[PATCH v2] i2c: qcom-geni: Use devm_pm_runtime_enable() for PM management

[PATCH v2] i2c: qcom-geni: Use devm_pm_runtime_enable() for PM management

[Mukesh Kumar Savaliya]

The current implementation manually calls pm_runtime_enable() in probe()
and pm_runtime_disable() in remove() and error paths. This pattern is
error-prone and requires careful cleanup in all failure paths. Using the
devres-managed variant eliminates this complexity.

Migrate from manual pm_runtime_enable()/pm_runtime_disable() calls to
the devres-managed devm_pm_runtime_enable() API. This simplifies the
driver by automatically handling runtime PM cleanup when the device is
removed or probe fails. This helps  with Simplified error handling and
Automatic cleanup.

Signed-off-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
---
v1->v2:
- Fix runtime PM init ordering by calling devm_pm_runtime_enable() after PM state setup.
- Remove unnecessary commit message details.
- Address review feedback from Konrad Dybcio.

Link to v1: https://lore.kernel.org/all/20260710121356.4054600-1-mukesh.savaliya@oss.qualcomm.com/

---
 drivers/i2c/busses/i2c-qcom-geni.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 96dbf04138be..d5c977e34994 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -1126,27 +1126,25 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	gi2c->adap.dev.of_node = dev->of_node;
 	strscpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
-	pm_runtime_set_suspended(gi2c->se.dev);
-	pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY);
-	pm_runtime_use_autosuspend(gi2c->se.dev);
-	pm_runtime_enable(gi2c->se.dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_set_autosuspend_delay(dev, I2C_AUTO_SUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
 
 	ret = geni_i2c_init(gi2c);
-	if (ret < 0) {
-		pm_runtime_disable(gi2c->se.dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	ret = i2c_add_adapter(&gi2c->adap);
-	if (ret) {
-		dev_err_probe(dev, ret, "Error adding i2c adapter\n");
-		pm_runtime_disable(gi2c->se.dev);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Error adding i2c adapter\n");
 
 	dev_dbg(dev, "Geni-I2C adaptor successfully added\n");
 
-	return ret;
+	return 0;
 }
 
 static void geni_i2c_remove(struct platform_device *pdev)
@@ -1155,7 +1153,6 @@ static void geni_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&gi2c->adap);
 	release_gpi_dma(gi2c);
-	pm_runtime_disable(gi2c->se.dev);
 }
 
 static void geni_i2c_shutdown(struct platform_device *pdev)
-- 
2.43.0

Re: [PATCH v2] i2c: qcom-geni: Use devm_pm_runtime_enable() for PM management

[Konrad Dybcio]

On 7/13/26 8:41 AM, Mukesh Kumar Savaliya wrote:
> The current implementation manually calls pm_runtime_enable() in probe()
> and pm_runtime_disable() in remove() and error paths. This pattern is
> error-prone and requires careful cleanup in all failure paths. Using the
> devres-managed variant eliminates this complexity.
> 
> Migrate from manual pm_runtime_enable()/pm_runtime_disable() calls to
> the devres-managed devm_pm_runtime_enable() API. This simplifies the
> driver by automatically handling runtime PM cleanup when the device is
> removed or probe fails. This helps  with Simplified error handling and
> Automatic cleanup.
> 
> Signed-off-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad