From: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Suresh Vankadara <svankada@qti.qualcomm.com>,
Vikram Sharma <vikram.sharma@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
Subject: [PATCH 3/6] arm64: dts: qcom: glymur: Add camera MCLK pinctrl
Date: Mon, 07 Sep 2026 15:37:46 +0530 [thread overview]
Message-ID: <20260907-glymur_camss_dts-v1-3-6c2ced5ea5f9@oss.qualcomm.com> (raw)
In-Reply-To: <20260907-glymur_camss_dts-v1-0-6c2ced5ea5f9@oss.qualcomm.com>
Add pinctrl definitions for camera master clock pins on Glymur.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur.dtsi | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 4c48df593d1834a6ee7d97c9981965f557cad16c..ab1f742d0ecbce7268c76a4d3b398dfc518ef0ba 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -7090,6 +7090,41 @@ rx-pins {
};
};
+ cam_mclk0_default: cam-mclk0-default-state {
+ pins = "gpio96";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk1_default: cam-mclk1-default-state {
+ pins = "gpio97";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk2_default: cam-mclk2-default-state {
+ pins = "gpio98";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk3_default: cam-mclk3-default-state {
+ pins = "gpio99";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk4_default: cam-mclk4-default-state {
+ pins = "gpio100";
+ function = "cam_asc_mclk4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
cci0_0_default: cci0-0-default-state {
sda-pins {
pins = "gpio101";
--
2.34.1
next prev parent reply other threads:[~2026-09-07 10:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-07 10:07 [PATCH 0/6] Add CCI and CAMSS support for Glymur Nihal Kumar Gupta
2026-09-07 10:07 ` [PATCH 1/6] arm64: dts: qcom: glymur: Add CAMSS and CSIPHY nodes " Nihal Kumar Gupta
2026-09-14 14:10 ` Konrad Dybcio
2026-09-07 10:07 ` [PATCH 2/6] arm64: dts: qcom: glymur: Add CCI definitions " Nihal Kumar Gupta
2026-09-07 10:47 ` Abel Vesa
2026-09-07 10:07 ` Nihal Kumar Gupta [this message]
2026-09-07 10:47 ` [PATCH 3/6] arm64: dts: qcom: glymur: Add camera MCLK pinctrl Abel Vesa
2026-09-07 10:07 ` [PATCH 4/6] arm64: dts: qcom: glymur-crd: Add PM8010 camera PMIC Nihal Kumar Gupta
2026-09-07 10:07 ` [PATCH 5/6] arm64: dts: qcom: glymur-crd: Add ov08x40 RGB sensor on CSIPHY4 Nihal Kumar Gupta
2026-09-07 10:47 ` Abel Vesa
2026-09-07 10:07 ` [PATCH 6/6] arm64: defconfig: Enable OV08X40 camera sensor driver Nihal Kumar Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260907-glymur_camss_dts-v1-3-6c2ced5ea5f9@oss.qualcomm.com \
--to=nihal.gupta@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=svankada@qti.qualcomm.com \
--cc=vikram.sharma@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®