From: Jared Wuerzburger <jwuerz@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>,
Lorenzo Bianconi <lorenzo@kernel.org>
Cc: "David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
"Samuel Dionne-Riel" <samuel@dionne-riel.com>,
"Jared Wuerzburger" <jwuerz@gmail.com>
Subject: [PATCH v3 2/2] iio: imu: st_lsm6dsx: Add ACPI ID SMOCF05 for LSM6DS3TR-C
Date: Sun, 27 Sep 2026 17:05:59 -0500 [thread overview]
Message-ID: <20260927220559.24169-3-jwuerz@gmail.com> (raw)
In-Reply-To: <20260927220559.24169-1-jwuerz@gmail.com>
From: Samuel Dionne-Riel <samuel@dionne-riel.com>
The Minisforum V3 and V3 SE tablets declare their ST LSM6DS3TR-C IMU in
the DSDT with the hardware ID SMOCF05 instead of SMO8B30, so the driver
never binds and the accelerometer and gyroscope are missing. The
Windows driver (version 1.0.4.3) binds the LSM6DS3TR-C to both IDs.
Relevant part of the DSDT, identical on both models (full excerpt in
the cover letter):
Scope (_SB.I2CD) { Device (STS) {
Name (_HID, EisaId ("SMOCF05"))
Name (_CID, EisaId ("SMOCF05"))
_CRS: I2cSerialBusV2 (0x006A, ..., "\\_SB.I2CD") vendor data "SLA0"
I2cSerialBusV2 (0x006A, ..., "\\_SB.I2CD") vendor data "SLG0"
GpioInt (Edge, ActiveHigh, ..., "\\_SB.GPIO") { 9 } "SLA0"
Method (SLA0): "-1 0 0", "0 -1 0", "0 0 -1"
Method (SLG0): "1 0 0", "0 1 0", "0 0 1"
} }
Both I2C resources describe the same address, and the driver uses the
first one. The vendor-specific SLA0/SLG0 mount matrices are not parsed
here; the accelerometer orientation is handled in userspace through
the systemd hwdb, as for SMOCF00.
Tested on:
- V3 SE (Ryzen 7 7735U, BIOS 1.03) with this change.
- V3 (Ryzen 7 8840U, BIOS 1.06), kernel 7.2.7, with this change and
the stock firmware tables. The driver binds to i2c-SMOCF05:00, the
WHO_AM_I check passes (0x6a), and both lsm6ds3tr-c_accel and
lsm6ds3tr-c_gyro are registered. Screen auto-rotation works with
iio-sensor-proxy (checked with the device renamed to SMO8B30 via a
DSDT override, i.e. the same ST_LSM6DS3TRC_ID driver data).
Link: https://github.com/mudkipme/awesome-minisforum-v3/issues/2
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
[Jared Wuerzburger: rewrote the changelog with the DSDT excerpt and test
results, dropped the mount matrix patch from the series]
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Jared Wuerzburger <jwuerz@gmail.com>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index fbf4e4ecc..5def1d01b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -145,6 +145,7 @@ MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
{ "SMO8B30", ST_LSM6DS3TRC_ID },
{ "SMOCF00", ST_LSM6DSO_ID },
+ { "SMOCF05", ST_LSM6DS3TRC_ID },
{ }
};
MODULE_DEVICE_TABLE(acpi, st_lsm6dsx_i2c_acpi_match);
--
2.55.0
next prev parent reply other threads:[~2026-09-27 22:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 22:05 [PATCH v3 0/2] iio: imu: st_lsm6dsx: Add ACPI ID SMOCF05 (Minisforum V3 / V3 SE) Jared Wuerzburger
2026-09-27 22:05 ` [PATCH v3 1/2] iio: imu: st_lsm6dsx: Drop trailing comma in ACPI match table entries Jared Wuerzburger
2026-09-28 9:09 ` Andy Shevchenko
2026-09-28 15:28 ` Jared Wuerzburger
2026-09-27 22:05 ` Jared Wuerzburger [this message]
2026-09-28 9:13 ` [PATCH v3 2/2] iio: imu: st_lsm6dsx: Add ACPI ID SMOCF05 for LSM6DS3TR-C Andy Shevchenko
2026-09-28 15:29 ` Jared Wuerzburger
2026-09-28 15:58 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260927220559.24169-3-jwuerz@gmail.com \
--to=jwuerz@gmail.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=nuno.sa@analog.com \
--cc=samuel@dionne-riel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®