[PATCH v2 22/37] arm64: dts: qcom: qcs8550: Move PCIe GPIOs to root port node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The perst/wake GPIO properties are per root port and belong in the
root port node, not in the RC controller node. Move perst-gpios/
wake-gpios from the &pcie0/&pcie1 controller overrides to the
respective &pcieport0/&pcie1_port0 nodes, renaming perst-gpios to
reset-gpios to match the binding used in the root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chaitanya.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
index 5eb4626c6129..579b0a4f34eb 100644
--- a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi
@@ -335,26 +335,30 @@ &mdss_dsi0_phy {
 };
 
 &pcie0 {
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 };
 
+&pcieport0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
 };
 
 &pcie1 {
-	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie1_default_state>;
 	pinctrl-names = "default";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l3c_0p9>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;

-- 
2.34.1