From: "Bastien Curutchet (Schneider Electric)" <bastien.curutchet@bootlin.com>
To: Woojung Huh <woojung.huh@microchip.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Russell King <linux@armlinux.org.uk>
Cc: "Pascal Eberhard" <pascal.eberhard@se.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Tristram Ha" <tristram.ha@microchip.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bastien Curutchet (Schneider Electric)"
<bastien.curutchet@bootlin.com>
Subject: [PATCH net-next v2 07/10] net: dsa: microchip: implement .{get/set}_wol only if needed
Date: Mon, 08 Jun 2026 16:10:10 +0200 [thread overview]
Message-ID: <20260608-clean-ksz-3rd-v2-7-6e61b7be23c4@bootlin.com> (raw)
In-Reply-To: <20260608-clean-ksz-3rd-v2-0-6e61b7be23c4@bootlin.com>
All the KSZ switches use common {get/set}_wol operations while only the
ksz9477 and the ksz87xx families really support it. These operations are
optional so there is no point implementing them to return -EOPNOTSUPP.
Remove the {get/set}_wol callbacks from the switch operations for the
ksz88xx, the ksz8463 and the lan937x families.
Remove the family check from the common {get/set}_wol implementation.
Note that is_ksz9477() is only true for the KSZ9477 so this change will
also add WoL support for the other switches using the
ksz9477_switch_ops. I checked their datasheet, they implement the same
PME_WOL registers, at the same addresses, so this should go fine.
Modify the ksz_wol_pre_shutdown() initial check to ensure consistency in
the WoL handling for these non-KSZ9477 switches using ksz9477_switch_ops.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
drivers/net/dsa/microchip/ksz8.c | 4 ----
drivers/net/dsa/microchip/ksz_common.c | 12 ++++--------
drivers/net/dsa/microchip/lan937x_main.c | 2 --
3 files changed, 4 insertions(+), 14 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c
index 7b4b46db1ef6..690e1b275992 100644
--- a/drivers/net/dsa/microchip/ksz8.c
+++ b/drivers/net/dsa/microchip/ksz8.c
@@ -2467,8 +2467,6 @@ const struct dsa_switch_ops ksz8463_switch_ops = {
.get_pause_stats = ksz_get_pause_stats,
.port_change_mtu = ksz8_change_mtu,
.port_max_mtu = ksz_max_mtu,
- .get_wol = ksz_get_wol,
- .set_wol = ksz_set_wol,
.suspend = ksz_suspend,
.resume = ksz_resume,
.get_ts_info = ksz_get_ts_info,
@@ -2578,8 +2576,6 @@ const struct dsa_switch_ops ksz88xx_switch_ops = {
.get_pause_stats = ksz_get_pause_stats,
.port_change_mtu = ksz8_change_mtu,
.port_max_mtu = ksz_max_mtu,
- .get_wol = ksz_get_wol,
- .set_wol = ksz_set_wol,
.suspend = ksz_suspend,
.resume = ksz_resume,
.get_ts_info = ksz_get_ts_info,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index bebf697ec60a..809a0bc3c01e 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -3756,9 +3756,6 @@ void ksz_get_wol(struct dsa_switch *ds, int port,
u8 pme_ctrl;
int ret;
- if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev))
- return;
-
if (!dev->wakeup_source)
return;
@@ -3809,9 +3806,6 @@ int ksz_set_wol(struct dsa_switch *ds, int port,
if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
return -EINVAL;
- if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev))
- return -EOPNOTSUPP;
-
if (!dev->wakeup_source)
return -EOPNOTSUPP;
@@ -3871,12 +3865,13 @@ static void ksz_wol_pre_shutdown(struct ksz_device *dev)
{
const struct ksz_dev_ops *ops = dev->dev_ops;
const u16 *regs = dev->info->regs;
+ struct dsa_switch *ds = dev->ds;
u8 pme_pin_en = PME_ENABLE;
bool wol_enabled = false;
struct dsa_port *dp;
int ret;
- if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev))
+ if (!ds->ops->set_wol)
return;
if (!dev->wakeup_source)
@@ -3924,7 +3919,8 @@ int ksz_port_set_mac_address(struct dsa_switch *ds, int port,
*/
wol.wolopts = 0;
- ksz_get_wol(ds, dp->index, &wol);
+ if (ds->ops->get_wol)
+ ds->ops->get_wol(ds, dp->index, &wol);
if (wol.wolopts & WAKE_MAGIC) {
dev_err(ds->dev,
"Cannot change MAC address on port %d with active Wake on Magic Packet\n",
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index e1aba93d1438..6b1306e81558 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -893,8 +893,6 @@ const struct dsa_switch_ops lan937x_switch_ops = {
.get_pause_stats = ksz_get_pause_stats,
.port_change_mtu = lan937x_change_mtu,
.port_max_mtu = ksz_max_mtu,
- .get_wol = ksz_get_wol,
- .set_wol = ksz_set_wol,
.suspend = ksz_suspend,
.resume = ksz_resume,
.get_ts_info = ksz_get_ts_info,
--
2.54.0
next prev parent reply other threads:[~2026-06-08 14:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-08 14:10 [PATCH net-next v2 00/10] net: dsa: microchip: remove unnecessary dsa_switch_ops callbacks Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 01/10] net: dsa: microchip: remove useless common cls_flower_{add/del} operations Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 02/10] net: dsa: microchip: remove VLAN operations for ksz8463 Bastien Curutchet
2026-06-08 14:10 ` [PATCH net-next v2 03/10] net: dsa: microchip: implement get_phy_flags only if needed Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 04/10] net: dsa: microchip: wrap the MAC configuration checks in a function Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 05/10] net: dsa: microchip: remove setup_rgmii_delay() KSZ operation Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 06/10] net: dsa: microchip: implement .support_eee() only if needed Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` Bastien Curutchet (Schneider Electric) [this message]
2026-06-08 14:10 ` [PATCH net-next v2 08/10] net: dsa: microchip: implement port_hsr_join for KSZ9477 only Bastien Curutchet (Schneider Electric)
2026-06-08 14:10 ` [PATCH net-next v2 09/10] net: dsa: microchip: implement lan937x-specific MDIO registration Bastien Curutchet (Schneider Electric)
2026-06-11 10:54 ` Paolo Abeni
2026-06-12 9:18 ` Bastien Curutchet
2026-06-08 14:10 ` [PATCH net-next v2 10/10] net: dsa: microchip: implement port_teardown only if needed Bastien Curutchet (Schneider Electric)
2026-06-13 1:20 ` [PATCH net-next v2 00/10] net: dsa: microchip: remove unnecessary dsa_switch_ops callbacks patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260608-clean-ksz-3rd-v2-7-6e61b7be23c4@bootlin.com \
--to=bastien.curutchet@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=miquel.raynal@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=pascal.eberhard@se.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tristram.ha@microchip.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®