From: "Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>
Cc: "Pascal Eberhard" <pascal.eberhard@se.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Tristram Ha" <tristram.ha@microchip.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bastien Curutchet (Schneider Electric)"
<bastien.curutchet@bootlin.com>
Subject: [PATCH net-next v2 05/10] net: dsa: microchip: remove setup_rgmii_delay() KSZ operation
Date: Mon, 08 Jun 2026 16:10:08 +0200 [thread overview]
Message-ID: <20260608-clean-ksz-3rd-v2-5-6e61b7be23c4@bootlin.com> (raw)
In-Reply-To: <20260608-clean-ksz-3rd-v2-0-6e61b7be23c4@bootlin.com>
setup_rgmii_delay() operation is only used once during the common phylink
MAC configuration. Only the lan937x switch implements this
setup_rgmii_delay().
Remove the setup_rgmii_delay operation from ksz_dev_ops.
Implement a lan937x-specific phylink MAC configuration that does this
RGMII delay setup.
Export ksz_set_xmii since it's needed by the lan937x implementation.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
drivers/net/dsa/microchip/ksz_common.c | 9 ++-------
drivers/net/dsa/microchip/ksz_common.h | 2 +-
drivers/net/dsa/microchip/lan937x_main.c | 17 +++++++++++++++--
3 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index f29287922843..33a20c2e0a8a 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -3127,8 +3127,7 @@ int ksz_set_mac_eee(struct dsa_switch *ds, int port,
return 0;
}
-static void ksz_set_xmii(struct ksz_device *dev, int port,
- phy_interface_t interface)
+void ksz_set_xmii(struct ksz_device *dev, int port, phy_interface_t interface)
{
const u8 *bitval = dev->info->xmii_ctrl1;
struct ksz_port *p = &dev->ports[port];
@@ -3242,12 +3241,8 @@ void ksz_phylink_mac_config(struct phylink_config *config,
struct ksz_device *dev = dp->ds->priv;
int port = dp->index;
- if (ksz_phylink_need_config(config, mode)) {
+ if (ksz_phylink_need_config(config, mode))
ksz_set_xmii(dev, port, state->interface);
-
- if (dev->dev_ops->setup_rgmii_delay)
- dev->dev_ops->setup_rgmii_delay(dev, port);
- }
}
bool ksz_get_gbit(struct ksz_device *dev, int port)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index c377bd3e5542..ef8eb10fde50 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -410,7 +410,6 @@ struct ksz_dev_ops {
u8 data);
void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
void (*port_init_cnt)(struct ksz_device *dev, int port);
- void (*setup_rgmii_delay)(struct ksz_device *dev, int port);
int (*tc_cbs_set_cinc)(struct ksz_device *dev, int port, u32 val);
int (*init)(struct ksz_device *dev);
};
@@ -468,6 +467,7 @@ void ksz_phylink_get_caps(struct dsa_switch *ds, int port,
void ksz_phylink_mac_disable_tx_lpi(struct phylink_config *config);
int ksz_phylink_mac_enable_tx_lpi(struct phylink_config *config,
u32 timer, bool tx_clock_stop);
+void ksz_set_xmii(struct ksz_device *dev, int port, phy_interface_t interface);
bool ksz_phylink_need_config(struct phylink_config *config, unsigned int mode);
void ksz_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index 57e289637193..69df378a40bf 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -643,6 +643,20 @@ static void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port)
}
}
+static void lan937x_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ksz_device *dev = dp->ds->priv;
+ int port = dp->index;
+
+ if (ksz_phylink_need_config(config, mode)) {
+ ksz_set_xmii(dev, port, state->interface);
+ lan937x_setup_rgmii_delay(dev, port);
+ }
+}
+
static int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val)
{
return ksz_pwrite32(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val);
@@ -821,7 +835,7 @@ static int lan937x_connect_tag_protocol(struct dsa_switch *ds,
}
const struct phylink_mac_ops lan937x_phylink_mac_ops = {
- .mac_config = ksz_phylink_mac_config,
+ .mac_config = lan937x_phylink_mac_config,
.mac_link_down = ksz_phylink_mac_link_down,
.mac_link_up = ksz9477_phylink_mac_link_up,
.mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi,
@@ -838,7 +852,6 @@ const struct ksz_dev_ops lan937x_dev_ops = {
.r_mib_stat64 = ksz_r_mib_stats64,
.freeze_mib = ksz9477_freeze_mib,
.port_init_cnt = ksz9477_port_init_cnt,
- .setup_rgmii_delay = lan937x_setup_rgmii_delay,
.tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc,
.init = lan937x_switch_init,
};
--
2.54.0
next prev parent reply other threads:[~2026-06-08 14:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-08 14:10 [PATCH net-next v2 00/10] net: dsa: microchip: remove unnecessary dsa_switch_ops callbacks Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 01/10] net: dsa: microchip: remove useless common cls_flower_{add/del} operations Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 02/10] net: dsa: microchip: remove VLAN operations for ksz8463 Bastien Curutchet
2026-06-08 14:10 ` [PATCH net-next v2 03/10] net: dsa: microchip: implement get_phy_flags only if needed Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 04/10] net: dsa: microchip: wrap the MAC configuration checks in a function Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` Bastien Curutchet (Schneider Electric) [this message]
2026-06-08 14:10 ` [PATCH net-next v2 06/10] net: dsa: microchip: implement .support_eee() only if needed Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 07/10] net: dsa: microchip: implement .{get/set}_wol " Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 08/10] net: dsa: microchip: implement port_hsr_join for KSZ9477 only Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 09/10] net: dsa: microchip: implement lan937x-specific MDIO registration Bastien Curutchet (Schneider Electric)
2026-06-11 10:54 ` Paolo Abeni
2026-06-12 9:18 ` Bastien Curutchet
2026-06-08 14:10 ` [PATCH net-next v2 10/10] net: dsa: microchip: implement port_teardown only if needed Bastien Curutchet (Schneider Electric)
2026-06-13 1:20 ` [PATCH net-next v2 00/10] net: dsa: microchip: remove unnecessary dsa_switch_ops callbacks patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260608-clean-ksz-3rd-v2-5-6e61b7be23c4@bootlin.com \
--to=bastien.curutchet@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pascal.eberhard@se.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tristram.ha@microchip.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®