[PATCH 0/2] hwmon: lm90: Fix DT channel constraints and reject unsupported channel 2

[PATCH 0/2] hwmon: lm90: Fix DT channel constraints and reject unsupported channel 2

[Flaviu Nistor]

The intention of this patch series is to fix DT channel constrains in the
dt-bindings and inprove the driver to reject unsupported channel 2.

dt-bindings:
Forbid temperature-offset-millicelsius on channel@0 (local sensor).
Rejecting of assigning temperature-offset-millicelsius for channel@0 is
already implemented in the driver.
Reject channel@2 for compatibles that have only one remote sensor.

driver:
If the sensor have only one remote channel, reject a possible unsupported
channel 2 and return an error, similar to miss-assigment of temperature
-offset-millicelsius property to channel@0.

Flaviu Nistor (2):
  dt-bindings: hwmon: national,lm90: Fix channel constraints for
    temperature offset
  hwmon: (lm90) Reject channel 2 on chips with only one remote sensor

 .../bindings/hwmon/national,lm90.yaml         | 29 +++++++++++++++++--
 drivers/hwmon/lm90.c                          |  5 ++++
 2 files changed, 31 insertions(+), 3 deletions(-)

-- 
2.34.1

[PATCH 1/2] dt-bindings: hwmon: national,lm90: Fix channel constraints for temperature offset

[Flaviu Nistor]

Limit temperature-offset-millicelsius to remote channels only, since
channel 0 is local and this property does not apply to it.
Channel 2 is only valid on devices with two remote sensors, so reject
channel 2 for compatibles that do not support a second remote channel.

Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
---
 .../bindings/hwmon/national,lm90.yaml         | 29 +++++++++++++++++--
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
index 164068ba069d..a7f82b202b86 100644
--- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -113,6 +113,29 @@ allOf:
       properties:
         ti,extended-range-enable: false
 
+  - patternProperties:
+      "channel@0":
+        type: object
+        properties:
+          temperature-offset-millicelsius: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,adt7481
+                - dallas,max6695
+                - dallas,max6696
+    then:
+      patternProperties:
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              enum: [0, 1]
+        "channel@2": false
+
   - if:
       properties:
         compatible:
@@ -149,7 +172,7 @@ allOf:
               - onnn,nct1008
     then:
       patternProperties:
-        "^channel@([0-2])$":
+        "^channel@([1-2])$":
           properties:
             temperature-offset-millicelsius:
               maximum: 127750
@@ -172,7 +195,7 @@ allOf:
               - winbond,w83l771
     then:
       patternProperties:
-        "^channel@([0-2])$":
+        "^channel@([1-2])$":
           properties:
             temperature-offset-millicelsius:
               maximum: 127875
@@ -186,7 +209,7 @@ allOf:
               - ti,tmp461
     then:
       patternProperties:
-        "^channel@([0-2])$":
+        "^channel@([1-2])$":
           properties:
             temperature-offset-millicelsius:
               maximum: 127937
-- 
2.34.1

[PATCH 2/2] hwmon: (lm90) Reject channel 2 on chips with only one remote sensor

[Flaviu Nistor]

Validate firmware channel definitions against chip capabilities and return
-EINVAL when channel 2 is configured on devices with 1 remote channel.

Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
---
 drivers/hwmon/lm90.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 1c603272538a..3faeb2c6ab01 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -2712,6 +2712,11 @@ static int lm90_probe_channel(struct i2c_client *client,
 		return -EINVAL;
 	}
 
+	if (id == 2 && !(data->flags & LM90_HAVE_TEMP3)) {
+		dev_err(dev, "channel %d is not supported for this chip in %pfw\n", id, child);
+		return -EINVAL;
+	}
+
 	err = fwnode_property_read_string(child, "label", &data->channel_label[id]);
 	if (err == -ENODATA || err == -EILSEQ) {
 		dev_err(dev, "invalid label property in %pfw\n", child);
-- 
2.34.1

Re: [PATCH 1/2] dt-bindings: hwmon: national,lm90: Fix channel constraints for temperature offset

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 2614 bytes --]

On Mon, Aug 24, 2026 at 09:38:59PM +0300, Flaviu Nistor wrote:
> Limit temperature-offset-millicelsius to remote channels only, since
> channel 0 is local and this property does not apply to it.
> Channel 2 is only valid on devices with two remote sensors, so reject
> channel 2 for compatibles that do not support a second remote channel.
> 
> Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
> ---
>  .../bindings/hwmon/national,lm90.yaml         | 29 +++++++++++++++++--
>  1 file changed, 26 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> index 164068ba069d..a7f82b202b86 100644
> --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> @@ -113,6 +113,29 @@ allOf:
>        properties:
>          ti,extended-range-enable: false
>  
> +  - patternProperties:
> +      "channel@0":
> +        type: object
> +        properties:
> +          temperature-offset-millicelsius: false

Instead of this, could the two if/then blocks below grow an else with
this instead? What you've got here is a bit abnormal.

Cheers,
Conor.

> +
> +  - if:
> +      not:
> +        properties:
> +          compatible:
> +            contains:
> +              enum:
> +                - adi,adt7481
> +                - dallas,max6695
> +                - dallas,max6696
> +    then:
> +      patternProperties:
> +        "^channel@[0-1]$":
> +          properties:
> +            reg:
> +              enum: [0, 1]
> +        "channel@2": false
> +
>    - if:
>        properties:
>          compatible:
> @@ -149,7 +172,7 @@ allOf:
>                - onnn,nct1008
>      then:
>        patternProperties:
> -        "^channel@([0-2])$":
> +        "^channel@([1-2])$":
>            properties:
>              temperature-offset-millicelsius:
>                maximum: 127750
> @@ -172,7 +195,7 @@ allOf:
>                - winbond,w83l771
>      then:
>        patternProperties:
> -        "^channel@([0-2])$":
> +        "^channel@([1-2])$":
>            properties:
>              temperature-offset-millicelsius:
>                maximum: 127875
> @@ -186,7 +209,7 @@ allOf:
>                - ti,tmp461
>      then:
>        patternProperties:
> -        "^channel@([0-2])$":
> +        "^channel@([1-2])$":
>            properties:
>              temperature-offset-millicelsius:
>                maximum: 127937
> -- 
> 2.34.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 1/2] dt-bindings: hwmon: national,lm90: Fix channel constraints for temperature offset

[Flaviu Nistor]

On Tue, Aug 25, 2026 at 7:58 PM, Conor Dooley wrote:
>On Mon, Aug 24, 2026 at 09:38:59PM +0300, Flaviu Nistor wrote:
>> Limit temperature-offset-millicelsius to remote channels only, since
>> channel 0 is local and this property does not apply to it.
>> Channel 2 is only valid on devices with two remote sensors, so reject
>> channel 2 for compatibles that do not support a second remote channel.
>>=20
>> Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
>> ---
>>  .../bindings/hwmon/national,lm90.yaml         | 29 +++++++++++++++++--
>>  1 file changed, 26 insertions(+), 3 deletions(-)
>>=20
>> diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b=
/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
>> index 164068ba069d..a7f82b202b86 100644
>> --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
>> +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
>> @@ -113,6 +113,29 @@ allOf:
>>        properties:
>>          ti,extended-range-enable: false
>> =20
>> +  - patternProperties:
>> +      "channel@0":
>> +        type: object
>> +        properties:
>> +          temperature-offset-millicelsius: false
>
>Instead of this, could the two if/then blocks below grow an else with
>this instead? What you've got here is a bit abnormal.
>
>Cheers,
>Conor.
>
Hello Conor, thanks for the suggestion. That makes perfect sense (don't know
why I haven't thought about it directly). I will send a v2.

Best regards,
Flaviu
>> +
>> +  - if:
>> +      not:
>> +        properties:
>> +          compatible:
>> +            contains:
>> +              enum:
>> +                - adi,adt7481
>> +                - dallas,max6695
>> +                - dallas,max6696
>> +    then:
>> +      patternProperties:
>> +        "^channel@[0-1]$":
>> +          properties:
>> +            reg:
>> +              enum: [0, 1]
>> +        "channel@2": false
>> +
>>    - if:
>>        properties:
>>          compatible:
>> @@ -149,7 +172,7 @@ allOf:
>>                - onnn,nct1008
>>      then:
>>        patternProperties:
>> -        "^channel@([0-2])$":
>> +        "^channel@([1-2])$":
>>            properties:
>>              temperature-offset-millicelsius:
>>                maximum: 127750
>> @@ -172,7 +195,7 @@ allOf:
>>                - winbond,w83l771
>>      then:
>>        patternProperties:
>> -        "^channel@([0-2])$":
>> +        "^channel@([1-2])$":
>>            properties:
>>              temperature-offset-millicelsius:
>>                maximum: 127875
>> @@ -186,7 +209,7 @@ allOf:
>>                - ti,tmp461
>>      then:
>>        patternProperties:
>> -        "^channel@([0-2])$":
>> +        "^channel@([1-2])$":
>>            properties:
>>              temperature-offset-millicelsius:
>>                maximum: 127937
>> --=20
>> 2.34.1
>>=20