[PATCH v2 33/37] arm64: dts: qcom: sm8550: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys and phy-names from the controller to
the existing pcieport0 and newly labeled pcie1_port0, allowing
board-level overrides. Move perst-gpios/wake-gpios from the
controller overrides to the respective port nodes in the board files,
renaming perst-gpios to reset-gpios to match the binding used in the
root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chaitanya.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts                  | 14 ++++++++------
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts                  | 16 ++++++++++------
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts                  |  6 +++---
 arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts          |  7 +++++--
 .../boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts     |  8 +++++---
 arch/arm64/boot/dts/qcom/sm8550.dtsi                     | 12 +++++-------
 6 files changed, 36 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 4709eb34521d..1488ff8b7bed 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -1003,9 +1003,6 @@ &mdss_dp0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
@@ -1013,6 +1010,9 @@ &pcie0 {
 };
 
 &pcieport0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+
 	wifi@0 {
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
@@ -1037,15 +1037,17 @@ &pcie0_phy {
 };
 
 &pcie1 {
-	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie1_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l3c_0p9>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 7703ebfc1b67..e44f6a8877bd 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -739,15 +739,17 @@ &mdss_dp0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_state>;
 
 	status = "okay";
 };
 
+&pcieport0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
@@ -756,15 +758,17 @@ &pcie0_phy {
 };
 
 &pcie1 {
-	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;
 
 	status = "okay";
 };
 
+&pcie1_port0 {
+	reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+};
+
 &pcie1_phy {
 	vdda-phy-supply = <&vreg_l3c_0p91>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 5ce81ac3ab4c..1fe6a8bf0fbc 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -903,9 +903,6 @@ &mdss_dp0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
@@ -913,6 +910,9 @@ &pcie0 {
 };
 
 &pcieport0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+
 	wifi@0 {
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index cf4e4e9d9e26..0ff9f3850b0c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -510,13 +510,16 @@ &i2c_master_hub_0 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 	status = "okay";
 };
 
+&pcieport0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&vreg_l1e_0p88>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
index d23fe714bd27..678e58694b8a 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts
@@ -584,15 +584,17 @@ cirrus,gpio-ctrl2 {
 };
 
 &pcie0 {
-	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
-	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcieport0 {
+	reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+};
+
 &pcie0_phy {
 	vdda-phy-supply = <&pm8550vs_2_l1>;
 	vdda-pll-supply = <&pm8550vs_2_l3>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 912525e9bca6..a8eccaebcf2d 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2033,9 +2033,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
-
 			operating-points-v2 = <&pcie0_opp_table>;
 
 			status = "disabled";
@@ -2100,6 +2097,8 @@ pcieport0: pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+
+				phys = <&pcie0_phy>;
 			};
 		};
 
@@ -2213,9 +2212,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
 			operating-points-v2 = <&pcie1_opp_table>;
 
 			status = "disabled";
@@ -2288,7 +2284,7 @@ opp-32000000-4 {
 				};
 			};
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -2296,6 +2292,8 @@ pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+
+				phys = <&pcie1_phy>;
 			};
 		};
 

-- 
2.34.1