mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Koichiro Den <den@valinux.co.jp>
To: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
	Manivannan Sadhasivam <mani@kernel.org>
Cc: Marek Vasut <marek.vasut+renesas@mailbox.org>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 04/12] dmaengine: dw-edma: Add partial channel ownership mode
Date: Thu, 21 May 2026 15:31:07 +0900	[thread overview]
Message-ID: <20260521063115.2842238-5-den@valinux.co.jp> (raw)
In-Reply-To: <20260521063115.2842238-1-den@valinux.co.jp>

Some endpoint DMA frontends expose only a subset of a controller that is
also initialized by the endpoint-side OS. Add a partial ownership flag
so dw-edma does not reset controller-wide state in probe() or remove().

Keep the mode conservative. Do not enable interrupt-emulation doorbells,
and reject eDMA legacy mode because it uses a shared viewport selector.
For EDMA_MF_EDMA_UNROLL and EDMA_MF_HDMA_COMPAT, require ownership of
all channels in each exposed direction. The driver updates registers
shared by all channels in a direction, such as interrupt masks and
linked-list error enables, so two independent OS instances cannot safely
split one direction without a shared locking protocol, which is
unrealistic.

The frontend must still quiesce delegated channels before removing a
partial instance. The flag only keeps probe() and remove() from
resetting controller-wide state that may belong to a peer OS instance.

Signed-off-by: Koichiro Den <den@valinux.co.jp>
---
 drivers/dma/dw-edma/dw-edma-core.c | 43 +++++++++++++++++++++++-------
 include/linux/dma/edma.h           |  6 +++++
 2 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index 72dc8a60798a..ec32a2ab1651 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -784,6 +784,9 @@ static int dw_edma_emul_irq_alloc(struct dw_edma *dw)
 	chip->db_irq = 0;
 	chip->db_offset = ~0;
 
+	if (chip->flags & DW_EDMA_CHIP_PARTIAL)
+		return 0;
+
 	/*
 	 * Only meaningful when the core provides the deassert sequence
 	 * for interrupt emulation.
@@ -1128,6 +1131,8 @@ int dw_edma_probe(struct dw_edma_chip *chip)
 {
 	struct device *dev;
 	struct dw_edma *dw;
+	u16 hw_wr_ch_cnt;
+	u16 hw_rd_ch_cnt;
 	u32 wr_alloc = 0;
 	u32 rd_alloc = 0;
 	int i, err;
@@ -1139,6 +1144,10 @@ int dw_edma_probe(struct dw_edma_chip *chip)
 	if (!dev || !chip->ops)
 		return -EINVAL;
 
+	if ((chip->flags & DW_EDMA_CHIP_PARTIAL) &&
+	    chip->mf == EDMA_MF_EDMA_LEGACY)
+		return -EOPNOTSUPP;
+
 	dw = devm_kzalloc(dev, sizeof(*dw), GFP_KERNEL);
 	if (!dw)
 		return -ENOMEM;
@@ -1152,13 +1161,25 @@ int dw_edma_probe(struct dw_edma_chip *chip)
 
 	raw_spin_lock_init(&dw->lock);
 
-	dw->wr_ch_cnt = min_t(u16, chip->ll_wr_cnt,
-			      dw_edma_core_ch_count(dw, EDMA_DIR_WRITE));
-	dw->wr_ch_cnt = min_t(u16, dw->wr_ch_cnt, EDMA_MAX_WR_CH);
+	hw_wr_ch_cnt = min_t(u16, dw_edma_core_ch_count(dw, EDMA_DIR_WRITE),
+			     EDMA_MAX_WR_CH);
+	hw_rd_ch_cnt = min_t(u16, dw_edma_core_ch_count(dw, EDMA_DIR_READ),
+			     EDMA_MAX_RD_CH);
 
-	dw->rd_ch_cnt = min_t(u16, chip->ll_rd_cnt,
-			      dw_edma_core_ch_count(dw, EDMA_DIR_READ));
-	dw->rd_ch_cnt = min_t(u16, dw->rd_ch_cnt, EDMA_MAX_RD_CH);
+	if (chip->flags & DW_EDMA_CHIP_PARTIAL) {
+		/*
+		 * Direction-wide registers are shared by all channels in that
+		 * direction, so a direction must have a single owner.
+		 */
+		if ((chip->mf == EDMA_MF_EDMA_UNROLL ||
+		     chip->mf == EDMA_MF_HDMA_COMPAT) &&
+		    ((chip->ll_wr_cnt && chip->ll_wr_cnt != hw_wr_ch_cnt) ||
+		     (chip->ll_rd_cnt && chip->ll_rd_cnt != hw_rd_ch_cnt)))
+			return -EOPNOTSUPP;
+	}
+
+	dw->wr_ch_cnt = min_t(u16, chip->ll_wr_cnt, hw_wr_ch_cnt);
+	dw->rd_ch_cnt = min_t(u16, chip->ll_rd_cnt, hw_rd_ch_cnt);
 
 	if (!dw->wr_ch_cnt && !dw->rd_ch_cnt)
 		return -EINVAL;
@@ -1175,8 +1196,10 @@ int dw_edma_probe(struct dw_edma_chip *chip)
 	snprintf(dw->name, sizeof(dw->name), "dw-edma-core:%s",
 		 dev_name(chip->dev));
 
-	/* Disable eDMA, only to establish the ideal initial conditions */
-	dw_edma_core_off(dw);
+	if (!(chip->flags & DW_EDMA_CHIP_PARTIAL)) {
+		/* Disable eDMA only when this instance owns the controller. */
+		dw_edma_core_off(dw);
+	}
 
 	/* Request IRQs */
 	err = dw_edma_irq_request(dw, &wr_alloc, &rd_alloc);
@@ -1220,8 +1243,8 @@ int dw_edma_remove(struct dw_edma_chip *chip)
 	if (!dw)
 		return -ENODEV;
 
-	/* Disable eDMA */
-	dw_edma_core_off(dw);
+	if (!(chip->flags & DW_EDMA_CHIP_PARTIAL))
+		dw_edma_core_off(dw);
 
 	/* Free irqs */
 	for (i = (dw->nr_irqs - 1); i >= 0; i--)
diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h
index 9ea7b24b5015..33aa6c8981b3 100644
--- a/include/linux/dma/edma.h
+++ b/include/linux/dma/edma.h
@@ -55,9 +55,15 @@ enum dw_edma_map_format {
 /**
  * enum dw_edma_chip_flags - Flags specific to an eDMA chip
  * @DW_EDMA_CHIP_LOCAL:		eDMA is used locally by an endpoint
+ * @DW_EDMA_CHIP_PARTIAL:	Only channels described by this instance are
+ *				owned by this driver. Controller-wide state
+ *				must be preserved, and layouts with shared
+ *				direction-wide registers must only be shared at
+ *				direction granularity.
  */
 enum dw_edma_chip_flags {
 	DW_EDMA_CHIP_LOCAL	= BIT(0),
+	DW_EDMA_CHIP_PARTIAL	= BIT(1),
 };
 
 /**
-- 
2.51.0


  parent reply	other threads:[~2026-05-21  6:31 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-21  6:31 [PATCH 00/12] dmaengine: dw-edma: Prepare for PCI EP DMA (part 1/3) Koichiro Den
2026-05-21  6:31 ` [PATCH 01/12] dmaengine: Make dma_get_slave_channel() public Koichiro Den
2026-05-21  6:31 ` [PATCH 02/12] dmaengine: dw-edma: Add channel lookup helper Koichiro Den
2026-05-21 15:50   ` Frank Li
2026-05-21  6:31 ` [PATCH 03/12] dmaengine: dw-edma: Add per-channel interrupt routing control Koichiro Den
2026-05-21  6:31 ` Koichiro Den [this message]
2026-05-21  6:31 ` [PATCH 05/12] dmaengine: dw-edma-pcie: Add capability match data Koichiro Den
2026-05-21 16:06   ` Frank Li
2026-05-22 14:38     ` Koichiro Den
2026-05-22 20:54       ` Frank Li
2026-05-21  6:31 ` [PATCH 06/12] dmaengine: dw-edma-pcie: Rename DMA data copy Koichiro Den
2026-05-21 16:10   ` Frank Li
2026-05-22 14:41     ` Koichiro Den
2026-05-21  6:31 ` [PATCH 07/12] dmaengine: dw-edma-pcie: Add default IRQ match data Koichiro Den
2026-05-21 16:12   ` Frank Li
2026-05-21  6:31 ` [PATCH 08/12] dmaengine: dw-edma-pcie: Add raw slave address match flag Koichiro Den
2026-05-21 16:15   ` Frank Li
2026-05-22 14:45     ` Koichiro Den
2026-05-21  6:31 ` [PATCH 09/12] dmaengine: dw-edma-pcie: Add register offset " Koichiro Den
2026-05-21 16:17   ` Frank Li
2026-05-22 14:57     ` Koichiro Den
2026-05-22 20:51       ` Frank Li
2026-05-21  6:31 ` [PATCH 10/12] dmaengine: dw-edma-pcie: Factor descriptor block addresses Koichiro Den
2026-05-21 16:21   ` Frank Li
2026-05-21  6:31 ` [PATCH 11/12] dmaengine: dw-edma-pcie: Handle optional data blocks Koichiro Den
2026-05-21 16:25   ` Frank Li
2026-05-21  6:31 ` [PATCH 12/12] dmaengine: dw-edma-pcie: Add chip flags match data Koichiro Den
2026-05-21 16:26   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260521063115.2842238-5-den@valinux.co.jp \
    --to=den@valinux.co.jp \
    --cc=Frank.Li@kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=marek.vasut+renesas@mailbox.org \
    --cc=vkoul@kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®