[PATCH v2 34/37] arm64: dts: qcom: talos: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys from the controller to pcie_port0, and
move perst-gpios/wake-gpios from the &pcie controller overrides to the
&pcie_port0 node in the board files, renaming perst-gpios to reset-gpios
to match the binding used in the root port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chaitanya.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts    | 8 +++++---
 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi | 8 +++++---
 arch/arm64/boot/dts/qcom/talos.dtsi         | 5 ++---
 3 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index d89548a2a3f1..94a6849566f8 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -444,15 +444,17 @@ &mdss_dsi0_phy {
 };
 
 &pcie {
-	perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+};
+
 &pcie_phy {
 	vdda-phy-supply = <&vreg_l5a>;
 	vdda-pll-supply = <&vreg_l12a>;
diff --git a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
index 6eca3791e2b9..619880b0ddc6 100644
--- a/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
@@ -358,15 +358,17 @@ &mdss_dsi0_phy {
 };
 
 &pcie {
-	perst-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
-
 	pinctrl-0 = <&pcie_default_state>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
+&pcie_port0 {
+	reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+};
+
 &pcie_phy {
 	vdda-phy-supply = <&vreg_l5a>;
 	vdda-pll-supply = <&vreg_l12a>;
diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index ff5afbfce2a4..6f5f468ca4d6 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -1337,9 +1337,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie_phy>;
-			phy-names = "pciephy";
-
 			max-link-speed = <2>;
 
 			operating-points-v2 = <&pcie_opp_table>;
@@ -1371,6 +1368,8 @@ pcie_port0: pcie@0 {
 				#size-cells = <2>;
 				ranges;
 				bus-range = <0x01 0xff>;
+
+				phys = <&pcie_phy>;
 			};
 		};
 

-- 
2.34.1