From: "Jackson.lee" <jackson.lee@chipsnmedia.com>
To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
nicolas.dufresne@collabora.com, bob.beckett@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
jackson.lee@chipsnmedia.com, lafley.kim@chipsnmedia.com,
b-brnich@ti.com, hverkuil@xs4all.nl, nas.chung@chipsnmedia.com,
stable@vger.kernel.org
Subject: [PATCH v1 2/7] media: chips-media: wave5: Set inst->std during default format initialization
Date: Fri, 26 Jun 2026 10:22:27 +0900 [thread overview]
Message-ID: <20260626012232.111-3-jackson.lee@chipsnmedia.com> (raw)
In-Reply-To: <20260626012232.111-1-jackson.lee@chipsnmedia.com>
From: Jackson Lee <jackson.lee@chipsnmedia.com>
When the encoder is opened, wave5_set_default_format() sets up the
default capture format (e.g. H.264) but does not initialize inst->std.
As a result, inst->std remains zero, which does not match any valid
encoder codec.
If STREAMON is called before the user explicitly calls S_FMT on the
capture queue — as v4l2-compliance does in testBlockingDQBuf — the
codec/product check in wave5_vpu_enc_init_seq() fails with
"Unsupported encoder-codec & product combination" because inst->std
is neither W_HEVC_ENC nor W_AVC_ENC, returning -EOPNOTSUPP.
Fix this by setting inst->std via wave5_to_vpu_std() in
wave5_set_default_format(), so that the codec type is always consistent
with the default capture pixel format from the moment the instance is
opened.
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
---
drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
index e6c94b6f2671..f9fcdf4c224b 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
@@ -1494,7 +1494,8 @@ static const struct vb2_ops wave5_vpu_enc_vb2_ops = {
.stop_streaming = wave5_vpu_enc_stop_streaming,
};
-static void wave5_set_default_format(struct v4l2_pix_format_mplane *src_fmt,
+static void wave5_set_default_format(struct vpu_instance *inst,
+ struct v4l2_pix_format_mplane *src_fmt,
struct v4l2_pix_format_mplane *dst_fmt)
{
src_fmt->pixelformat = enc_fmt_list[VPU_FMT_TYPE_RAW][0].v4l2_pix_fmt;
@@ -1506,6 +1507,7 @@ static void wave5_set_default_format(struct v4l2_pix_format_mplane *src_fmt,
wave5_update_pix_fmt(dst_fmt, VPU_FMT_TYPE_CODEC,
W5_DEF_ENC_PIC_WIDTH, W5_DEF_ENC_PIC_HEIGHT,
&enc_frmsize[VPU_FMT_TYPE_CODEC]);
+ inst->std = wave5_to_vpu_std(dst_fmt->pixelformat, inst->type);
}
static int wave5_vpu_enc_queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
@@ -1770,7 +1772,7 @@ static int wave5_vpu_open_enc(struct file *filp)
inst->v4l2_fh.ctrl_handler = v4l2_ctrl_hdl;
v4l2_ctrl_handler_setup(v4l2_ctrl_hdl);
- wave5_set_default_format(&inst->src_fmt, &inst->dst_fmt);
+ wave5_set_default_format(inst, &inst->src_fmt, &inst->dst_fmt);
inst->conf_win.width = inst->dst_fmt.width;
inst->conf_win.height = inst->dst_fmt.height;
inst->colorspace = V4L2_COLORSPACE_REC709;
--
2.43.0
next prev parent reply other threads:[~2026-06-26 1:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 1:22 [PATCH v1 0/7] bug fixes Jackson.lee
2026-06-26 1:22 ` [PATCH v1 1/7] media: chips-media: wave5: Guard bit depth check with initial_info_obtained Jackson.lee
2026-07-16 1:56 ` Nicolas Dufresne
2026-06-26 1:22 ` Jackson.lee [this message]
2026-07-16 1:58 ` [PATCH v1 2/7] media: chips-media: wave5: Set inst->std during default format initialization Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 3/7] media: chips-media: wave5: avoid skipping device_run while VPU has work Jackson.lee
2026-07-16 2:00 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 4/7] media: chips-media: wave5: Add timeout while stop_streaming Jackson.lee
2026-07-16 2:08 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 5/7] media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Jackson.lee
2026-07-16 2:13 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 6/7] media: chips-media: wave5: Fix pipeline stall when queuing fails Jackson.lee
2026-07-16 2:14 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 7/7] media: chips-media: wave5: Resume device before setting EOS flag Jackson.lee
2026-07-16 2:18 ` Nicolas Dufresne
2026-07-16 6:16 ` jackson.lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260626012232.111-3-jackson.lee@chipsnmedia.com \
--to=jackson.lee@chipsnmedia.com \
--cc=b-brnich@ti.com \
--cc=bob.beckett@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=hverkuil@xs4all.nl \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®