[PATCH v4 00/15] MMC pinmux configuration fixes

[PATCH v4 00/15] MMC pinmux configuration fixes

[Judith Mendez]

This series fixes MMC pin input/output and pullup/pulldown settings
across AM62*, AM62AX, and AM62LX boards.

All patches have been tested on their appropriate SK & EVM boards.
BeaglePlay and Pocketbeagle boards have also been tested.

Changes since v3:
- Include PIN_OUTPUT fixes for missing third-party boards as per Sashiko
  review [0]
- Split out squashed patches into separate commits as per Nishanth's
  review [1]

[0] https://lore.kernel.org/linux-devicetree/20260805230256.41AA61F000E9@smtp.kernel.org/
    & https://lore.kernel.org/linux-devicetree/20260805230614.521AC1F000E9@smtp.kernel.org/
[1] https://lore.kernel.org/linux-devicetree/20260904151335.fi5mvjpvziw2g3r2@exemption/

Link to v1:
https://lore.kernel.org/linux-devicetree/20260729195958.671147-1-jm@ti.com/
Link to v2:
https://lore.kernel.org/linux-devicetree/20260805004821.416613-1-jm@ti.com/
Link to v3:
https://lore.kernel.org/linux-devicetree/20260805225438.464184-1-jm@ti.com/

Judith Mendez (15):
  arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address
  arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for
    MMC0
  arm64: dts: ti: k3-am62a7-sk: Set eMMC clock pin as OUTPUT
  arm64: dts: ti: k3-am62a7-sk: Set SD clock pin as OUTPUT
  arm64: dts: ti: k3-am62a-phycore-som: Set eMMC clock pin as OUTPUT
  arm64: dts: ti: k3-am62-lp-sk: Set eMMC clock pins as OUTPUT
  arm64: dts: ti: k3-am62-pocketbeagle2: Set SD clock pin as OUTPUT
  arm64: dts: ti: k3-am625-beagleplay: Set MMC clock pins as OUTPUT
  arm64: dts: ti: k3-am62x-sk-common: Set SD clock pin as OUTPUT
  arm64: dts: ti: k3-am625-sk-common: Set eMMC clock pin as OUTPUT
  arm64: dts: ti: k3-am62-phycore-som: Set eMMC clock pin as OUTPUT
  arm64: dts: ti: k3-am625-tqma62xx: Set MMC clock pins as OUTPUT
  arm64: dts: ti: k3-am625-var-som-symphony: Set SD clock pins as OUTPUT
  arm64: dts: ti: k3-am625-var-som: Set MMC clock pins as OUTPUT
  arm64: dts: ti: k3-am62x-phyboard-lyra: Set SD clock pin as OUTPUT

 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts             | 2 +-
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi      | 2 +-
 arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts     | 2 +-
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts       | 6 +++---
 arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi       | 2 +-
 arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts | 4 ++--
 arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi        | 2 +-
 arch/arm64/boot/dts/ti/k3-am625-var-som-symphony.dts | 2 +-
 arch/arm64/boot/dts/ti/k3-am625-var-som.dtsi         | 4 ++--
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi     | 2 +-
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts              | 5 ++---
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts             | 4 ++--
 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi   | 2 +-
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi       | 2 +-
 14 files changed, 20 insertions(+), 21 deletions(-)

-- 
2.34.1

[PATCH v4 01/15] arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address

[Judith Mendez]

MMC0_CLKLB and MMC0_CLK have incorrectly swapped register addresses
as per datasheet [0]. Set the correct MMC0_CLK address and drop the
unneeded MMC0_CLKLB pin configuration.

[0] https://www.ti.com/lit/gpn/am62a7 Rev. E: Table 5-1. Pin Attributes

Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index d3b3675e7a8fc..b04636cab71c7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -328,8 +328,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
 	main_mmc0_pins_default: main-mmc0-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
-			AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
 			AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
 			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
 			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
-- 
2.34.1

Re: [PATCH v4 01/15] arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address

[Kumar, Udit]

On 9/10/2026 3:17 AM, Judith Mendez wrote:
> MMC0_CLKLB and MMC0_CLK have incorrectly swapped register addresses
> as per datasheet [0]. Set the correct MMC0_CLK address and drop the
> unneeded MMC0_CLKLB pin configuration.
> 
> [0] https://www.ti.com/lit/gpn/am62a7 Rev. E: Table 5-1. Pin Attributes
> 
> Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Judith Mendez <jm@ti.com>
> Reviewed-by: Moteen Shah <m-shah@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index d3b3675e7a8fc..b04636cab71c7 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -328,8 +328,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
>  	main_mmc0_pins_default: main-mmc0-default-pins {
>  		pinctrl-single,pins = <
>  			AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
> -			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
> -			AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
> +			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */

Shouldn't be MMC0_CLK be o/p, instead of  PIN_INPUT
Similar to patch [0]
[0] https://lore.kernel.org/all/20260909214743.899477-4-jm@ti.com/



>  			AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
>  			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
>  			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */

Re: [PATCH v4 01/15] arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address

[Judith Mendez]

Hi Udit,

On 9/11/26 2:57 AM, Kumar, Udit wrote:
> 
> 
> On 9/10/2026 3:17 AM, Judith Mendez wrote:
>> MMC0_CLKLB and MMC0_CLK have incorrectly swapped register addresses
>> as per datasheet [0]. Set the correct MMC0_CLK address and drop the
>> unneeded MMC0_CLKLB pin configuration.
>>
>> [0] https://www.ti.com/lit/gpn/am62a7 Rev. E: Table 5-1. Pin Attributes
>>
>> Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support")
>> Cc: <stable@vger.kernel.org>
>> Signed-off-by: Judith Mendez <jm@ti.com>
>> Reviewed-by: Moteen Shah <m-shah@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 3 +--
>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> index d3b3675e7a8fc..b04636cab71c7 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> @@ -328,8 +328,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
>>   	main_mmc0_pins_default: main-mmc0-default-pins {
>>   		pinctrl-single,pins = <
>>   			AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
>> -			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */
>> -			AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
>> +			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
> 
> Shouldn't be MMC0_CLK be o/p, instead of  PIN_INPUT
> Similar to patch [0]
> [0] https://lore.kernel.org/all/20260909214743.899477-4-jm@ti.com/

Yes it should, and it is in the same series as  you pointed out. This
current patch only fixes register address as per commit description. (:

~ Judith

> 
> 
> 
>>   			AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
>>   			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
>>   			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
> 

[PATCH v4 02/15] arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for MMC0

[Judith Mendez]

AM62L EVM has external pullups on MMC0 CMD and D0 pins [0]. Remove
internal pullups considering:
- Internal pullups are not required, without internal pullups, RDAT and
  RCMD values of 47K are within spec
- having both pullups (stronger pull) results in unnecessary power
  consumption

[0] https://www.ti.com/lit/zip/SPRCAL6

Fixes: 00fb4c73b67d ("arm64: dts: ti: k3-am62l: add initial reference board file")
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
index 84a0cfaaf196a..964387eb51788 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
@@ -253,9 +253,9 @@ AM62LX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D8) I2C2_SDA */
 
 	mmc0_pins_default: mmc0-default-pins {
 		pinctrl-single,pins = <
-			AM62LX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (D2) MMC0_CMD */
+			AM62LX_IOPAD(0x0214, PIN_INPUT, 0) /* (D2) MMC0_CMD */
 			AM62LX_IOPAD(0x020c, PIN_OUTPUT, 0) /* (B2) MMC0_CLK */
-			AM62LX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (D3) MMC0_DAT0 */
+			AM62LX_IOPAD(0x0208, PIN_INPUT, 0) /* (D3) MMC0_DAT0 */
 			AM62LX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (D4) MMC0_DAT1 */
 			AM62LX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (C1) MMC0_DAT2 */
 			AM62LX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (C2) MMC0_DAT3 */
-- 
2.34.1

[PATCH v4 03/15] arm64: dts: ti: k3-am62a7-sk: Set eMMC clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruj16 Rev. C: Table 12-257. MMCSDi I/O Signals

Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index b04636cab71c7..f6778f9798d40 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -328,7 +328,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
 	main_mmc0_pins_default: main-mmc0-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62AX_IOPAD(0x218, PIN_OUTPUT, 0) /* (AB1) MMC0_CLK */
 			AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
 			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
 			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
-- 
2.34.1

[PATCH v4 04/15] arm64: dts: ti: k3-am62a7-sk: Set SD clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruj16 Rev. C: Table 12-257. MMCSDi I/O Signals

Fixes: 38c4a08c820c ("arm64: dts: ti: Add support for AM62A7-SK")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f6778f9798d40..e63c5200a2370 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -344,7 +344,7 @@ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
-			AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62AX_IOPAD(0x234, PIN_OUTPUT, 0) /* (B22) MMC1_CLK */
 			AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
 			AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
 			AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
-- 
2.34.1

[PATCH v4 05/15] arm64: dts: ti: k3-am62a-phycore-som: Set eMMC clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruj16 Rev. C: Table 12-257. MMCSDi I/O Signals

Fixes: d69383885576 ("arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM62Ax")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index de4048a3564bc..5ad93be3d3363 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -120,7 +120,7 @@ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
 	main_mmc0_pins_default: main-mmc0-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
-			AM62AX_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */
+			AM62AX_IOPAD(0x218, PIN_OUTPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */
 			AM62AX_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
 			AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
 			AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
-- 
2.34.1

[PATCH v4 06/15] arm64: dts: ti: k3-am62-lp-sk: Set eMMC clock pins as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: e6a51ffabfc1 ("arm64: ti: dts: Add support for AM62x LP SK")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index dfd65c00f5b95..7fd508f4eddf1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -86,7 +86,7 @@ main_mmc0_pins_default: main-mmc0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */
+			AM62X_IOPAD(0x218, PIN_OUTPUT, 0) /* (Y1) MMC0_CLK */
 			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */
 			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (V1) MMC0_DAT1 */
 			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (W2) MMC0_DAT2 */
-- 
2.34.1

[PATCH v4 07/15] arm64: dts: ti: k3-am62-pocketbeagle2: Set SD clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: 92d8c028aa92 ("arm64: dts: ti: Add k3-am62-pocketbeagle2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
index 7a4cffc27bda3..1c691629d4ad0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -235,7 +235,7 @@ AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
-			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
+			AM62X_IOPAD(0x234, PIN_OUTPUT, 0) /* (B22/A20) MMC1_CLK */
 			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
 			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
 			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
-- 
2.34.1

[PATCH v4 08/15] arm64: dts: ti: k3-am625-beagleplay: Set MMC clock pins as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: f5a731f0787f ("arm64: dts: ti: Add k3-am625-beagleplay")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index c468b9c5fc09a..898e4ca3fd87e 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -323,7 +323,7 @@ emmc_pins_default: emmc-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB1) MMC0_CLK */
 			AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
 			AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
 			AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
@@ -346,7 +346,7 @@ sd_pins_default: sd-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
-			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (B22) MMC1_CLK */
 			AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
 			AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
 			AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
@@ -358,7 +358,7 @@ AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
 	wifi_pins_default: wifi-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
-			AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
+			AM62X_IOPAD(0x0118, PIN_OUTPUT, 0) /* (D25) MMC2_CLK */
 			AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
 			AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
 			AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
-- 
2.34.1

[PATCH v4 09/15] arm64: dts: ti: k3-am62x-sk-common: Set SD clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index ab9e58c2d225e..d2f41e2ed6239 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -194,7 +194,7 @@ main_mmc1_pins_default: main-mmc1-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
-			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
+			AM62X_IOPAD(0x234, PIN_OUTPUT, 0) /* (B22/A20) MMC1_CLK */
 			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
 			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
 			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
-- 
2.34.1

[PATCH v4 10/15] arm64: dts: ti: k3-am625-sk-common: Set eMMC clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
index 9c83626826453..085b067d96fbb 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
@@ -98,7 +98,7 @@ main_mmc0_pins_default: main-mmc0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x218, PIN_OUTPUT, 0) /* (AB1) MMC0_CLK */
 			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
 			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
 			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
-- 
2.34.1

[PATCH v4 11/15] arm64: dts: ti: k3-am62-phycore-som: Set eMMC clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: 3443c1c4ed61 ("arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 3baa653257bb6..ce3e5165bd310 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -153,7 +153,7 @@ AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
 	main_mmc0_pins_default: main-mmc0-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x218, PIN_OUTPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */
 			AM62X_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA2) MMC0_DAT0 */
 			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
 			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
-- 
2.34.1

[PATCH v4 12/15] arm64: dts: ti: k3-am625-tqma62xx: Set MMC clock pins as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: 5b36d8c72c91 ("arm64: dts: ti: Add TQ-Systems TQMa62xx SoM and MBa62xx carrier board Device Trees")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts | 4 ++--
 arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi        | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts
index efc00d2a860a7..3859512c42628 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts
@@ -735,7 +735,7 @@ main_mmc1_pins: main-mmc1-pins {
 			/* (A21) MMC1_CMD */
 			AM62X_IOPAD(0x23c, PIN_INPUT, 0)
 			/* (B22) MMC1_CLK */
-			AM62X_IOPAD(0x234, PIN_INPUT, 0)
+			AM62X_IOPAD(0x234, PIN_OUTPUT, 0)
 			/* (A22) MMC1_DAT0 */
 			AM62X_IOPAD(0x230, PIN_INPUT, 0)
 			/* (B21) MMC1_DAT1 */
@@ -755,7 +755,7 @@ main_mmc2_pins: main-mmc2-pins {
 			/* (C24) MMC2_CMD */
 			AM62X_IOPAD(0x120, PIN_INPUT, 0)
 			/* (D25) MMC2_CLK */
-			AM62X_IOPAD(0x118, PIN_INPUT, 0)
+			AM62X_IOPAD(0x118, PIN_OUTPUT, 0)
 			/* (B24) MMC2_DAT0 */
 			AM62X_IOPAD(0x114, PIN_INPUT, 0)
 			/* (C25) MMC2_DAT1 */
diff --git a/arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi
index 72288678cd01f..a200a2afe16fa 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi
@@ -299,7 +299,7 @@ main_mmc0_pins: main-mmc0-pins {
 			/* (Y3) MMC0_CMD */
 			AM62X_IOPAD(0x220, PIN_INPUT, 0)
 			/* (AB1) MMC0_CLK */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0)
+			AM62X_IOPAD(0x218, PIN_OUTPUT, 0)
 			/* (AA2) MMC0_DAT0 */
 			AM62X_IOPAD(0x214, PIN_INPUT, 0)
 			/* (AA1) MMC0_DAT1 */
-- 
2.34.1

[PATCH v4 13/15] arm64: dts: ti: k3-am625-var-som-symphony: Set SD clock pins as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: acb4cd35dbd2 ("arm64: dts: ti: var-som-am62: Add support for Variscite Symphony Board")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-var-som-symphony.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-var-som-symphony.dts b/arch/arm64/boot/dts/ti/k3-am625-var-som-symphony.dts
index 7951d7ec952b5..082bf81143dcb 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-var-som-symphony.dts
@@ -391,7 +391,7 @@ pinctrl_mmc1: main-mmc1-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
-			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x234, PIN_OUTPUT, 0) /* (B22) MMC1_CLK */
 			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
 			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
 			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
-- 
2.34.1

[PATCH v4 14/15] arm64: dts: ti: k3-am625-var-som: Set MMC clock pins as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: 887d9e03c487 ("arm64: dts: ti: Add support for Variscite VAR-SOM-AM62")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-var-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am625-var-som.dtsi
index c2daa56c35e17..c23b6a90b8b13 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-var-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am625-var-som.dtsi
@@ -277,7 +277,7 @@ pinctrl_mmc0: main-mmc0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x218, PIN_OUTPUT, 0) /* (AB1) MMC0_CLK */
 			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
 			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
 			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
@@ -292,7 +292,7 @@ AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
 	pinctrl_mmc2: main-mmc2-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x120, PIN_INPUT_PULLUP, 0) /* (C24) MMC2_CMD */
-			AM62X_IOPAD(0x118, PIN_INPUT_PULLDOWN, 0) /* (D25) MMC2_CLK */
+			AM62X_IOPAD(0x118, PIN_OUTPUT_PULLDOWN, 0) /* (D25) MMC2_CLK */
 			AM62X_IOPAD(0x114, PIN_INPUT_PULLUP, 0) /* (B24) MMC2_DAT0 */
 			AM62X_IOPAD(0x110, PIN_INPUT_PULLUP, 0) /* (C25) MMC2_DAT1 */
 			AM62X_IOPAD(0x10c, PIN_INPUT_PULLUP, 0) /* (E23) MMC2_DAT2 */
-- 
2.34.1

[PATCH v4 15/15] arm64: dts: ti: k3-am62x-phyboard-lyra: Set SD clock pin as OUTPUT

[Judith Mendez]

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: f1b3adade045 ("arm64: dts: ti: Add am62x-phyboard-lyra carrier board")
Cc: <stable@vger.kernel.org>
Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
index d6e70ee15938e..c9b3e0518faf5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
@@ -227,7 +227,7 @@ AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
-			AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x234, PIN_OUTPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
 			AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
 			AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
 			AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
-- 
2.34.1