From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: "Jackson.lee" <jackson.lee@chipsnmedia.com>,
mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
bob.beckett@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
lafley.kim@chipsnmedia.com, b-brnich@ti.com, hverkuil@xs4all.nl,
nas.chung@chipsnmedia.com, stable@vger.kernel.org
Subject: Re: [PATCH v1 2/7] media: chips-media: wave5: Set inst->std during default format initialization
Date: Wed, 15 Jul 2026 21:58:18 -0400 [thread overview]
Message-ID: <67a3a66a1c7e6935041b0afbad6efce8b12a89c1.camel@collabora.com> (raw)
In-Reply-To: <20260626012232.111-3-jackson.lee@chipsnmedia.com>
[-- Attachment #1: Type: text/plain, Size: 3069 bytes --]
Le vendredi 26 juin 2026 à 10:22 +0900, Jackson.lee a écrit :
> From: Jackson Lee <jackson.lee@chipsnmedia.com>
>
> When the encoder is opened, wave5_set_default_format() sets up the
> default capture format (e.g. H.264) but does not initialize inst->std.
> As a result, inst->std remains zero, which does not match any valid
> encoder codec.
>
> If STREAMON is called before the user explicitly calls S_FMT on the
> capture queue — as v4l2-compliance does in testBlockingDQBuf — the
> codec/product check in wave5_vpu_enc_init_seq() fails with
> "Unsupported encoder-codec & product combination" because inst->std
> is neither W_HEVC_ENC nor W_AVC_ENC, returning -EOPNOTSUPP.
>
> Fix this by setting inst->std via wave5_to_vpu_std() in
> wave5_set_default_format(), so that the codec type is always consistent
> with the default capture pixel format from the moment the instance is
> opened.
>
> Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer")
> Cc: stable@vger.kernel.org
> Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
> ---
> drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
> index e6c94b6f2671..f9fcdf4c224b 100644
> --- a/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
> +++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-enc.c
> @@ -1494,7 +1494,8 @@ static const struct vb2_ops wave5_vpu_enc_vb2_ops = {
> .stop_streaming = wave5_vpu_enc_stop_streaming,
> };
>
> -static void wave5_set_default_format(struct v4l2_pix_format_mplane *src_fmt,
> +static void wave5_set_default_format(struct vpu_instance *inst,
> + struct v4l2_pix_format_mplane *src_fmt,
> struct v4l2_pix_format_mplane *dst_fmt)
> {
> src_fmt->pixelformat = enc_fmt_list[VPU_FMT_TYPE_RAW][0].v4l2_pix_fmt;
> @@ -1506,6 +1507,7 @@ static void wave5_set_default_format(struct v4l2_pix_format_mplane *src_fmt,
> wave5_update_pix_fmt(dst_fmt, VPU_FMT_TYPE_CODEC,
> W5_DEF_ENC_PIC_WIDTH, W5_DEF_ENC_PIC_HEIGHT,
> &enc_frmsize[VPU_FMT_TYPE_CODEC]);
> + inst->std = wave5_to_vpu_std(dst_fmt->pixelformat, inst->type);
> }
>
> static int wave5_vpu_enc_queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
> @@ -1770,7 +1772,7 @@ static int wave5_vpu_open_enc(struct file *filp)
> inst->v4l2_fh.ctrl_handler = v4l2_ctrl_hdl;
> v4l2_ctrl_handler_setup(v4l2_ctrl_hdl);
>
> - wave5_set_default_format(&inst->src_fmt, &inst->dst_fmt);
> + wave5_set_default_format(inst, &inst->src_fmt, &inst->dst_fmt);
> inst->conf_win.width = inst->dst_fmt.width;
> inst->conf_win.height = inst->dst_fmt.height;
> inst->colorspace = V4L2_COLORSPACE_REC709;
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2026-07-16 1:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 1:22 [PATCH v1 0/7] bug fixes Jackson.lee
2026-06-26 1:22 ` [PATCH v1 1/7] media: chips-media: wave5: Guard bit depth check with initial_info_obtained Jackson.lee
2026-07-16 1:56 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 2/7] media: chips-media: wave5: Set inst->std during default format initialization Jackson.lee
2026-07-16 1:58 ` Nicolas Dufresne [this message]
2026-06-26 1:22 ` [PATCH v1 3/7] media: chips-media: wave5: avoid skipping device_run while VPU has work Jackson.lee
2026-07-16 2:00 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 4/7] media: chips-media: wave5: Add timeout while stop_streaming Jackson.lee
2026-07-16 2:08 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 5/7] media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Jackson.lee
2026-07-16 2:13 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 6/7] media: chips-media: wave5: Fix pipeline stall when queuing fails Jackson.lee
2026-07-16 2:14 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 7/7] media: chips-media: wave5: Resume device before setting EOS flag Jackson.lee
2026-07-16 2:18 ` Nicolas Dufresne
2026-07-16 6:16 ` jackson.lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=67a3a66a1c7e6935041b0afbad6efce8b12a89c1.camel@collabora.com \
--to=nicolas.dufresne@collabora.com \
--cc=b-brnich@ti.com \
--cc=bob.beckett@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=hverkuil@xs4all.nl \
--cc=jackson.lee@chipsnmedia.com \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®