* Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
2026-09-02 16:04 [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2) Catherine L
@ 2026-09-02 11:07 ` Paul Menzel
2026-09-02 13:24 ` L, Catherine
2026-09-02 15:17 ` Luiz Augusto von Dentz
0 siblings, 2 replies; 4+ messages in thread
From: Paul Menzel @ 2026-09-02 11:07 UTC (permalink / raw)
To: Catherine L; +Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel, kiran.k, L
Dear Catherine,
Thank you for your patch.
Am 02.09.26 um 18:04 schrieb Catherine L:
> From: "L, Catherine" <catherine.l@intel.com>
Please use the format without comma: Catherine L.
> $ lsusb
> Bus 003 Device 003: ID 8087:0043 Intel Corp.
>
> $ cat /sys/kernel/debug/usb/devices
> T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=8087 ProdID=0043 Rev= 0.00
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>
> Signed-off-by: L, Catherine <catherine.l@intel.com>
Ditto.
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 03039ceaa77d..a4fdf6549127 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
> { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
> + /* Otter Peak2, Wildcat Lake */
> + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
Please sort and put the comment on the same line as below.
> { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
> { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
> { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
Kind regards,
Paul
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
2026-09-02 11:07 ` Paul Menzel
@ 2026-09-02 13:24 ` L, Catherine
2026-09-02 15:17 ` Luiz Augusto von Dentz
1 sibling, 0 replies; 4+ messages in thread
From: L, Catherine @ 2026-09-02 13:24 UTC (permalink / raw)
To: Paul Menzel
Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel, K, Kiran, L
Hi Paul,
Thanks for the comments.
-----Original Message-----
From: Paul Menzel <pmenzel@molgen.mpg.de>
Sent: 02 September 2026 16:37
To: L, Catherine <catherine.l@intel.com>
Cc: marcel@holtmann.org; luiz.dentz@gmail.com; linux-bluetooth@vger.kernel.org; linux-kernel@vger.kernel.org; K, Kiran <kiran.k@intel.com>; L@web.codeaurora.org
Subject: Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
Dear Catherine,
Thank you for your patch.
Am 02.09.26 um 18:04 schrieb Catherine L:
> From: "L, Catherine" <catherine.l@intel.com>
Please use the format without comma: Catherine L.
Ack, Will change in v2 patch
> $ lsusb
> Bus 003 Device 003: ID 8087:0043 Intel Corp.
>
> $ cat /sys/kernel/debug/usb/devices
> T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=8087 ProdID=0043 Rev= 0.00
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>
> Signed-off-by: L, Catherine <catherine.l@intel.com>
Ditto.
Ack, Will change in v2 patch
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 03039ceaa77d..a4fdf6549127 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
> { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
> { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED
> },
> + /* Otter Peak2, Wildcat Lake */
> + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
Please sort and put the comment on the same line as below.
Ack, Will change in v2 patch
> { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
> { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
> { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
Kind regards,
Paul
Regards,
Catherine L
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
2026-09-02 11:07 ` Paul Menzel
2026-09-02 13:24 ` L, Catherine
@ 2026-09-02 15:17 ` Luiz Augusto von Dentz
1 sibling, 0 replies; 4+ messages in thread
From: Luiz Augusto von Dentz @ 2026-09-02 15:17 UTC (permalink / raw)
To: Paul Menzel
Cc: Catherine L, marcel, linux-bluetooth, linux-kernel, kiran.k, L
Hi Paul,
On Wed, Sep 2, 2026 at 7:07 AM Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>
> Dear Catherine,
>
>
> Thank you for your patch.
>
> Am 02.09.26 um 18:04 schrieb Catherine L:
> > From: "L, Catherine" <catherine.l@intel.com>
>
> Please use the format without comma: Catherine L.
>
> > $ lsusb
> > Bus 003 Device 003: ID 8087:0043 Intel Corp.
> >
> > $ cat /sys/kernel/debug/usb/devices
> > T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> > D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> > P: Vendor=8087 ProdID=0043 Rev= 0.00
> > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> >
> > Signed-off-by: L, Catherine <catherine.l@intel.com>
>
> Ditto.
>
> > ---
> > drivers/bluetooth/btusb.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 03039ceaa77d..a4fdf6549127 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
> > { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
> > { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
> > { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
> > + /* Otter Peak2, Wildcat Lake */
> > + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
>
> Please sort and put the comment on the same line as below.
That's not a good idea, we still have the 80-column limit for the
Bluetooth subsystem.
> > { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
> > { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
> > { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
>
>
> Kind regards,
>
> Paul
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
@ 2026-09-02 16:04 Catherine L
2026-09-02 11:07 ` Paul Menzel
0 siblings, 1 reply; 4+ messages in thread
From: Catherine L @ 2026-09-02 16:04 UTC (permalink / raw)
To: marcel, luiz.dentz, linux-bluetooth, linux-kernel
Cc: kiran.k, L, Catherine, L
From: "L, Catherine" <catherine.l@intel.com>
$ lsusb
Bus 003 Device 003: ID 8087:0043 Intel Corp.
$ cat /sys/kernel/debug/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0043 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
Signed-off-by: L, Catherine <catherine.l@intel.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 03039ceaa77d..a4fdf6549127 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
+ /* Otter Peak2, Wildcat Lake */
+ { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
--
2.43.0
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-09-02 15:17 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-09-02 16:04 [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2) Catherine L
2026-09-02 11:07 ` Paul Menzel
2026-09-02 13:24 ` L, Catherine
2026-09-02 15:17 ` Luiz Augusto von Dentz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®