From: "Jackson.lee" <jackson.lee@chipsnmedia.com>
To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
nicolas.dufresne@collabora.com, bob.beckett@collabora.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
jackson.lee@chipsnmedia.com, lafley.kim@chipsnmedia.com,
b-brnich@ti.com, hverkuil@xs4all.nl, nas.chung@chipsnmedia.com,
stable@vger.kernel.org
Subject: [PATCH v1 5/7] media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued
Date: Fri, 26 Jun 2026 10:22:30 +0900 [thread overview]
Message-ID: <20260626012232.111-6-jackson.lee@chipsnmedia.com> (raw)
In-Reply-To: <20260626012232.111-1-jackson.lee@chipsnmedia.com>
From: Jackson Lee <jackson.lee@chipsnmedia.com>
Decoder instances sharing a VPU also share one v4l2_m2m job slot, released
when the running context calls v4l2_m2m_job_finish(). While draining,
device_run() defers job_finish() once EOS is sent (sent_eos), expecting a
later finish_decode() (from a DEC_PIC completion IRQ) to release the slot.
But the m2m core checks job_ready() only when a job is queued, not when it
is dispatched. A job queued while draining can run after finish_decode()
has already moved the instance to STOP and sent EOS. device_run() then runs
in STOP, issues no DEC_PIC, yet still skips job_finish() - so no IRQ, no
finish_decode(), and the shared slot is leaked, stalling every instance.
With several v4l2h264dec instances in parallel, GStreamer hangs at EOS.
Track whether the run actually queued a DEC_PIC (cmd_issued) and defer
job_finish() only then. Otherwise finish the job immediately
Fixes: a176ac5e701f ("media: chips-media: wave5: Improve performance of decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
---
.../media/platform/chips-media/wave5/wave5-vpu-dec.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
index 93f7b724d86c..f33c00cb801b 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
@@ -1655,6 +1655,7 @@ static void wave5_vpu_dec_device_run(void *priv)
struct queue_status_info q_status;
u32 fail_res = 0;
int ret = 0;
+ bool cmd_issued = false;
dev_dbg(inst->dev->dev, "%s: Fill the ring buffer with new bitstream data", __func__);
pm_runtime_resume_and_get(inst->dev->dev);
@@ -1752,6 +1753,7 @@ static void wave5_vpu_dec_device_run(void *priv)
inst->retry = false;
if (!inst->eos)
inst->queuing_num--;
+ cmd_issued = true;
}
break;
default:
@@ -1769,8 +1771,16 @@ static void wave5_vpu_dec_device_run(void *priv)
* in power and CPU time.
* If EOS is passed, device_run will not call job_finish no more, it is called
* only if HW is idle status in order to reduce overhead.
+ *
+ * Deferring job_finish() is only safe when this run actually queued a
+ * DEC_PIC command (cmd_issued): that guarantees a completion IRQ, and
+ * thus a later finish_decode(), will release the shared job slot. When
+ * device_run() is entered with no command to issue (e.g. a job that was
+ * queued while draining but reached the STOP state by the time it ran),
+ * no IRQ follows, so finish the job here to avoid leaking the slot and
+ * stalling every instance sharing the VPU.
*/
- if (!inst->sent_eos)
+ if (!inst->sent_eos || !cmd_issued)
v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
}
--
2.43.0
next prev parent reply other threads:[~2026-06-26 1:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 1:22 [PATCH v1 0/7] bug fixes Jackson.lee
2026-06-26 1:22 ` [PATCH v1 1/7] media: chips-media: wave5: Guard bit depth check with initial_info_obtained Jackson.lee
2026-07-16 1:56 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 2/7] media: chips-media: wave5: Set inst->std during default format initialization Jackson.lee
2026-07-16 1:58 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 3/7] media: chips-media: wave5: avoid skipping device_run while VPU has work Jackson.lee
2026-07-16 2:00 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 4/7] media: chips-media: wave5: Add timeout while stop_streaming Jackson.lee
2026-07-16 2:08 ` Nicolas Dufresne
2026-06-26 1:22 ` Jackson.lee [this message]
2026-07-16 2:13 ` [PATCH v1 5/7] media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 6/7] media: chips-media: wave5: Fix pipeline stall when queuing fails Jackson.lee
2026-07-16 2:14 ` Nicolas Dufresne
2026-06-26 1:22 ` [PATCH v1 7/7] media: chips-media: wave5: Resume device before setting EOS flag Jackson.lee
2026-07-16 2:18 ` Nicolas Dufresne
2026-07-16 6:16 ` jackson.lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260626012232.111-6-jackson.lee@chipsnmedia.com \
--to=jackson.lee@chipsnmedia.com \
--cc=b-brnich@ti.com \
--cc=bob.beckett@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=hverkuil@xs4all.nl \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®