From: "Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>
Cc: "Pascal Eberhard" <pascal.eberhard@se.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Tristram Ha" <tristram.ha@microchip.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bastien Curutchet (Schneider Electric)"
<bastien.curutchet@bootlin.com>
Subject: [PATCH net-next v2 08/10] net: dsa: microchip: implement port_hsr_join for KSZ9477 only
Date: Mon, 08 Jun 2026 16:10:11 +0200 [thread overview]
Message-ID: <20260608-clean-ksz-3rd-v2-8-6e61b7be23c4@bootlin.com> (raw)
In-Reply-To: <20260608-clean-ksz-3rd-v2-0-6e61b7be23c4@bootlin.com>
All switches implement the optional .port_hsr_join operation while only
the KSZ9477 truly supports it.
Remove the common port_hsr_join implementation.
Replace it with a specific implementation for the KSZ9477 case.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
drivers/net/dsa/microchip/ksz8.c | 6 ---
drivers/net/dsa/microchip/ksz9477.c | 65 +++++++++++++++++++++++++++++--
drivers/net/dsa/microchip/ksz9477.h | 2 -
drivers/net/dsa/microchip/ksz_common.c | 67 --------------------------------
drivers/net/dsa/microchip/ksz_common.h | 4 --
drivers/net/dsa/microchip/lan937x_main.c | 2 -
6 files changed, 61 insertions(+), 85 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c
index 690e1b275992..76b0f2ac8594 100644
--- a/drivers/net/dsa/microchip/ksz8.c
+++ b/drivers/net/dsa/microchip/ksz8.c
@@ -2448,8 +2448,6 @@ const struct dsa_switch_ops ksz8463_switch_ops = {
.get_sset_count = ksz_sset_count,
.port_bridge_join = ksz_port_bridge_join,
.port_bridge_leave = ksz_port_bridge_leave,
- .port_hsr_join = ksz_hsr_join,
- .port_hsr_leave = ksz_hsr_leave,
.port_set_mac_address = ksz_port_set_mac_address,
.port_stp_state_set = ksz_port_stp_state_set,
.port_teardown = ksz_port_teardown,
@@ -2498,8 +2496,6 @@ const struct dsa_switch_ops ksz87xx_switch_ops = {
.get_sset_count = ksz_sset_count,
.port_bridge_join = ksz_port_bridge_join,
.port_bridge_leave = ksz_port_bridge_leave,
- .port_hsr_join = ksz_hsr_join,
- .port_hsr_leave = ksz_hsr_leave,
.port_set_mac_address = ksz_port_set_mac_address,
.port_stp_state_set = ksz_port_stp_state_set,
.port_teardown = ksz_port_teardown,
@@ -2554,8 +2550,6 @@ const struct dsa_switch_ops ksz88xx_switch_ops = {
.get_sset_count = ksz_sset_count,
.port_bridge_join = ksz_port_bridge_join,
.port_bridge_leave = ksz_port_bridge_leave,
- .port_hsr_join = ksz_hsr_join,
- .port_hsr_leave = ksz_hsr_leave,
.port_set_mac_address = ksz_port_set_mac_address,
.port_stp_state_set = ksz_port_stp_state_set,
.port_teardown = ksz_port_teardown,
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index e0b3724a7558..48813b0f4280 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -12,6 +12,7 @@
#include <linux/platform_data/microchip-ksz.h>
#include <linux/phy.h>
#include <linux/if_bridge.h>
+#include <linux/if_hsr.h>
#include <linux/if_vlan.h>
#include <net/dsa.h>
#include <net/switchdev.h>
@@ -1707,12 +1708,52 @@ static int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val)
*/
#define KSZ9477_SUPPORTED_HSR_FEATURES (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_FWD)
-void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr)
+static int ksz9477_hsr_join(struct dsa_switch *ds, int port,
+ struct net_device *hsr,
+ struct netlink_ext_ack *extack)
{
struct ksz_device *dev = ds->priv;
struct net_device *user;
struct dsa_port *hsr_dp;
u8 data, hsr_ports = 0;
+ enum hsr_version ver;
+ int ret;
+
+ ret = hsr_get_version(hsr, &ver);
+ if (ret)
+ return ret;
+
+ if (dev->chip_id != KSZ9477_CHIP_ID) {
+ NL_SET_ERR_MSG_MOD(extack, "Chip does not support HSR offload");
+ return -EOPNOTSUPP;
+ }
+
+ /* KSZ9477 can support HW offloading of only 1 HSR device */
+ if (dev->hsr_dev && hsr != dev->hsr_dev) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Offload supported for a single HSR");
+ return -EOPNOTSUPP;
+ }
+
+ /* KSZ9477 only supports HSR v0 and v1 */
+ if (!(ver == HSR_V0 || ver == HSR_V1)) {
+ NL_SET_ERR_MSG_MOD(extack, "Only HSR v0 and v1 supported");
+ return -EOPNOTSUPP;
+ }
+
+ /* KSZ9477 can only perform HSR offloading for up to two ports */
+ if (hweight8(dev->hsr_ports) >= 2) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Cannot offload more than two ports - using software HSR");
+ return -EOPNOTSUPP;
+ }
+
+ /* Self MAC address filtering, to avoid frames traversing
+ * the HSR ring more than once.
+ */
+ ret = ksz_switch_macaddr_get(ds, port, extack);
+ if (ret)
+ return ret;
/* Program which port(s) shall support HSR */
ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), BIT(port));
@@ -1744,12 +1785,20 @@ void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr)
/* Setup HW supported features for lan HSR ports */
user = dsa_to_port(ds, port)->user;
user->features |= KSZ9477_SUPPORTED_HSR_FEATURES;
+
+ dev->hsr_dev = hsr;
+ dev->hsr_ports |= BIT(port);
+
+ return 0;
}
-void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr)
+static int ksz9477_hsr_leave(struct dsa_switch *ds, int port,
+ struct net_device *hsr)
{
struct ksz_device *dev = ds->priv;
+ WARN_ON(dev->chip_id != KSZ9477_CHIP_ID);
+
/* Clear port HSR support */
ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), 0);
@@ -1758,6 +1807,14 @@ void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr)
/* Disable per port self-address filtering */
ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, false);
+
+ dev->hsr_ports &= ~BIT(port);
+ if (!dev->hsr_ports)
+ dev->hsr_dev = NULL;
+
+ ksz_switch_macaddr_put(ds);
+
+ return 0;
}
static int ksz9477_switch_init(struct ksz_device *dev)
@@ -2012,8 +2069,8 @@ const struct dsa_switch_ops ksz9477_switch_ops = {
.get_sset_count = ksz_sset_count,
.port_bridge_join = ksz_port_bridge_join,
.port_bridge_leave = ksz_port_bridge_leave,
- .port_hsr_join = ksz_hsr_join,
- .port_hsr_leave = ksz_hsr_leave,
+ .port_hsr_join = ksz9477_hsr_join,
+ .port_hsr_leave = ksz9477_hsr_leave,
.port_set_mac_address = ksz_port_set_mac_address,
.port_stp_state_set = ksz_port_stp_state_set,
.port_teardown = ksz_port_teardown,
diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h
index 599db0a6ba2e..92a1d889224d 100644
--- a/drivers/net/dsa/microchip/ksz9477.h
+++ b/drivers/net/dsa/microchip/ksz9477.h
@@ -45,8 +45,6 @@ int ksz9477_mdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
int ksz9477_enable_stp_addr(struct ksz_device *dev);
void ksz9477_port_queue_split(struct ksz_device *dev, int port);
-void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr);
-void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr);
int ksz9477_port_acl_init(struct ksz_device *dev, int port);
void ksz9477_port_acl_free(struct ksz_device *dev, int port);
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 809a0bc3c01e..7dc8e4ffacdd 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -16,7 +16,6 @@
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
#include <linux/if_vlan.h>
-#include <linux/if_hsr.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
@@ -4055,72 +4054,6 @@ void ksz_switch_macaddr_put(struct dsa_switch *ds)
kfree(switch_macaddr);
}
-int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr,
- struct netlink_ext_ack *extack)
-{
- struct ksz_device *dev = ds->priv;
- enum hsr_version ver;
- int ret;
-
- ret = hsr_get_version(hsr, &ver);
- if (ret)
- return ret;
-
- if (dev->chip_id != KSZ9477_CHIP_ID) {
- NL_SET_ERR_MSG_MOD(extack, "Chip does not support HSR offload");
- return -EOPNOTSUPP;
- }
-
- /* KSZ9477 can support HW offloading of only 1 HSR device */
- if (dev->hsr_dev && hsr != dev->hsr_dev) {
- NL_SET_ERR_MSG_MOD(extack, "Offload supported for a single HSR");
- return -EOPNOTSUPP;
- }
-
- /* KSZ9477 only supports HSR v0 and v1 */
- if (!(ver == HSR_V0 || ver == HSR_V1)) {
- NL_SET_ERR_MSG_MOD(extack, "Only HSR v0 and v1 supported");
- return -EOPNOTSUPP;
- }
-
- /* KSZ9477 can only perform HSR offloading for up to two ports */
- if (hweight8(dev->hsr_ports) >= 2) {
- NL_SET_ERR_MSG_MOD(extack,
- "Cannot offload more than two ports - using software HSR");
- return -EOPNOTSUPP;
- }
-
- /* Self MAC address filtering, to avoid frames traversing
- * the HSR ring more than once.
- */
- ret = ksz_switch_macaddr_get(ds, port, extack);
- if (ret)
- return ret;
-
- ksz9477_hsr_join(ds, port, hsr);
- dev->hsr_dev = hsr;
- dev->hsr_ports |= BIT(port);
-
- return 0;
-}
-
-int ksz_hsr_leave(struct dsa_switch *ds, int port,
- struct net_device *hsr)
-{
- struct ksz_device *dev = ds->priv;
-
- WARN_ON(dev->chip_id != KSZ9477_CHIP_ID);
-
- ksz9477_hsr_leave(ds, port, hsr);
- dev->hsr_ports &= ~BIT(port);
- if (!dev->hsr_ports)
- dev->hsr_dev = NULL;
-
- ksz_switch_macaddr_put(ds);
-
- return 0;
-}
-
int ksz_suspend(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 17b7ba77aaa9..2c118eaddd75 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -490,10 +490,6 @@ int ksz_set_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol);
int ksz_port_set_mac_address(struct dsa_switch *ds, int port,
const unsigned char *addr);
-int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr,
- struct netlink_ext_ack *extack);
-int ksz_hsr_leave(struct dsa_switch *ds, int port,
- struct net_device *hsr);
int ksz_suspend(struct dsa_switch *ds);
int ksz_resume(struct dsa_switch *ds);
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index 6b1306e81558..d45798de4ce9 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -871,8 +871,6 @@ const struct dsa_switch_ops lan937x_switch_ops = {
.get_sset_count = ksz_sset_count,
.port_bridge_join = ksz_port_bridge_join,
.port_bridge_leave = ksz_port_bridge_leave,
- .port_hsr_join = ksz_hsr_join,
- .port_hsr_leave = ksz_hsr_leave,
.port_set_mac_address = ksz_port_set_mac_address,
.port_stp_state_set = ksz_port_stp_state_set,
.port_teardown = ksz_port_teardown,
--
2.54.0
next prev parent reply other threads:[~2026-06-08 14:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-08 14:10 [PATCH net-next v2 00/10] net: dsa: microchip: remove unnecessary dsa_switch_ops callbacks Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 01/10] net: dsa: microchip: remove useless common cls_flower_{add/del} operations Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 02/10] net: dsa: microchip: remove VLAN operations for ksz8463 Bastien Curutchet
2026-06-08 14:10 ` [PATCH net-next v2 03/10] net: dsa: microchip: implement get_phy_flags only if needed Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 04/10] net: dsa: microchip: wrap the MAC configuration checks in a function Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 05/10] net: dsa: microchip: remove setup_rgmii_delay() KSZ operation Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 06/10] net: dsa: microchip: implement .support_eee() only if needed Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 07/10] net: dsa: microchip: implement .{get/set}_wol " Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` Bastien Curutchet (Schneider Electric) [this message]
2026-06-08 14:10 ` [PATCH net-next v2 09/10] net: dsa: microchip: implement lan937x-specific MDIO registration Bastien Curutchet (Schneider Electric)
2026-06-11 10:54 ` Paolo Abeni
2026-06-12 9:18 ` Bastien Curutchet
2026-06-08 14:10 ` [PATCH net-next v2 10/10] net: dsa: microchip: implement port_teardown only if needed Bastien Curutchet (Schneider Electric)
2026-06-13 1:20 ` [PATCH net-next v2 00/10] net: dsa: microchip: remove unnecessary dsa_switch_ops callbacks patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260608-clean-ksz-3rd-v2-8-6e61b7be23c4@bootlin.com \
--to=bastien.curutchet@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pascal.eberhard@se.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tristram.ha@microchip.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®