
+ * +-------+-------+-----------------------------------------------------------+
+ * | Bit   | Field | Description                                               |
+ * +-------+-------+-----------------------------------------------------------+
+ * | 31    | ENB   | Enable Pulse width modulator.                             |
+ * |       |       | 0 = DISABLE, 1 = ENABLE.                                  |
+ * +-------+-------+-----------------------------------------------------------+
+ * | 30:16 | PWM_0 | Pulse width that needs to be programmed.                  |
+ * |       |       | 0 = Always low.                                           |
+ * |       |       | 1 = 1 / 256 pulse high.                                   |
+ * |       |       | 2 = 2 / 256 pulse high.                                   |
+ * |       |       | N = N / 256 pulse high.                                   |
+ * |       |       | Only 8 bits are usable [23:16].                           |
+ * |       |       | Bit[24] can be programmed to 1 to achieve 100% duty       |
+ * |       |       | cycle. In this case the other bits [23:16] are set to     |
+ * |       |       | don’t care.                                               |
+ * +-------+-------+-----------------------------------------------------------+
+ * | 12:0  | PFM_0 | Frequency divider that needs to be programmed, also known |
+ * |       |       | as SCALE. Division by (1 + PFM_0).                        |
+ * +-------+-------+-----------------------------------------------------------+
  *
- * The PWM clock frequency is divided by 256 before subdividing it based
- * on the programmable frequency division value to generate the required
- * frequency for PWM output. The maximum output frequency that can be
- * achieved is (max rate of source clock) / 256.
- * e.g. if source clock rate is 408 MHz, maximum output frequency can be:
- * 408 MHz/256 = 1.6 MHz.
- * This 1.6 MHz frequency can further be divided using SCALE value in PWM.
+ * CSR_0 of Tegra264:
+ * +-------+-------+-----------------------------------------------------------+
+ * | Bit   | Field | Description                                               |
+ * +-------+-------+-----------------------------------------------------------+
+ * | 31:16 | PWM_0 | Pulse width that needs to be programmed.                  |
+ * |       |       | 0 = Always low.                                           |
+ * |       |       | 1 = 1 / (1 + CSR_1.DEPTH) pulse high.                     |
+ * |       |       | 2 = 2 / (1 + CSR_1.DEPTH) pulse high.                     |
+ * |       |       | N = N / (1 + CSR_1.DEPTH) pulse high.                     |
+ * +-------+-------+-----------------------------------------------------------+
+ * | 15:0  | PFM_0 | Frequency divider that needs to be programmed, also known |
+ * |       |       | as SCALE. Division by (1 + PFM_0).                        |
+ * +-------+-------+-----------------------------------------------------------+
+ *
+ * CSR_1 of Tegra264:
+ * +-------+-------+-----------------------------------------------------------+
+ * | Bit   | Field | Description                                               |
+ * +-------+-------+-----------------------------------------------------------+
+ * | 31    | ENB   | Enable Pulse width modulator.                             |
+ * |       |       | 0 = DISABLE, 1 = ENABLE.                                  |
+ * +-------+-------+-----------------------------------------------------------+
+ * | 30:15 | DEPTH | Depth for pulse width modulator. This controls the pulse  |
+ * |       |       | time generated. Division by (1 + CSR_1.DEPTH).            |
+ * +-------+-------+-----------------------------------------------------------+
  *
- * PWM pulse width: 8 bits are usable [23:16] for varying pulse width.
- * To achieve 100% duty cycle, program Bit [24] of this register to
- * 1’b1. In which case the other bits [23:16] are set to don't care.
+ * The PWM clock frequency is divided by DEPTH = (1 + CSR_1.DEPTH) before subdividing it
+ * based on the programmable frequency division value to generate the required frequency
+ * for PWM output. DEPTH is fixed to 256 before Tegra264. The maximum output frequency
+ * that can be achieved is (max rate of source clock) / DEPTH.
+ * e.g. if source clock rate is 408 MHz, and DEPTH = 256, maximum output frequency can be:
+ * 408 MHz / 256 ~= 1.6 MHz.
+ * This 1.6 MHz frequency can further be divided using SCALE value in PWM.
  *
  * Limitations:
  * -	When PWM is disabled, the output is driven to inactive.
@@ -56,6 +94,7 @@
 #define PWM_SCALE_SHIFT	0
 
 #define PWM_CSR_0	0
+#define PWM_CSR_1	4
 
 #define PWM_DEPTH	256
 
@@ -418,10 +457,18 @@ static const struct tegra_pwm_soc tegra186_pwm_soc = {
 	.scale_width = 13,
 };
 
+static const struct tegra_pwm_soc tegra264_pwm_soc = {
+	.num_channels = 1,
+	.enable_reg = PWM_CSR_1,
+	.duty_width = 16,
+	.scale_width = 16,
+};
+
 static const struct of_device_id tegra_pwm_of_match[] = {
 	{ .compatible = "nvidia,tegra20-pwm", .data = &tegra20_pwm_soc },
 	{ .compatible = "nvidia,tegra186-pwm", .data = &tegra186_pwm_soc },
 	{ .compatible = "nvidia,tegra194-pwm", .data = &tegra186_pwm_soc },
+	{ .compatible = "nvidia,tegra264-pwm", .data = &tegra264_pwm_soc },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);

-- 
2.53.0


  parent reply	other threads:[~2026-03-31  2:13 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-31  2:12 [PATCH v4 0/7] Tegra264 PWM support Mikko Perttunen
2026-03-31  2:12 ` [PATCH v4 1/7] dt-bindings: pwm: Document Tegra264 controller Mikko Perttunen
2026-04-08 13:27   ` Rob Herring (Arm)
2026-03-31  2:12 ` [PATCH v4 2/7] pwm: tegra: Avoid hard-coded max clock frequency Mikko Perttunen
2026-03-31  7:29   ` Thierry Reding
2026-03-31  2:12 ` [PATCH v4 3/7] pwm: tegra: Modify read/write accessors for multi-register channel Mikko Perttunen
2026-05-17 17:30   ` Uwe Kleine-König
2026-05-18  2:31     ` Mikko Perttunen
2026-03-31  2:12 ` [PATCH v4 4/7] pwm: tegra: Parametrize enable register offset Mikko Perttunen
2026-03-31  7:30   ` Thierry Reding
2026-05-17 17:35   ` Uwe Kleine-König
2026-05-18  2:30     ` Mikko Perttunen
2026-03-31  2:12 ` [PATCH v4 5/7] pwm: tegra: Parametrize duty and scale field widths Mikko Perttunen
2026-03-31  2:12 ` Mikko Perttunen [this message]
2026-03-31  7:36   ` [PATCH v4 6/7] pwm: tegra: Add support for Tegra264 Thierry Reding
2026-03-31  2:12 ` [PATCH v4 7/7] arm64: tegra: Add PWM controllers on Tegra264 Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260331-t264-pwm-v4-6-c041659677cf@nvidia.com \
    --to=mperttunen@nvidia.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=ukleinek@kernel.org \
    --cc=yiweiw@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®