From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Subject: [PATCH v2 8/9] arm64: dts: qcom: shikra-iqs-evk: Enable sound card support
Date: Fri, 11 Sep 2026 04:46:41 +0530 [thread overview]
Message-ID: <20260910231642.1794948-9-mohammad.rafi.shaik@oss.qualcomm.com> (raw)
In-Reply-To: <20260910231642.1794948-1-mohammad.rafi.shaik@oss.qualcomm.com>
Enable the IQS EVK audio card using MAX98091 on I2S0 for primary
playback/capture and VA DMIC capture through q6apm backend links.
Add board clock and pinctrl states required for codec IRQ, external
mclk and digital mic routing.
Co-developed-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 144 ++++++++++++++++++++
1 file changed, 144 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
index 727809430fd1..69b0c34ec9c4 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
@@ -21,6 +21,105 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ sound {
+ compatible = "qcom,shikra-iqs-sndcard";
+ model = "shikra-iqs-evk";
+
+ pinctrl-0 = <&i2s0_default>, <&ext_mclk2_active>;
+ pinctrl-names = "default";
+
+ audio-routing = "IN34", "Headset Mic",
+ "Headset Mic", "MICBIAS",
+ "DMICL", "Int Mic",
+ "Int Mic", "MICBIAS",
+ "Headphone", "HPL",
+ "Headphone", "HPR",
+ "Speaker", "SPKL",
+ "Speaker", "SPKR",
+ "VA DMIC0", "vdd-micb",
+ "VA DMIC1", "vdd-micb",
+ "VA DMIC2", "vdd-micb",
+ "VA DMIC3", "vdd-micb";
+
+ pri-i2s-playback-dai-link {
+ link-name = "Analog Playback";
+
+ codec {
+ sound-dai = <&max98091>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ pri-i2s-capture-dai-link {
+ link-name = "Analog Capture";
+
+ codec {
+ sound-dai = <&max98091>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai PRIMARY_MI2S_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dmic-dai-link {
+ link-name = "VA DMIC Capture";
+
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ max98091: audio-codec@10 {
+ compatible = "maxim,max98091";
+ reg = <0x10>;
+
+ pinctrl-0 = <&max98091_default>;
+ pinctrl-names = "default";
+
+ interrupts-extended = <&tlmm 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "mclk";
+ assigned-clocks = <&q6prmcc LPASS_CLK_ID_MCLK_2 LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&q6apmbedai {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
+ clocks = <&q6prmcc LPASS_CLK_ID_QAIF_IF0_IBIT LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "bclk";
+ };
};
&remoteproc_cdsp {
@@ -57,3 +156,48 @@ &sdhc_1 {
status = "okay";
};
+
+&tlmm {
+ dmic_eldo_en_default: dmic-eldo-default-active-state {
+ pins = "gpio71";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ output-high;
+ };
+
+ ext_mclk2_active: ext-mclk2-state {
+ pins = "gpio110";
+ function = "ext_mclk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ i2s0_default: i2s0-default-active-state {
+ pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109";
+ function = "i2s0";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ max98091_default: max98091-default-state {
+ pins = "gpio28";
+ function = "gpio";
+ bias-pull-up;
+ };
+};
+
+&vamacro {
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "mclk",
+ "npl";
+
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>, <&dmic_eldo_en_default>;
+ pinctrl-names = "default";
+
+ qcom,dmic-sample-rate = <4800000>;
+
+ status = "okay";
+};
+
--
2.34.1
next prev parent reply other threads:[~2026-09-10 23:17 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 23:16 [PATCH v2 0/9] arm64: dts: qcom: shikra: Enable audio on EVK boards Mohammad Rafi Shaik
2026-09-10 23:16 ` [PATCH v2 1/9] ASoC: dt-bindings: qcom,apr: Add modem_apps GLINK channel for shikra Mohammad Rafi Shaik
2026-09-10 23:16 ` [PATCH v2 2/9] dt-bindings: sound: qcom,lpass-va-macro: Add clock constraints " Mohammad Rafi Shaik
2026-09-10 23:17 ` Mark Brown
2026-09-10 23:16 ` [PATCH v2 3/9] arm64: dts: qcom: shikra: Add QAIF CPU node for audio Mohammad Rafi Shaik
2026-09-22 15:57 ` Konrad Dybcio
2026-09-10 23:16 ` [PATCH v2 4/9] arm64: dts: qcom: shikra: Add gpr node Mohammad Rafi Shaik
2026-09-22 16:01 ` Konrad Dybcio
2026-09-10 23:16 ` [PATCH v2 5/9] arm64: dts: qcom: shikra: Add soundwire and macro nodes Mohammad Rafi Shaik
2026-09-22 16:00 ` Konrad Dybcio
2026-09-10 23:16 ` [PATCH v2 6/9] arm64: dts: qcom: shikra-cqm-evk: Enable sound card support Mohammad Rafi Shaik
2026-09-22 16:56 ` Konrad Dybcio
2026-09-10 23:16 ` [PATCH v2 7/9] arm64: dts: qcom: shikra-cqs-evk: " Mohammad Rafi Shaik
2026-09-10 23:16 ` Mohammad Rafi Shaik [this message]
2026-09-10 23:16 ` [PATCH v2 9/9] arm64: defconfig: Enable Qualcomm PM4125 and WSA885X drivers Mohammad Rafi Shaik
2026-09-11 8:56 ` Krzysztof Kozlowski
2026-09-15 15:49 ` Mohammad Rafi Shaik
2026-09-11 14:05 ` [PATCH v2 0/9] arm64: dts: qcom: shikra: Enable audio on EVK boards Mark Brown
2026-09-11 14:18 ` Konrad Dybcio
2026-09-15 13:22 ` Mohammad Rafi Shaik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260910231642.1794948-9-mohammad.rafi.shaik@oss.qualcomm.com \
--to=mohammad.rafi.shaik@oss.qualcomm.com \
--cc=ajay.nandam@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®