* [PATCH v2 0/2] drm/panel: add support for Ilitek ILI7807S DSI panels
@ 2026-06-18 10:24 Arpit Saini
2026-06-18 10:24 ` [PATCH v2 1/2] dt-bindings: display: panel: add Ilitek ILI7807S panel controller Arpit Saini
2026-06-18 10:24 ` [PATCH v2 2/2] drm/panel: add Ilitek ILI7807S panel driver Arpit Saini
0 siblings, 2 replies; 5+ messages in thread
From: Arpit Saini @ 2026-06-18 10:24 UTC (permalink / raw)
To: Neil Armstrong, Jessica Zhang, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: arpit.saini, linux-arm-msm, dri-devel, devicetree, linux-kernel,
ayushi.makhija, rajeevny
Add DT bindings and a DRM panel driver for panels based on the Ilitek
ILI7807S display controller. The first supported panel is the DLC
DLC0697 1080x1920@60Hz MIPI DSI panel.
Changes in v2:
- Drop MAINTAINERS entry (Dmitry Baryshkov)
- Use devm_drm_panel_add() instead of drm_panel_add() to avoid
manual drm_panel_remove() in the error path (Dmitry Baryshkov)
- Rework backlight: call drm_panel_of_backlight() first and fall back
to creating a DCS backlight device if panel->backlight is still NULL
(Dmitry Baryshkov)
- Remove backlight-en-gpios from the binding (Dmitry Baryshkov)
- Fix mode_flags LPM not restored on backlight update error path
- Link to v1 : https://lore.kernel.org/all/20260518-ili7807s-panel-v1-0-d7b048163b1c@oss.qualcomm.com/
---
Arpit Saini (2):
dt-bindings: display: panel: add Ilitek ILI7807S panel controller
drm/panel: add Ilitek ILI7807S panel driver
.../bindings/display/panel/ilitek,ili7807s.yaml | 71 +++++
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili7807s.c | 297 +++++++++++++++++++++
4 files changed, 381 insertions(+)
---
base-commit: abe651837cb394f76d738a7a747322fca3bf17ba
change-id: 20260615-ili7807s-panel
Best regards,
--
Arpit Saini <arpit.saini@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v2 1/2] dt-bindings: display: panel: add Ilitek ILI7807S panel controller 2026-06-18 10:24 [PATCH v2 0/2] drm/panel: add support for Ilitek ILI7807S DSI panels Arpit Saini @ 2026-06-18 10:24 ` Arpit Saini 2026-06-22 11:04 ` Krzysztof Kozlowski 2026-06-18 10:24 ` [PATCH v2 2/2] drm/panel: add Ilitek ILI7807S panel driver Arpit Saini 1 sibling, 1 reply; 5+ messages in thread From: Arpit Saini @ 2026-06-18 10:24 UTC (permalink / raw) To: Neil Armstrong, Jessica Zhang, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: arpit.saini, linux-arm-msm, dri-devel, devicetree, linux-kernel, ayushi.makhija, rajeevny ILI7807S is a DSI display controller used to drive MIPI-DSI panels. The DLC DLC0697 1080x1920 LCD panel is based on this controller. The panel requires a reset GPIO, I/O voltage supply (vddi), positive LCD bias supply (avdd) and negative LCD bias supply (avee). The panel operates in video burst mode with four data lanes using RGB888 pixel format. Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com> --- .../bindings/display/panel/ilitek,ili7807s.yaml | 71 ++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili7807s.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili7807s.yaml new file mode 100644 index 000000000000..ba8c5bbf8ffc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili7807s.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili7807s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI7807S-based DSI panels + +maintainers: + - Arpit Saini <arpit.saini@oss.qualcomm.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - dlc,dlc0697 + - const: ilitek,ili7807s + + reg: + maxItems: 1 + description: DSI virtual channel + + vddi-supply: + description: I/O voltage supply (1.8V) + + avdd-supply: + description: Positive LCD bias supply (AVDD), typically +5.5V + (range 4.5V to 6.3V) + + avee-supply: + description: Negative LCD bias supply (AVEE), typically -5.5V + (range -6.3V to -4.5V) + +required: + - compatible + - reg + - reset-gpios + - vddi-supply + - avdd-supply + - avee-supply + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "dlc,dlc0697", "ilitek,ili7807s"; + reg = <0>; + + reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + vddi-supply = <&pm4125_l15>; + avdd-supply = <&avdd>; + avee-supply = <&avee>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; -- 2.34.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: display: panel: add Ilitek ILI7807S panel controller 2026-06-18 10:24 ` [PATCH v2 1/2] dt-bindings: display: panel: add Ilitek ILI7807S panel controller Arpit Saini @ 2026-06-22 11:04 ` Krzysztof Kozlowski 0 siblings, 0 replies; 5+ messages in thread From: Krzysztof Kozlowski @ 2026-06-22 11:04 UTC (permalink / raw) To: Arpit Saini Cc: Neil Armstrong, Jessica Zhang, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm, dri-devel, devicetree, linux-kernel, ayushi.makhija, rajeevny On Thu, Jun 18, 2026 at 03:54:02PM +0530, Arpit Saini wrote: > ILI7807S is a DSI display controller used to drive MIPI-DSI panels. > The DLC DLC0697 1080x1920 LCD panel is based on this controller. > > The panel requires a reset GPIO, I/O voltage supply (vddi), positive > LCD bias supply (avdd) and negative LCD bias supply (avee). The panel > operates in video burst mode with four data lanes using RGB888 pixel > format. > > Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com> > --- > .../bindings/display/panel/ilitek,ili7807s.yaml | 71 ++++++++++++++++++++++ > 1 file changed, 71 insertions(+) Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] drm/panel: add Ilitek ILI7807S panel driver 2026-06-18 10:24 [PATCH v2 0/2] drm/panel: add support for Ilitek ILI7807S DSI panels Arpit Saini 2026-06-18 10:24 ` [PATCH v2 1/2] dt-bindings: display: panel: add Ilitek ILI7807S panel controller Arpit Saini @ 2026-06-18 10:24 ` Arpit Saini 2026-06-18 12:43 ` Neil Armstrong 1 sibling, 1 reply; 5+ messages in thread From: Arpit Saini @ 2026-06-18 10:24 UTC (permalink / raw) To: Neil Armstrong, Jessica Zhang, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: arpit.saini, linux-arm-msm, dri-devel, devicetree, linux-kernel, ayushi.makhija, rajeevny Add a DRM panel driver for the DLC DLC0697 1080x1920@60Hz MIPI DSI panel based on the Ilitek ILI7807S display controller. The panel operates in video burst mode with four data lanes using RGB888 pixel format. Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com> --- drivers/gpu/drm/panel/Kconfig | 12 ++ drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-ilitek-ili7807s.c | 297 ++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 7450b27622a2..1cbaac1bf545 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -264,6 +264,18 @@ config DRM_PANEL_HYDIS_HV101HD1 If M is selected the module will be called panel-hydis-hv101hd1 +config DRM_PANEL_ILITEK_ILI7807S + tristate "Ilitek ILI7807S-based panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Ilitek ILI7807S display controller, such as the DLC DLC0697 + 1080x1920 MIPI DSI panel. + + If M is selected the module will be called panel-ilitek-ili7807s. + config DRM_PANEL_ILITEK_IL9322 tristate "Ilitek ILI9322 320x240 QVGA panels" depends on OF && SPI diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index c2c5cf817116..c3002b351cb8 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_DRM_PANEL_HIMAX_HX83112B) += panel-himax-hx83112b.o obj-$(CONFIG_DRM_PANEL_HIMAX_HX83121A) += panel-himax-hx83121a.o obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o obj-$(CONFIG_DRM_PANEL_HYDIS_HV101HD1) += panel-hydis-hv101hd1.o +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI7807S) += panel-ilitek-ili7807s.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9805) += panel-ilitek-ili9805.o diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c b/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c new file mode 100644 index 000000000000..bfbb8e29a4aa --- /dev/null +++ b/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_probe_helper.h> + +struct panel_desc { + const struct drm_display_mode *mode; + unsigned int lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; + void (*init)(struct mipi_dsi_multi_context *dsi_ctx); +}; + +struct ili7807s { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + const struct panel_desc *desc; + + struct regulator_bulk_data *supplies; + struct gpio_desc *reset_gpio; +}; + +static const struct regulator_bulk_data ili7807s_supplies[] = { + { .supply = "vddi" }, + { .supply = "avdd" }, + { .supply = "avee" }, +}; + +static inline struct ili7807s *to_ili7807s(struct drm_panel *panel) +{ + return container_of(panel, struct ili7807s, panel); +} + +static void ili7807s_reset(struct ili7807s *ctx) +{ + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(10000, 11000); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(10000, 11000); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + usleep_range(10000, 11000); +} + +static void dlc0697_init_sequence(struct mipi_dsi_multi_context *dsi_ctx) +{ + mipi_dsi_dcs_soft_reset_multi(dsi_ctx); + mipi_dsi_msleep(dsi_ctx, 120); + + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x78, 0x07, 0x00); + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x35, 0x00); + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x5e, 0x09, 0x99); + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x53, 0x24); + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x55, 0x01); + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x51, 0x3f, 0xff); + + mipi_dsi_dcs_exit_sleep_mode_multi(dsi_ctx); + mipi_dsi_msleep(dsi_ctx, 120); + + mipi_dsi_dcs_set_display_on_multi(dsi_ctx); + mipi_dsi_msleep(dsi_ctx, 20); +} + +static int ili7807s_on(struct ili7807s *ctx) +{ + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; + + ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + ctx->desc->init(&dsi_ctx); + + ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + return dsi_ctx.accum_err; +} + +static int ili7807s_off(struct ili7807s *ctx) +{ + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; + + ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + mipi_dsi_dcs_set_display_off_multi(&dsi_ctx); + mipi_dsi_msleep(&dsi_ctx, 20); + + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); + mipi_dsi_msleep(&dsi_ctx, 120); + + ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + return dsi_ctx.accum_err; +} + +static int ili7807s_prepare(struct drm_panel *panel) +{ + struct ili7807s *ctx = to_ili7807s(panel); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies); + if (ret < 0) { + dev_err(ctx->panel.dev, "failed to enable regulators: %d\n", ret); + return ret; + } + + msleep(20); + + ili7807s_reset(ctx); + + ret = ili7807s_on(ctx); + if (ret < 0) { + dev_err(ctx->panel.dev, "failed to initialise panel: %d\n", ret); + goto err; + } + + return 0; + +err: + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + regulator_bulk_disable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies); + return ret; +} + +static int ili7807s_unprepare(struct drm_panel *panel) +{ + struct ili7807s *ctx = to_ili7807s(panel); + int ret; + + ret = ili7807s_off(ctx); + if (ret < 0) + dev_err(ctx->panel.dev, "failed to disable panel: %d\n", ret); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + regulator_bulk_disable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies); + + return 0; +} + +static int ili7807s_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct ili7807s *ctx = to_ili7807s(panel); + + return drm_connector_helper_get_modes_fixed(connector, ctx->desc->mode); +} + +static const struct drm_panel_funcs ili7807s_panel_funcs = { + .prepare = ili7807s_prepare, + .unprepare = ili7807s_unprepare, + .get_modes = ili7807s_get_modes, +}; + +static int ili7807s_bl_update_status(struct backlight_device *bl) +{ + struct mipi_dsi_device *dsi = bl_get_data(bl); + u16 brightness = backlight_get_brightness(bl); + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + return ret; +} + +static const struct backlight_ops ili7807s_bl_ops = { + .update_status = ili7807s_bl_update_status, +}; + +static struct backlight_device *ili7807s_create_backlight(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + const struct backlight_properties props = { + .type = BACKLIGHT_RAW, + .brightness = 0x3fff, + .max_brightness = 0x3fff, + }; + + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, + &ili7807s_bl_ops, &props); +} + +static const struct drm_display_mode dlc0697_mode = { + .clock = 131911, + + .hdisplay = 1080, + .hsync_start = 1080 + 18, + .hsync_end = 1080 + 18 + 2, + .htotal = 1080 + 18 + 2 + 16, + + .vdisplay = 1920, + .vsync_start = 1920 + 26, + .vsync_end = 1920 + 26 + 4, + .vtotal = 1920 + 26 + 4 + 20, + + .width_mm = 0, + .height_mm = 0, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc dlc0697_desc = { + .mode = &dlc0697_mode, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST, + .init = dlc0697_init_sequence, +}; + +static int ili7807s_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + const struct panel_desc *desc; + struct ili7807s *ctx; + int ret; + + ctx = devm_drm_panel_alloc(dev, struct ili7807s, panel, + &ili7807s_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + if (IS_ERR(ctx)) + return PTR_ERR(ctx); + + desc = of_device_get_match_data(dev); + ctx->desc = desc; + + ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(ili7807s_supplies), + ili7807s_supplies, &ctx->supplies); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), + "failed to get reset gpio\n"); + + ctx->dsi = dsi; + mipi_dsi_set_drvdata(dsi, ctx); + + dsi->lanes = desc->lanes; + dsi->format = desc->format; + dsi->mode_flags = desc->mode_flags; + + ctx->panel.prepare_prev_first = true; + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + if (!ctx->panel.backlight) { + ctx->panel.backlight = ili7807s_create_backlight(dsi); + if (IS_ERR(ctx->panel.backlight)) + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), + "failed to create backlight\n"); + } + + ret = devm_drm_panel_add(dev, &ctx->panel); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to add panel\n"); + + ret = devm_mipi_dsi_attach(dev, dsi); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to attach dsi\n"); + + return 0; +} + +static const struct of_device_id ili7807s_of_match[] = { + { .compatible = "dlc,dlc0697", .data = &dlc0697_desc }, + { } +}; +MODULE_DEVICE_TABLE(of, ili7807s_of_match); + +static struct mipi_dsi_driver ili7807s_dsi_driver = { + .probe = ili7807s_probe, + .driver = { + .name = "panel-ilitek-ili7807s", + .of_match_table = ili7807s_of_match, + }, +}; +module_mipi_dsi_driver(ili7807s_dsi_driver); + +MODULE_AUTHOR("Arpit Saini <arpit.saini@oss.qualcomm.com>"); +MODULE_DESCRIPTION("Panel driver for Ilitek ILI7807S LCD DSI panel"); +MODULE_LICENSE("GPL"); -- 2.34.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] drm/panel: add Ilitek ILI7807S panel driver 2026-06-18 10:24 ` [PATCH v2 2/2] drm/panel: add Ilitek ILI7807S panel driver Arpit Saini @ 2026-06-18 12:43 ` Neil Armstrong 0 siblings, 0 replies; 5+ messages in thread From: Neil Armstrong @ 2026-06-18 12:43 UTC (permalink / raw) To: Arpit Saini, Jessica Zhang, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel, ayushi.makhija, rajeevny On 6/18/26 12:24, Arpit Saini wrote: > Add a DRM panel driver for the DLC DLC0697 1080x1920@60Hz MIPI DSI > panel based on the Ilitek ILI7807S display controller. > > The panel operates in video burst mode with four data lanes using > RGB888 pixel format. > > Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com> > --- > drivers/gpu/drm/panel/Kconfig | 12 ++ > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-ilitek-ili7807s.c | 297 ++++++++++++++++++++++++++ > 3 files changed, 310 insertions(+) > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 7450b27622a2..1cbaac1bf545 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -264,6 +264,18 @@ config DRM_PANEL_HYDIS_HV101HD1 > > If M is selected the module will be called panel-hydis-hv101hd1 > > +config DRM_PANEL_ILITEK_ILI7807S > + tristate "Ilitek ILI7807S-based panels" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y if you want to enable support for panels based on the > + Ilitek ILI7807S display controller, such as the DLC DLC0697 > + 1080x1920 MIPI DSI panel. > + > + If M is selected the module will be called panel-ilitek-ili7807s. > + > config DRM_PANEL_ILITEK_IL9322 > tristate "Ilitek ILI9322 320x240 QVGA panels" > depends on OF && SPI > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index c2c5cf817116..c3002b351cb8 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -26,6 +26,7 @@ obj-$(CONFIG_DRM_PANEL_HIMAX_HX83112B) += panel-himax-hx83112b.o > obj-$(CONFIG_DRM_PANEL_HIMAX_HX83121A) += panel-himax-hx83121a.o > obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o > obj-$(CONFIG_DRM_PANEL_HYDIS_HV101HD1) += panel-hydis-hv101hd1.o > +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI7807S) += panel-ilitek-ili7807s.o > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9805) += panel-ilitek-ili9805.o > diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c b/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c > new file mode 100644 > index 000000000000..bfbb8e29a4aa > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-ilitek-ili7807s.c > @@ -0,0 +1,297 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. > + */ > + > +#include <linux/backlight.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > +#include <drm/drm_probe_helper.h> > + > +struct panel_desc { > + const struct drm_display_mode *mode; > + unsigned int lanes; > + enum mipi_dsi_pixel_format format; > + unsigned long mode_flags; > + void (*init)(struct mipi_dsi_multi_context *dsi_ctx); > +}; > + > +struct ili7807s { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi; > + const struct panel_desc *desc; > + > + struct regulator_bulk_data *supplies; > + struct gpio_desc *reset_gpio; > +}; > + > +static const struct regulator_bulk_data ili7807s_supplies[] = { > + { .supply = "vddi" }, > + { .supply = "avdd" }, > + { .supply = "avee" }, > +}; > + > +static inline struct ili7807s *to_ili7807s(struct drm_panel *panel) > +{ > + return container_of(panel, struct ili7807s, panel); > +} > + > +static void ili7807s_reset(struct ili7807s *ctx) > +{ > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(10000, 11000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + usleep_range(10000, 11000); > + gpiod_set_value_cansleep(ctx->reset_gpio, 0); > + usleep_range(10000, 11000); > +} > + > +static void dlc0697_init_sequence(struct mipi_dsi_multi_context *dsi_ctx) > +{ > + mipi_dsi_dcs_soft_reset_multi(dsi_ctx); > + mipi_dsi_msleep(dsi_ctx, 120); > + > + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0xff, 0x78, 0x07, 0x00); > + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x35, 0x00); > + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x5e, 0x09, 0x99); > + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x53, 0x24); > + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x55, 0x01); > + mipi_dsi_dcs_write_seq_multi(dsi_ctx, 0x51, 0x3f, 0xff); > + > + mipi_dsi_dcs_exit_sleep_mode_multi(dsi_ctx); > + mipi_dsi_msleep(dsi_ctx, 120); > + > + mipi_dsi_dcs_set_display_on_multi(dsi_ctx); > + mipi_dsi_msleep(dsi_ctx, 20); > +} > + > +static int ili7807s_on(struct ili7807s *ctx) > +{ > + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; > + > + ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + ctx->desc->init(&dsi_ctx); > + > + ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + return dsi_ctx.accum_err; > +} > + > +static int ili7807s_off(struct ili7807s *ctx) > +{ > + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; > + > + ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + mipi_dsi_dcs_set_display_off_multi(&dsi_ctx); > + mipi_dsi_msleep(&dsi_ctx, 20); > + > + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); > + mipi_dsi_msleep(&dsi_ctx, 120); > + > + ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + return dsi_ctx.accum_err; > +} > + > +static int ili7807s_prepare(struct drm_panel *panel) > +{ > + struct ili7807s *ctx = to_ili7807s(panel); > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies); > + if (ret < 0) { > + dev_err(ctx->panel.dev, "failed to enable regulators: %d\n", ret); > + return ret; > + } > + > + msleep(20); > + > + ili7807s_reset(ctx); > + > + ret = ili7807s_on(ctx); > + if (ret < 0) { > + dev_err(ctx->panel.dev, "failed to initialise panel: %d\n", ret); > + goto err; > + } > + > + return 0; > + > +err: > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + > + regulator_bulk_disable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies); > + return ret; > +} > + > +static int ili7807s_unprepare(struct drm_panel *panel) > +{ > + struct ili7807s *ctx = to_ili7807s(panel); > + int ret; > + > + ret = ili7807s_off(ctx); > + if (ret < 0) > + dev_err(ctx->panel.dev, "failed to disable panel: %d\n", ret); > + > + gpiod_set_value_cansleep(ctx->reset_gpio, 1); > + > + regulator_bulk_disable(ARRAY_SIZE(ili7807s_supplies), ctx->supplies); > + > + return 0; > +} > + > +static int ili7807s_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + struct ili7807s *ctx = to_ili7807s(panel); > + > + return drm_connector_helper_get_modes_fixed(connector, ctx->desc->mode); > +} > + > +static const struct drm_panel_funcs ili7807s_panel_funcs = { > + .prepare = ili7807s_prepare, > + .unprepare = ili7807s_unprepare, > + .get_modes = ili7807s_get_modes, > +}; > + > +static int ili7807s_bl_update_status(struct backlight_device *bl) > +{ > + struct mipi_dsi_device *dsi = bl_get_data(bl); > + u16 brightness = backlight_get_brightness(bl); > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + return ret; > +} > + > +static const struct backlight_ops ili7807s_bl_ops = { > + .update_status = ili7807s_bl_update_status, > +}; > + > +static struct backlight_device *ili7807s_create_backlight(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + const struct backlight_properties props = { > + .type = BACKLIGHT_RAW, > + .brightness = 0x3fff, > + .max_brightness = 0x3fff, > + }; > + > + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, > + &ili7807s_bl_ops, &props); > +} > + > +static const struct drm_display_mode dlc0697_mode = { > + .clock = 131911, .clock = (1080 + 18 + 2 + 16) * (1920 + 26 + 4 + 20) * 60 / 1000, > + > + .hdisplay = 1080, > + .hsync_start = 1080 + 18, > + .hsync_end = 1080 + 18 + 2, > + .htotal = 1080 + 18 + 2 + 16, > + > + .vdisplay = 1920, > + .vsync_start = 1920 + 26, > + .vsync_end = 1920 + 26 + 4, > + .vtotal = 1920 + 26 + 4 + 20, > + > + .width_mm = 0, > + .height_mm = 0, > + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, > +}; > + > +static const struct panel_desc dlc0697_desc = { > + .mode = &dlc0697_mode, > + .lanes = 4, > + .format = MIPI_DSI_FMT_RGB888, > + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST, > + .init = dlc0697_init_sequence, > +}; > + > +static int ili7807s_probe(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + const struct panel_desc *desc; > + struct ili7807s *ctx; > + int ret; > + > + ctx = devm_drm_panel_alloc(dev, struct ili7807s, panel, > + &ili7807s_panel_funcs, > + DRM_MODE_CONNECTOR_DSI); > + if (IS_ERR(ctx)) > + return PTR_ERR(ctx); > + > + desc = of_device_get_match_data(dev); > + ctx->desc = desc; > + > + ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(ili7807s_supplies), > + ili7807s_supplies, &ctx->supplies); > + if (ret < 0) > + return dev_err_probe(dev, ret, "failed to get regulators\n"); > + > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ctx->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), > + "failed to get reset gpio\n"); > + > + ctx->dsi = dsi; > + mipi_dsi_set_drvdata(dsi, ctx); > + > + dsi->lanes = desc->lanes; > + dsi->format = desc->format; > + dsi->mode_flags = desc->mode_flags; > + > + ctx->panel.prepare_prev_first = true; > + > + ret = drm_panel_of_backlight(&ctx->panel); > + if (ret) > + return ret; > + > + if (!ctx->panel.backlight) { > + ctx->panel.backlight = ili7807s_create_backlight(dsi); > + if (IS_ERR(ctx->panel.backlight)) > + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), > + "failed to create backlight\n"); > + } > + > + ret = devm_drm_panel_add(dev, &ctx->panel); > + if (ret < 0) > + return dev_err_probe(dev, ret, "failed to add panel\n"); > + > + ret = devm_mipi_dsi_attach(dev, dsi); > + if (ret < 0) > + return dev_err_probe(dev, ret, "failed to attach dsi\n"); > + > + return 0; Return devm_mipi_dsi_attach() directly > +} > + > +static const struct of_device_id ili7807s_of_match[] = { > + { .compatible = "dlc,dlc0697", .data = &dlc0697_desc }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, ili7807s_of_match); > + > +static struct mipi_dsi_driver ili7807s_dsi_driver = { > + .probe = ili7807s_probe, > + .driver = { > + .name = "panel-ilitek-ili7807s", > + .of_match_table = ili7807s_of_match, > + }, > +}; > +module_mipi_dsi_driver(ili7807s_dsi_driver); > + > +MODULE_AUTHOR("Arpit Saini <arpit.saini@oss.qualcomm.com>"); > +MODULE_DESCRIPTION("Panel driver for Ilitek ILI7807S LCD DSI panel"); > +MODULE_LICENSE("GPL"); > Thanks, Neil ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-06-22 11:04 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2026-06-18 10:24 [PATCH v2 0/2] drm/panel: add support for Ilitek ILI7807S DSI panels Arpit Saini 2026-06-18 10:24 ` [PATCH v2 1/2] dt-bindings: display: panel: add Ilitek ILI7807S panel controller Arpit Saini 2026-06-22 11:04 ` Krzysztof Kozlowski 2026-06-18 10:24 ` [PATCH v2 2/2] drm/panel: add Ilitek ILI7807S panel driver Arpit Saini 2026-06-18 12:43 ` Neil Armstrong
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®