[PATCH v2 08/15] arm64: dts: qcom: sm8250: Move PCIe phy and GPIOs to root port node

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe phy reference and the perst/wake GPIO properties are
per root port and belong in the root port node (pcie@0), not in the
RC controller node. Move phys, phy-names, perst-gpios, and wake-gpios
from the controller to the existing pcieport0 and newly labeled
pcie1_port0 and pcie2_port0, allowing board-level overrides. Rename
perst-gpios to reset-gpios to match the binding used in the root
port context.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 30 ++++++++++++------------------
 1 file changed, 12 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e0c357222bc7..caabd201c0d9 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2207,12 +2207,6 @@ pcie0: pcie@1c00000 {
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
-
-			perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 81 GPIO_ACTIVE_LOW>;
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
 			dma-coherent;
@@ -2224,6 +2218,10 @@ pcieport0: pcie@0 {
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie0_phy>;
+				reset-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+				wake-gpios = <&tlmm 81 GPIO_ACTIVE_LOW>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
@@ -2334,12 +2332,6 @@ pcie1: pcie@1c08000 {
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
-			perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
 			dma-coherent;
@@ -2351,6 +2343,10 @@ pcie@0 {
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie1_phy>;
+				reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+				wake-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
@@ -2461,12 +2457,6 @@ pcie2: pcie@1c10000 {
 
 			power-domains = <&gcc PCIE_2_GDSC>;
 
-			phys = <&pcie2_phy>;
-			phy-names = "pciephy";
-
-			perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
-			wake-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie2_default_state>;
 			dma-coherent;
@@ -2478,6 +2468,10 @@ pcie@0 {
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
 
+				phys = <&pcie2_phy>;
+				reset-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+				wake-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;

-- 
2.34.1