From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/9] arm64: dts: qcom: shikra-cqm-evk: Enable sound card support
Date: Fri, 11 Sep 2026 04:46:39 +0530 [thread overview]
Message-ID: <20260910231642.1794948-7-mohammad.rafi.shaik@oss.qualcomm.com> (raw)
In-Reply-To: <20260910231642.1794948-1-mohammad.rafi.shaik@oss.qualcomm.com>
Enable the sound card on the shikra-cqm-evk platform, including
the PM4125 (Rouleur) headset codec, WSA885x external speaker path,
and QAIF backend links.
Also enable the required LPASS macro and SoundWire nodes, along with
the necessary pinctrl configurations for DMIC and I2S interfaces.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 185 +++++++++++++++++++
arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi | 5 +
2 files changed, 190 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
index 6b963df6f1eb..a66608d75309 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
@@ -21,6 +21,110 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ sound: sound {
+ compatible = "qcom,shikra-cqm-sndcard";
+ model = "shikra-cqm-evk";
+
+ audio-routing = "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "AMIC3", "MIC BIAS3",
+ "VA SWR_INPUT0", "ADC1_OUTPUT",
+ "VA SWR_INPUT1", "ADC2_OUTPUT",
+ "VA DMIC0", "vdd-micb",
+ "VA DMIC1", "vdd-micb",
+ "VA DMIC2", "vdd-micb",
+ "VA DMIC3", "vdd-micb";
+
+ pinctrl-0 = <&i2s2_default>, <&dmic_eldo_en_default>;
+ pinctrl-names = "default";
+
+ headset-capture-dai-link {
+ link-name = "Headphones Capture";
+
+ codec {
+ sound-dai = <&pmic4125_codec 1>,
+ <&swr1 0>,
+ <&vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&qaif_cpu VA_CODEC_DMA_TX_1>;
+ };
+ };
+
+ headset-playback-dai-link {
+ link-name = "Headphones Playback";
+
+ codec {
+ sound-dai = <&pmic4125_codec 0>,
+ <&swr0 0>,
+ <&rxmacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&qaif_cpu RX_CODEC_DMA_RX_1>;
+ };
+ };
+
+ wsa-speaker-dai-link {
+ link-name = "WSA Speaker Playback";
+
+ codec {
+ sound-dai = <&wsa8855>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ dai-tdm-slot-rx-mask = <1 1>;
+ };
+
+ cpu {
+ sound-dai = <&qaif_cpu AIF_TDM_RX_2>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ dai-tdm-slot-rx-mask = <1 1>;
+ dai-tdm-slot-tx-mask = <1 1>;
+ };
+ };
+
+ va-dmic-dai-link {
+ link-name = "VA DMIC Capture";
+
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&qaif_cpu VA_CODEC_DMA_TX_0>;
+ };
+ };
+ };
+};
+
+&gpr {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "okay";
+
+ wsa8855: speaker@c {
+ compatible = "qcom,wsa8855";
+ reg = <0x0c>;
+
+ pinctrl-0 = <&wsa8855_spkr_sd_n>;
+ pinctrl-names = "default";
+
+ powerdown-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+ vdd-1p8-supply = <&pm4125_l15>;
+ vdd-io-supply = <&pm4125_l15>;
+ qcom,battery-config = "1s";
+
+ #sound-dai-cells = <0>;
+ };
};
&remoteproc_cdsp {
@@ -42,6 +146,10 @@ &remoteproc_mpss {
status = "okay";
};
+&rxmacro {
+ status = "okay";
+};
+
&audiocorecc {
status = "okay";
};
@@ -61,3 +169,80 @@ &sdhc_1 {
status = "okay";
};
+
+&spmi_bus {
+ pmic@0 {
+ pmic4125_codec: audio-codec@f000 {
+ compatible = "qcom,pm4125-codec";
+ reg = <0xf000>;
+ vdd-io-supply = <&pm4125_l15>;
+ vdd-cp-supply = <&pm4125_s1>;
+ vdd-pa-vpos-supply = <&pm4125_s1>;
+
+ vdd-mic-bias-supply = <&pm4125_l22>;
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+
+ qcom,rx-device = <&pm4125_rx>;
+ qcom,tx-device = <&pm4125_tx>;
+ #sound-dai-cells = <1>;
+
+ status = "okay";
+ };
+ };
+};
+
+&swr0 {
+ status = "okay";
+
+ pm4125_rx: codec@0,4 {
+ compatible = "sdw20217010c00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ pm4125_tx: codec@0,3 {
+ compatible = "sdw20217010c00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 3>;
+ };
+};
+
+&tlmm {
+ dmic_eldo_en_default: dmic-eldo-default-active-state {
+ pins = "gpio71";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ i2s2_default: i2s2-default-active-state {
+ pins = "gpio100", "gpio101", "gpio102", "gpio103";
+ function = "i2s2";
+ drive-strength = <8>;
+ output-high;
+ bias-disable;
+ };
+
+ wsa8855_spkr_sd_n: wsa8855-spkr-sd-n-active-state {
+ pins = "gpio2";
+ function = "gpio";
+ input-disable;
+ output-enable;
+ };
+};
+
+&vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>, <&tx_swr_active>;
+ pinctrl-names = "default";
+
+ qcom,dmic-sample-rate = <4800000>;
+ status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi b/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
index fde7fc035bf5..a48143ca5ef5 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi
@@ -93,6 +93,11 @@ &rpm_requests {
regulators {
compatible = "qcom,rpm-pm2250-regulators";
+ pm4125_s1: s1 {
+ regulator-min-microvolt = <1396000>;
+ regulator-max-microvolt = <1396000>;
+ };
+
pm4125_s2: s2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
--
2.34.1
next prev parent reply other threads:[~2026-09-10 23:17 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 23:16 [PATCH v2 0/9] arm64: dts: qcom: shikra: Enable audio on EVK boards Mohammad Rafi Shaik
2026-09-10 23:16 ` [PATCH v2 1/9] ASoC: dt-bindings: qcom,apr: Add modem_apps GLINK channel for shikra Mohammad Rafi Shaik
2026-09-10 23:16 ` [PATCH v2 2/9] dt-bindings: sound: qcom,lpass-va-macro: Add clock constraints " Mohammad Rafi Shaik
2026-09-10 23:17 ` Mark Brown
2026-09-10 23:16 ` [PATCH v2 3/9] arm64: dts: qcom: shikra: Add QAIF CPU node for audio Mohammad Rafi Shaik
2026-09-22 15:57 ` Konrad Dybcio
2026-09-10 23:16 ` [PATCH v2 4/9] arm64: dts: qcom: shikra: Add gpr node Mohammad Rafi Shaik
2026-09-22 16:01 ` Konrad Dybcio
2026-09-10 23:16 ` [PATCH v2 5/9] arm64: dts: qcom: shikra: Add soundwire and macro nodes Mohammad Rafi Shaik
2026-09-22 16:00 ` Konrad Dybcio
2026-09-10 23:16 ` Mohammad Rafi Shaik [this message]
2026-09-22 16:56 ` [PATCH v2 6/9] arm64: dts: qcom: shikra-cqm-evk: Enable sound card support Konrad Dybcio
2026-09-10 23:16 ` [PATCH v2 7/9] arm64: dts: qcom: shikra-cqs-evk: " Mohammad Rafi Shaik
2026-09-10 23:16 ` [PATCH v2 8/9] arm64: dts: qcom: shikra-iqs-evk: " Mohammad Rafi Shaik
2026-09-10 23:16 ` [PATCH v2 9/9] arm64: defconfig: Enable Qualcomm PM4125 and WSA885X drivers Mohammad Rafi Shaik
2026-09-11 8:56 ` Krzysztof Kozlowski
2026-09-15 15:49 ` Mohammad Rafi Shaik
2026-09-11 14:05 ` [PATCH v2 0/9] arm64: dts: qcom: shikra: Enable audio on EVK boards Mark Brown
2026-09-11 14:18 ` Konrad Dybcio
2026-09-15 13:22 ` Mohammad Rafi Shaik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910231642.1794948-7-mohammad.rafi.shaik@oss.qualcomm.com \
--to=mohammad.rafi.shaik@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®