From: Guangshuo Li <lgs201920130244@gmail.com>
To: Nas Chung <nas.chung@chipsnmedia.com>,
Jackson Lee <jackson.lee@chipsnmedia.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Nicolas Dufresne <nicolas.dufresne@collabora.com>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Guangshuo Li <lgs201920130244@gmail.com>
Subject: [PATCH v2 2/2] media: chips-media: wave5: Check decoder runtime resume errors
Date: Sat, 18 Jul 2026 21:00:37 +0800 [thread overview]
Message-ID: <20260718130037.3306626-3-lgs201920130244@gmail.com> (raw)
In-Reply-To: <20260718130037.3306626-1-lgs201920130244@gmail.com>
The decoder start_streaming, stop_streaming and device_run callbacks
resume the VPU before accessing hardware, but do not check the return
value from pm_runtime_resume_and_get().
If runtime resume fails, continuing can access the VPU while it remains
suspended. Since pm_runtime_resume_and_get() does not retain a runtime PM
usage reference on failure, the later unconditional
pm_runtime_put_autosuspend() can also drop an unmatched reference.
Check the return value in all three callbacks. Return queued buffers as
required by vb2 when start_streaming fails, clean up buffers without
touching hardware when stop_streaming fails, and finish the current
mem2mem job when device_run cannot resume.
Only call pm_runtime_put_autosuspend() after a successful runtime
resume.
Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
---
.../chips-media/wave5/wave5-vpu-dec.c | 36 +++++++++++++++++--
1 file changed, 33 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
index 03d108b808ba..bb59bc962603 100644
--- a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
+++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
@@ -1380,7 +1380,11 @@ static int wave5_vpu_dec_start_streaming(struct vb2_queue *q, unsigned int count
int ret = 0;
dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
- pm_runtime_resume_and_get(inst->dev->dev);
+ ret = pm_runtime_resume_and_get(inst->dev->dev);
+ if (ret < 0) {
+ wave5_return_bufs(q, VB2_BUF_STATE_QUEUED);
+ return ret;
+ }
v4l2_m2m_update_start_streaming_state(m2m_ctx, q);
@@ -1544,9 +1548,29 @@ static void wave5_vpu_dec_stop_streaming(struct vb2_queue *q)
struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
bool check_cmd = TRUE;
+ int ret;
dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
- pm_runtime_resume_and_get(inst->dev->dev);
+ ret = pm_runtime_resume_and_get(inst->dev->dev);
+ if (ret < 0) {
+ struct vpu_src_buffer *vpu_buf;
+
+ v4l2_m2m_update_stop_streaming_state(m2m_ctx, q);
+
+ if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ inst->retry = false;
+ inst->queuing_num = 0;
+ while ((vpu_buf = inst_src_buf_remove(inst)) != NULL)
+ ;
+ inst->eos = false;
+ }
+
+ wave5_return_bufs(q, VB2_BUF_STATE_ERROR);
+ inst->empty_queue = false;
+ inst->sent_eos = false;
+ return;
+ }
+
inst->empty_queue = true;
while (check_cmd) {
struct queue_status_info q_status;
@@ -1659,7 +1683,13 @@ static void wave5_vpu_dec_device_run(void *priv)
int ret = 0;
dev_dbg(inst->dev->dev, "%s: Fill the ring buffer with new bitstream data", __func__);
- pm_runtime_resume_and_get(inst->dev->dev);
+
+ ret = pm_runtime_resume_and_get(inst->dev->dev);
+ if (ret < 0) {
+ v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
+ return;
+ }
+
if (!inst->retry) {
ret = fill_ringbuffer(inst);
if (ret < 0) {
--
2.43.0
next prev parent reply other threads:[~2026-07-18 13:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-18 13:00 [PATCH v2 0/2] media: chips-media: wave5: Handle decoder runtime resume failures Guangshuo Li
2026-07-18 13:00 ` [PATCH v2 1/2] media: chips-media: wave5: Check decoder qbuf runtime resume Guangshuo Li
2026-09-28 21:10 ` Nicolas Dufresne
2026-07-18 13:00 ` Guangshuo Li [this message]
2026-09-28 21:13 ` [PATCH v2 2/2] media: chips-media: wave5: Check decoder runtime resume errors Nicolas Dufresne
2026-09-28 21:21 ` Nicolas Dufresne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260718130037.3306626-3-lgs201920130244@gmail.com \
--to=lgs201920130244@gmail.com \
--cc=hverkuil+cisco@kernel.org \
--cc=jackson.lee@chipsnmedia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®