From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: Guangshuo Li <lgs201920130244@gmail.com>,
Nas Chung <nas.chung@chipsnmedia.com>,
Jackson Lee <jackson.lee@chipsnmedia.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] media: chips-media: wave5: Check decoder runtime resume errors
Date: Mon, 28 Sep 2026 17:21:22 -0400 [thread overview]
Message-ID: <700f89155d390d4fc9695440f5105d2ade57f8b1.camel@collabora.com> (raw)
In-Reply-To: <1c34bc88f347384568438058ab69e4d0bc7bb9ca.camel@collabora.com>
[-- Attachment #1: Type: text/plain, Size: 3852 bytes --]
Le lundi 28 septembre 2026 à 17:13 -0400, Nicolas Dufresne a écrit :
> Le samedi 18 juillet 2026 à 21:00 +0800, Guangshuo Li a écrit :
> > The decoder start_streaming, stop_streaming and device_run callbacks
> > resume the VPU before accessing hardware, but do not check the return
> > value from pm_runtime_resume_and_get().
> >
> > If runtime resume fails, continuing can access the VPU while it remains
> > suspended. Since pm_runtime_resume_and_get() does not retain a runtime PM
> > usage reference on failure, the later unconditional
> > pm_runtime_put_autosuspend() can also drop an unmatched reference.
> >
> > Check the return value in all three callbacks. Return queued buffers as
> > required by vb2 when start_streaming fails, clean up buffers without
> > touching hardware when stop_streaming fails, and finish the current
> > mem2mem job when device_run cannot resume.
> >
> > Only call pm_runtime_put_autosuspend() after a successful runtime
> > resume.
> >
> > Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume")
> > Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
>
> Reviewed-by: Nicolas Dufresne ņicolas.dufresne@collabora.com>
>
> Picked, ty
Spoken too fast, I picked the first, please rebase and resubmit this one, it has
conflicts that are non trivial to fix.
Nicolas
>
> > ---
> > .../chips-media/wave5/wave5-vpu-dec.c | 36 +++++++++++++++++--
> > 1 file changed, 33 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> > index 03d108b808ba..bb59bc962603 100644
> > --- a/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> > +++ b/drivers/media/platform/chips-media/wave5/wave5-vpu-dec.c
> > @@ -1380,7 +1380,11 @@ static int wave5_vpu_dec_start_streaming(struct vb2_queue *q, unsigned int count
> > int ret = 0;
> >
> > dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
> > - pm_runtime_resume_and_get(inst->dev->dev);
> > + ret = pm_runtime_resume_and_get(inst->dev->dev);
> > + if (ret < 0) {
> > + wave5_return_bufs(q, VB2_BUF_STATE_QUEUED);
> > + return ret;
> > + }
> >
> > v4l2_m2m_update_start_streaming_state(m2m_ctx, q);
> >
> > @@ -1544,9 +1548,29 @@ static void wave5_vpu_dec_stop_streaming(struct vb2_queue *q)
> > struct v4l2_m2m_ctx *m2m_ctx = inst->v4l2_fh.m2m_ctx;
> >
> > bool check_cmd = TRUE;
> > + int ret;
> >
> > dev_dbg(inst->dev->dev, "%s: type: %u\n", __func__, q->type);
> > - pm_runtime_resume_and_get(inst->dev->dev);
> > + ret = pm_runtime_resume_and_get(inst->dev->dev);
> > + if (ret < 0) {
> > + struct vpu_src_buffer *vpu_buf;
> > +
> > + v4l2_m2m_update_stop_streaming_state(m2m_ctx, q);
> > +
> > + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> > + inst->retry = false;
> > + inst->queuing_num = 0;
> > + while ((vpu_buf = inst_src_buf_remove(inst)) != NULL)
> > + ;
> > + inst->eos = false;
> > + }
> > +
> > + wave5_return_bufs(q, VB2_BUF_STATE_ERROR);
> > + inst->empty_queue = false;
> > + inst->sent_eos = false;
> > + return;
> > + }
> > +
> > inst->empty_queue = true;
> > while (check_cmd) {
> > struct queue_status_info q_status;
> > @@ -1659,7 +1683,13 @@ static void wave5_vpu_dec_device_run(void *priv)
> > int ret = 0;
> >
> > dev_dbg(inst->dev->dev, "%s: Fill the ring buffer with new bitstream data", __func__);
> > - pm_runtime_resume_and_get(inst->dev->dev);
> > +
> > + ret = pm_runtime_resume_and_get(inst->dev->dev);
> > + if (ret < 0) {
> > + v4l2_m2m_job_finish(inst->v4l2_m2m_dev, m2m_ctx);
> > + return;
> > + }
> > +
> > if (!inst->retry) {
> > ret = fill_ringbuffer(inst);
> > if (ret < 0) {
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
prev parent reply other threads:[~2026-09-28 21:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-18 13:00 [PATCH v2 0/2] media: chips-media: wave5: Handle decoder runtime resume failures Guangshuo Li
2026-07-18 13:00 ` [PATCH v2 1/2] media: chips-media: wave5: Check decoder qbuf runtime resume Guangshuo Li
2026-09-28 21:10 ` Nicolas Dufresne
2026-07-18 13:00 ` [PATCH v2 2/2] media: chips-media: wave5: Check decoder runtime resume errors Guangshuo Li
2026-09-28 21:13 ` Nicolas Dufresne
2026-09-28 21:21 ` Nicolas Dufresne [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=700f89155d390d4fc9695440f5105d2ade57f8b1.camel@collabora.com \
--to=nicolas.dufresne@collabora.com \
--cc=hverkuil+cisco@kernel.org \
--cc=jackson.lee@chipsnmedia.com \
--cc=lgs201920130244@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®