[PATCH 0/2] ARM: dts: imx6: phytec-mira: phyBOARD-Mira fixes

[PATCH 0/2] ARM: dts: imx6: phytec-mira: phyBOARD-Mira fixes

[Primoz Fiser]

Two small fixes for the PHYTEC phyBOARD-Mira-i.MX6 boards:

- The i.MX6DL NAND variant was still described as the LC (Low Cost)
  board, missing CAN/PCIe and capped at 100Mbps Ethernet, while every
  other in-tree phyBOARD-Mira .dts is the FF (Full Featured) variant.
  Sync it to match its siblings (1/2).
- Since commit 888e5fad9b78 ("Input: stmpe - add axis inversion and
  swapping capability") landed, the touchscreen axis inversion these
  boards need can be described in devicetree instead of userspace (2/2).


Primoz Fiser (2):
  ARM: dts: imx6dl-phytec-mira-nand: Enable all peripherals
  ARM: dts: imx6qdl-phytec-mira: Add touchscreen-inverted properties

 arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts | 8 ++++++--
 arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi        | 2 ++
 2 files changed, 8 insertions(+), 2 deletions(-)

-- 
2.34.1

[PATCH 1/2] ARM: dts: imx6dl-phytec-mira-nand: Enable all peripherals

[Primoz Fiser]

The current imx6dl-phytec-mira-rdk-nand.dts describes the LC (Low Cost)
variant of the board. However all phyBOARD-Mira boards in-tree are
actually the FF (Full Featured) variants. Now, sync the i.MX6 DL NAND
variant device-tree and enable all peripherals (CAN, PCIe and no speed
limit on Ethernet PHY) to enable all RDK board features.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
 arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
index 8ec27080ca1e..c2780ecb5936 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
@@ -22,8 +22,8 @@ chosen {
 	};
 };
 
-&ethphy {
-	max-speed = <100>;
+&can1 {
+	status = "okay";
 };
 
 &fec {
@@ -50,6 +50,10 @@ &i2c_rtc {
 	status = "okay";
 };
 
+&pcie {
+	status = "okay";
+};
+
 &uart3 {
 	status = "okay";
 };
-- 
2.34.1

[PATCH 2/2] ARM: dts: imx6qdl-phytec-mira: Add touchscreen-inverted properties

[Primoz Fiser]

Since commit 888e5fad9b78 ("Input: stmpe - add axis inversion and
swapping capability") we can handle touchscreen x- and y-axis inversion
directly in the kernel instead of user-space on phyBOARD-Mira-i.MX6.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index a3c2811e9c6f..a7d6af162731 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -164,6 +164,8 @@ stmpe: touchctrl@44 {
 
 		touchscreen {
 			compatible = "st,stmpe-ts";
+			touchscreen-inverted-x;
+			touchscreen-inverted-y;
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
 			st,ref-sel = <0>;
-- 
2.34.1