[PATCH v4 0/5] arm64: dts: qcom: Add Kalambo SoC and CRD

[PATCH v4 0/5] arm64: dts: qcom: Add Kalambo SoC and CRD

[Gopikrishna Garmidi]

Qualcomm Kalambo SoC is derived from Mahua SoC with CPU cluster 0
removed,leaving only cluster 1 present.

This series documents the board compatibles and adds the SoC and
Compute Reference Device (CRD) device trees. It also adds the Kalambo
compatible to the UBWC configuration table and allowlists the Kalambo
CRD for QSEECOM to enable access to efivars.

---
Changes in v4:
- Split PDC range <108 619 22> into <108 619 1> and <111 622 19> to skip
  unconnected pins 109 and 110 on Kalambo. All other PDC ranges match Glymur.
- Rebased on next-20260729.
- Link to v3: https://patch.msgid.link/20260727-b4-kalambo-crd-v3-0-25280faceece@oss.qualcomm.com

Changes in v3:
- Delete and redefine the whole cpu-map via the /cpus label.
- pdp0_mbox: one reg entry per line and use '0x0' instead of '0'.
- Rebased on next-20260726.
- Picked up R-b tags.
- Link to v2: https://patch.msgid.link/20260722-b4-kalambo-crd-v2-0-32d4addc1ac9@oss.qualcomm.com

Changes in v2:
- Fix the cpu-map and SCMI perf domain for the single cluster.
- Give the SCP shared-memory window its own IMEM section.
- Rebased on next-20260721.
- Picked up R-b tags.
- Link to v1: https://patch.msgid.link/20260718-b4-kalambo-crd-v1-0-a1069b5a2757@oss.qualcomm.com

---
Gopikrishna Garmidi (5):
      dt-bindings: arm: qcom: Document Kalambo SoC and board
      arm64: dts: qcom: Add Kalambo SoC
      arm64: dts: qcom: Add Kalambo CRD
      firmware: qcom: scm: Allow QSEECOM on Kalambo CRD
      soc: qcom: ubwc: Add Kalambo UBWC config

 Documentation/devicetree/bindings/arm/qcom.yaml |   5 ++
 arch/arm64/boot/dts/qcom/Makefile               |   1 +
 arch/arm64/boot/dts/qcom/glymur.dtsi            |   4 +-
 arch/arm64/boot/dts/qcom/kalambo-crd.dts        |  21 +++++
 arch/arm64/boot/dts/qcom/kalambo.dtsi           | 112 ++++++++++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c                |   1 +
 drivers/soc/qcom/ubwc_config.c                  |   1 +
 7 files changed, 143 insertions(+), 2 deletions(-)
---
base-commit: 78bc8af4affb9a732504eb22eeac7d1e50883853
change-id: 20260715-b4-kalambo-crd-86912a03bbd2

Best regards,
--  
Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>

[PATCH v4 1/5] dt-bindings: arm: qcom: Document Kalambo SoC and board

[Gopikrishna Garmidi]

Qualcomm Kalambo is a derivative of the Mahua SoC with CPU cluster 0
removed, leaving it with just cluster 1. Document the compatible strings
for the Kalambo SoC and the Compute Reference Device (CRD) board based
on it.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index c7c9a9279684..b0c07a57bda6 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -174,6 +174,11 @@ properties:
               - qcom,kaanapali-qrd
           - const: qcom,kaanapali
 
+      - items:
+          - enum:
+              - qcom,kalambo-crd
+          - const: qcom,kalambo
+
       - items:
           - enum:
               - qcom,mahua-crd

-- 
2.34.1

[PATCH v4 2/5] arm64: dts: qcom: Add Kalambo SoC

[Gopikrishna Garmidi]

Introduce support for the Qualcomm Kalambo SoC. It is derived from Mahua
with CPU cluster 0 removed, leaving it with just cluster 1 (cpu6-cpu11).

The surviving cluster is re-added to the cpu-map as cluster0, since the
kernel stops scanning at the first missing clusterN index. cpu6-cpu11
are reassigned to SCMI performance domain 0, as domain 1 is no longer
present.

Kalambo uses PDP1 whose tx shmem (lpri1) sits at offset 0x200 within
imem, vs 0x180 on Glymur (PDP0). This pushes the tx region end to
0x380, requiring an imem size override. The rx shmem (lpri0) stays at
offset 0x0. The PDP mailbox addresses are overridden to match the
Kalambo SCP firmware.

PDC pins 109 and 110 carry the tsens6 and tsens7 upper/lower interrupts,
which are unconnected on Kalambo since both sensors are absent. Split the
range starting at pin 108 to skip them.

Add labels to the cpus and cpu-map nodes in Glymur to allow derived
SoCs to delete and redefine the cpu-map entirely.

Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi  |   4 +-
 arch/arm64/boot/dts/qcom/kalambo.dtsi | 112 ++++++++++++++++++++++++++++++++++
 2 files changed, 114 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 4be7edf894b5..3f1fd0973717 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -36,7 +36,7 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -274,7 +274,7 @@ cpu17: cpu@20500 {
 			#cooling-cells = <2>;
 		};
 
-		cpu-map {
+		cpu_map: cpu-map {
 			cluster0 {
 				core0 {
 					cpu = <&cpu0>;
diff --git a/arch/arm64/boot/dts/qcom/kalambo.dtsi b/arch/arm64/boot/dts/qcom/kalambo.dtsi
new file mode 100644
index 000000000000..fb5d68bd69d7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/kalambo.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "mahua.dtsi"
+
+/delete-node/ &cluster0_pd;
+/delete-node/ &cpu_map;
+/delete-node/ &cpu0;
+/delete-node/ &cpu1;
+/delete-node/ &cpu2;
+/delete-node/ &cpu3;
+/delete-node/ &cpu4;
+/delete-node/ &cpu5;
+/delete-node/ &cpu_pd0;
+/delete-node/ &cpu_pd1;
+/delete-node/ &cpu_pd2;
+/delete-node/ &cpu_pd3;
+/delete-node/ &cpu_pd4;
+/delete-node/ &cpu_pd5;
+/delete-node/ &cpu_scp_lpri1;
+
+&cpu6 {
+	power-domains = <&cpu_pd6>, <&scmi_perf 0>;
+	power-domain-names = "psci", "perf";
+};
+
+&cpu7 {
+	power-domains = <&cpu_pd7>, <&scmi_perf 0>;
+	power-domain-names = "psci", "perf";
+};
+
+&cpu8 {
+	power-domains = <&cpu_pd8>, <&scmi_perf 0>;
+	power-domain-names = "psci", "perf";
+};
+
+&cpu9 {
+	power-domains = <&cpu_pd9>, <&scmi_perf 0>;
+	power-domain-names = "psci", "perf";
+};
+
+&cpu10 {
+	power-domains = <&cpu_pd10>, <&scmi_perf 0>;
+	power-domain-names = "psci", "perf";
+};
+
+&cpu11 {
+	power-domains = <&cpu_pd11>, <&scmi_perf 0>;
+	power-domain-names = "psci", "perf";
+};
+
+&cpus {
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&cpu6>;
+			};
+
+			core1 {
+				cpu = <&cpu7>;
+			};
+
+			core2 {
+				cpu = <&cpu8>;
+			};
+
+			core3 {
+				cpu = <&cpu9>;
+			};
+
+			core4 {
+				cpu = <&cpu10>;
+			};
+
+			core5 {
+				cpu = <&cpu11>;
+			};
+		};
+	};
+};
+
+&imem {
+	reg = <0x0 0x81e08600 0x0 0x380>;
+	ranges = <0x0 0x0 0x81e08600 0x380>;
+
+	cpu_scp_lpri1: scp-sram-section@200 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x200 0x180>;
+	};
+};
+
+&pdc {
+	qcom,pdc-ranges = <0 745 38>,
+			  <40 785 11>,
+			  <51 527 4>,
+			  <57 533 10>,
+			  <70 546 4>,
+			  <75 551 18>,
+			  <108 619 1>,
+			  <111 622 19>,
+			  <130 717 12>,
+			  <142 251 5>,
+			  <147 796 16>,
+			  <171 4104 36>;
+};
+
+&pdp0_mbox {
+	reg = <0x0 0x17610000 0x0 0x8000>,
+	      <0x0 0x1a980000 0x0 0x8000>;
+};

-- 
2.34.1

[PATCH v4 3/5] arm64: dts: qcom: Add Kalambo CRD

[Gopikrishna Garmidi]

Introduce support for the CRD based on the Qualcomm Kalambo SoC. Similar
to Mahua, it is pin-to-pin compatible with the Glymur CRD. It reuses the
common CRD board description and drops the PMIC nodes not present on this
design.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile        |  1 +
 arch/arm64/boot/dts/qcom/kalambo-crd.dts | 21 +++++++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e05414290d8e..0ea4d6696aee 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9650-rdp488.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= kaanapali-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= kalambo-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk.dtb
 
 lemans-evk-camera-csi1-imx577-dtbs	:= lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo
diff --git a/arch/arm64/boot/dts/qcom/kalambo-crd.dts b/arch/arm64/boot/dts/qcom/kalambo-crd.dts
new file mode 100644
index 000000000000..b4441807f460
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/kalambo-crd.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "kalambo.dtsi"
+#include "glymur-crd.dtsi"
+
+/delete-node/ &pmcx0102_d_e0;
+/delete-node/ &pmcx0102_d0_thermal;
+/delete-node/ &pmh0104_i_e0;
+/delete-node/ &pmh0104_i0_thermal;
+/delete-node/ &pmh0104_j_e0;
+/delete-node/ &pmh0104_j0_thermal;
+
+/ {
+	model = "Qualcomm Technologies, Inc. Kalambo CRD";
+	compatible = "qcom,kalambo-crd", "qcom,kalambo";
+};

-- 
2.34.1

[PATCH v4 4/5] firmware: qcom: scm: Allow QSEECOM on Kalambo CRD

[Gopikrishna Garmidi]

Add Kalambo CRD board to the QSEECOM allowlist for enabling access to
efivars.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
---
 drivers/firmware/qcom/qcom_scm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index f35f2ee39130..d1cc6c908daa 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -2327,6 +2327,7 @@ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = {
 	{ .compatible = "microsoft,romulus15", },
 	{ .compatible = "qcom,glymur-crd" },
 	{ .compatible = "qcom,hamoa-iot-evk" },
+	{ .compatible = "qcom,kalambo-crd" },
 	{ .compatible = "qcom,mahua-crd" },
 	{ .compatible = "qcom,purwa-iot-evk" },
 	{ .compatible = "qcom,sc8180x-primus" },

-- 
2.34.1

[PATCH v4 5/5] soc: qcom: ubwc: Add Kalambo UBWC config

[Gopikrishna Garmidi]

Qualcomm Kalambo is a derivative of the Mahua SoC and shares the same
Universal Bandwidth Compression (UBWC) configuration. Add the Kalambo
compatible to the UBWC configuration table to enable support.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
---
 drivers/soc/qcom/ubwc_config.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/ubwc_config.c b/drivers/soc/qcom/ubwc_config.c
index 0209a02c390f..c5f79210ad52 100644
--- a/drivers/soc/qcom/ubwc_config.c
+++ b/drivers/soc/qcom/ubwc_config.c
@@ -112,6 +112,7 @@ static const struct of_device_id qcom_ubwc_configs[] __maybe_unused = {
 	{ .compatible = "qcom,eliza", .data = &ubwc_5_0_hbb15 },
 	{ .compatible = "qcom,glymur", .data = &glymur_data},
 	{ .compatible = "qcom,kaanapali", .data = &ubwc_6_0_hbb16 },
+	{ .compatible = "qcom,kalambo", .data = &glymur_data },
 	{ .compatible = "qcom,mahua", .data = &glymur_data },
 	{ .compatible = "qcom,milos", .data = &milos_data },
 	{ .compatible = "qcom,msm8226", .data = &no_ubwc_data },

-- 
2.34.1