From: Srirangan Madhavan <smadhavan@nvidia.com>
To: Alison Schofield <alison.schofield@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Dave Jiang <dave.jiang@intel.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Ira Weiny <ira.weiny@intel.com>,
Jonathan Cameron <jic23@kernel.org>,
Vishal Verma <vishal.l.verma@intel.com>,
linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Alex Williamson <alex.williamson@redhat.com>,
vsethi@nvidia.com, alwilliamson@nvidia.com,
Sai Yashwanth Reddy Kancherla <skancherla@nvidia.com>,
Vishal Aslot <vaslot@nvidia.com>,
Manish Honap <mhonap@nvidia.com>, Jiandi An <jan@nvidia.com>,
Richard Cheng <icheng@nvidia.com>,
linux-tegra@vger.kernel.org,
Srirangan Madhavan <smadhavan@nvidia.com>
Subject: [PATCH v14 10/16] cxl: Cache endpoint HDM state during PCI enumeration
Date: Thu, 1 Oct 2026 09:22:21 +0000 [thread overview]
Message-ID: <20261001092227.3004747-11-smadhavan@nvidia.com> (raw)
In-Reply-To: <20261001092227.3004747-1-smadhavan@nvidia.com>
PCI capability initialization runs before BAR resources are finalized,
while driver binding is too late for driver-independent reset support.
Create pci_dev->hdm during pci_bus_add_device(), after PCI resource setup
and before driver binding.
Cache BAR-relative HDM location, global control, decoder settings, and CXL
Device DVSEC Control, then publish the completed cache under cxl_rwsem.dpa.
Restore PCI_COMMAND after temporary MMIO access and reject decoder-count
changes.
Signed-off-by: Srirangan Madhavan <smadhavan@nvidia.com>
---
drivers/cxl/core/Makefile | 3 +-
drivers/cxl/core/pci.c | 15 +-
drivers/cxl/core/regs.c | 9 ++
drivers/cxl/core/resource.c | 277 ++++++++++++++++++++++++++++++++++++
drivers/pci/bus.c | 2 +
drivers/pci/probe.c | 2 +
include/cxl/cxl.h | 21 +++
tools/testing/cxl/Kbuild | 1 -
8 files changed, 326 insertions(+), 4 deletions(-)
diff --git a/drivers/cxl/core/Makefile b/drivers/cxl/core/Makefile
index 30470799e059..2335059f687a 100644
--- a/drivers/cxl/core/Makefile
+++ b/drivers/cxl/core/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_CXL_BUS) += cxl_core.o
-obj-$(CONFIG_CXL_RESET) += resource.o
+obj-$(CONFIG_CXL_RESET) += regs.o resource.o
obj-$(CONFIG_CXL_SUSPEND) += suspend.o
ccflags-y += -I$(srctree)/drivers/cxl
@@ -8,7 +8,6 @@ CFLAGS_trace.o = -DTRACE_INCLUDE_PATH=. -I$(src)
cxl_core-y := port.o
cxl_core-y += pmem.o
-cxl_core-y += regs.o
cxl_core-y += memdev.o
cxl_core-y += mbox.o
cxl_core-y += pci.o
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 9411694b93b3..5fef673ecd65 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -180,6 +180,16 @@ int cxl_await_media_ready(struct cxl_dev_state *cxlds)
}
EXPORT_SYMBOL_NS_GPL(cxl_await_media_ready, "CXL");
+static void cxl_hdm_cache_dvsec_ctrl(struct pci_dev *pdev, u16 ctrl)
+{
+ guard(rwsem_write)(&cxl_rwsem.dpa);
+ if (!pdev->hdm)
+ return;
+
+ pdev->hdm->dvsec_ctrl = ctrl;
+ pdev->hdm->dvsec_ctrl_valid = true;
+}
+
static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
{
struct pci_dev *pdev = to_pci_dev(cxlds->dev);
@@ -191,8 +201,10 @@ static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
if (rc)
return pcibios_err_to_errno(rc);
- if ((ctrl & PCI_DVSEC_CXL_MEM_ENABLE) == val)
+ if ((ctrl & PCI_DVSEC_CXL_MEM_ENABLE) == val) {
+ cxl_hdm_cache_dvsec_ctrl(pdev, ctrl);
return 1;
+ }
ctrl &= ~PCI_DVSEC_CXL_MEM_ENABLE;
ctrl |= val;
@@ -200,6 +212,7 @@ static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
if (rc)
return pcibios_err_to_errno(rc);
+ cxl_hdm_cache_dvsec_ctrl(pdev, ctrl);
return 0;
}
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index 20c2d9fbcfe7..ba1f942d20e1 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -200,6 +200,7 @@ void __iomem *devm_cxl_iomap_block(struct device *dev, resource_size_t addr,
return ret_val;
}
+EXPORT_SYMBOL_NS_GPL(devm_cxl_iomap_block, "CXL");
int cxl_map_component_regs(const struct cxl_register_map *map,
struct cxl_component_regs *regs,
@@ -285,6 +286,8 @@ static bool cxl_decode_regblock(struct pci_dev *pdev, u32 reg_lo, u32 reg_hi,
}
map->reg_type = reg_type;
+ map->bar = bar;
+ map->bar_offset = offset;
map->resource = pci_resource_start(pdev, bar) + offset;
map->max_size = pci_resource_len(pdev, bar) - offset;
return true;
@@ -309,6 +312,7 @@ static int __cxl_find_regblock_instance(struct pci_dev *pdev, enum cxl_regloc_ty
*map = (struct cxl_register_map) {
.host = &pdev->dev,
.resource = CXL_RESOURCE_NONE,
+ .bar = -1,
};
regloc = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
@@ -339,6 +343,8 @@ static int __cxl_find_regblock_instance(struct pci_dev *pdev, enum cxl_regloc_ty
}
map->resource = CXL_RESOURCE_NONE;
+ map->bar = -1;
+ map->bar_offset = 0;
if (index == CXL_INSTANCES_COUNT)
return instance;
@@ -518,6 +524,7 @@ u16 cxl_rcrb_to_aer(struct device *dev, resource_size_t rcrb)
return offset;
}
+EXPORT_SYMBOL_NS_GPL(cxl_rcrb_to_aer, "CXL");
static resource_size_t cxl_rcrb_to_linkcap(struct device *dev, struct cxl_dport *dport)
{
@@ -634,6 +641,7 @@ resource_size_t __rcrb_to_component(struct device *dev, struct cxl_rcrb_info *ri
return component_reg_phys;
}
+EXPORT_SYMBOL_NS_GPL(__rcrb_to_component, "CXL");
resource_size_t cxl_rcd_component_reg_phys(struct device *dev,
struct cxl_dport *dport)
@@ -642,3 +650,4 @@ resource_size_t cxl_rcd_component_reg_phys(struct device *dev,
return CXL_RESOURCE_NONE;
return __rcrb_to_component(dev, &dport->rcrb, CXL_RCRB_UPSTREAM);
}
+EXPORT_SYMBOL_NS_GPL(cxl_rcd_component_reg_phys, "CXL");
diff --git a/drivers/cxl/core/resource.c b/drivers/cxl/core/resource.c
index 8d2fbc49a06f..c3f53c1b93fd 100644
--- a/drivers/cxl/core/resource.c
+++ b/drivers/cxl/core/resource.c
@@ -2,9 +2,17 @@
/* Copyright (c) 2026 NVIDIA Corporation & Affiliates */
#include <linux/delay.h>
#include <linux/bug.h>
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
#include <linux/errno.h>
#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <cxl/pci.h>
#include "cxl.h"
#include "core.h"
@@ -166,3 +174,272 @@ int cxl_hdm_unpack_decoder(struct cxl_decoder_settings *settings, int id,
return 0;
}
EXPORT_SYMBOL_FOR_MODULES(cxl_hdm_unpack_decoder, "cxl_core");
+
+static int cxl_pci_hdm_dvsec(struct pci_dev *pdev)
+{
+ u16 cap;
+ int dvsec;
+ int rc;
+
+ dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
+ PCI_DVSEC_CXL_DEVICE);
+ if (!dvsec)
+ return -ENXIO;
+
+ rc = pci_read_config_word(pdev, dvsec + PCI_DVSEC_CXL_CAP, &cap);
+ if (rc)
+ return pcibios_err_to_errno(rc);
+ if (!(cap & PCI_DVSEC_CXL_MEM_CAPABLE) ||
+ !FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT, cap))
+ return -ENXIO;
+
+ return dvsec;
+}
+
+static int cxl_pci_hdm_read_decoder(struct pci_dev *pdev,
+ struct cxl_decoder_settings *settings,
+ void __iomem *hdm, int id)
+{
+ u64 target_or_skip, base, size;
+ u32 ctrl;
+ int rc;
+
+ ctrl = readl(hdm + CXL_HDM_DECODER0_CTRL_OFFSET(id));
+ base = ((u64)readl(hdm + CXL_HDM_DECODER0_BASE_HIGH_OFFSET(id)) << 32) |
+ readl(hdm + CXL_HDM_DECODER0_BASE_LOW_OFFSET(id));
+ size = ((u64)readl(hdm + CXL_HDM_DECODER0_SIZE_HIGH_OFFSET(id)) << 32) |
+ readl(hdm + CXL_HDM_DECODER0_SIZE_LOW_OFFSET(id));
+ target_or_skip =
+ ((u64)readl(hdm + CXL_HDM_DECODER0_TL_HIGH(id)) << 32) |
+ readl(hdm + CXL_HDM_DECODER0_TL_LOW(id));
+
+ rc = cxl_hdm_unpack_decoder(settings, id, ctrl, base, size,
+ target_or_skip);
+ if (rc) {
+ pci_err(pdev,
+ "CXL HDM decoder %d has invalid configuration: %d\n",
+ id, rc);
+ return rc;
+ }
+
+ if (!(settings->config.flags & CXL_DECODER_F_ENABLE))
+ *settings = (struct cxl_decoder_settings) {
+ .config.id = id,
+ };
+
+ return 0;
+}
+
+static void __iomem *cxl_pci_hdm_map_regs(struct pci_dev *pdev,
+ struct cxl_register_map *map,
+ resource_size_t *hdm_offset,
+ int *decoder_count)
+{
+ struct cxl_reg_map *hdm_map = &map->component_map.hdm_decoder;
+ void __iomem *hdm;
+ size_t required;
+ int rc;
+
+ /* cxl_setup_regs() populates hdm_map, including its valid bit. */
+ rc = cxl_setup_regs(map);
+ if (rc)
+ return ERR_PTR(rc);
+ if (!hdm_map->valid)
+ return ERR_PTR(-ENODEV);
+ if (hdm_map->offset > map->max_size ||
+ hdm_map->size > map->max_size - hdm_map->offset)
+ return ERR_PTR(-ENXIO);
+ if (check_add_overflow(map->bar_offset,
+ (resource_size_t)hdm_map->offset, hdm_offset))
+ return ERR_PTR(-EOVERFLOW);
+
+ hdm = ioremap(map->resource + hdm_map->offset, hdm_map->size);
+ if (!hdm)
+ return ERR_PTR(-ENOMEM);
+
+ *decoder_count =
+ cxl_hdm_decoder_count(readl(hdm + CXL_HDM_DECODER_CAP_OFFSET));
+ if (*decoder_count < 0) {
+ iounmap(hdm);
+ return ERR_PTR(*decoder_count);
+ }
+
+ /* The last decoder's target-list high register must fit in the mapping. */
+ required = CXL_HDM_DECODER0_TL_HIGH(*decoder_count - 1) + sizeof(u32);
+ if (required > hdm_map->size) {
+ pci_err(pdev,
+ "CXL HDM decoder count exceeds mapped register block\n");
+ iounmap(hdm);
+ return ERR_PTR(-ENXIO);
+ }
+
+ return hdm;
+}
+
+static struct cxl_hdm_info *__cxl_pci_hdm_read_info(struct pci_dev *pdev,
+ struct cxl_register_map *map,
+ int dvsec)
+{
+ struct cxl_reg_map *hdm_map = &map->component_map.hdm_decoder;
+ resource_size_t hdm_offset;
+ void __iomem *hdm;
+ int decoder_count;
+ u16 dvsec_ctrl;
+ int rc;
+
+ hdm = cxl_pci_hdm_map_regs(pdev, map, &hdm_offset, &decoder_count);
+ if (IS_ERR(hdm))
+ return ERR_CAST(hdm);
+
+ rc = pci_read_config_word(pdev, dvsec + PCI_DVSEC_CXL_CTRL,
+ &dvsec_ctrl);
+ if (rc) {
+ rc = pcibios_err_to_errno(rc);
+ goto out_unmap;
+ }
+
+ struct cxl_hdm_info *info =
+ kzalloc_flex(*info, settings, decoder_count, GFP_KERNEL);
+ if (!info) {
+ rc = -ENOMEM;
+ goto out_unmap;
+ }
+
+ info->decoder_count = decoder_count;
+ info->hdm_bar = map->bar;
+ info->hdm_offset = hdm_offset;
+ info->hdm_size = hdm_map->size;
+ info->global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
+ info->dvsec_ctrl = dvsec_ctrl;
+ info->dvsec_ctrl_valid = true;
+
+ for (int i = 0; i < decoder_count; i++) {
+ rc = cxl_pci_hdm_read_decoder(pdev, &info->settings[i], hdm, i);
+ if (rc)
+ goto out_free;
+ }
+
+ /*
+ * A changed decoder count means the snapshot no longer describes the
+ * complete hardware state. Reject it rather than publish a partial cache.
+ */
+ rc = cxl_hdm_decoder_count(readl(hdm + CXL_HDM_DECODER_CAP_OFFSET));
+ if (rc != decoder_count) {
+ pci_err(pdev, "CXL HDM decoder count changed from %d to %d\n",
+ decoder_count, rc);
+ rc = -ENXIO;
+ goto out_free;
+ }
+
+ iounmap(hdm);
+ return info;
+
+out_free:
+ kfree(info);
+out_unmap:
+ iounmap(hdm);
+ return ERR_PTR(rc);
+}
+
+static struct cxl_hdm_info *cxl_pci_hdm_read_info(struct pci_dev *pdev,
+ struct cxl_register_map *map,
+ int dvsec)
+{
+ struct cxl_hdm_info *info;
+ u16 command;
+ int rc;
+
+ guard(pci_dev)(pdev);
+
+ rc = pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (rc)
+ return ERR_PTR(pcibios_err_to_errno(rc));
+
+ if (command & PCI_COMMAND_MEMORY)
+ return __cxl_pci_hdm_read_info(pdev, map, dvsec);
+
+ rc = pci_write_config_word(pdev, PCI_COMMAND,
+ command | PCI_COMMAND_MEMORY);
+ if (rc)
+ return ERR_PTR(pcibios_err_to_errno(rc));
+
+ info = __cxl_pci_hdm_read_info(pdev, map, dvsec);
+ rc = pci_write_config_word(pdev, PCI_COMMAND, command);
+ if (!rc)
+ return info;
+
+ if (IS_ERR(info)) {
+ pci_err(pdev,
+ "failed to restore PCI_COMMAND after CXL HDM cache init: %d\n",
+ pcibios_err_to_errno(rc));
+ return info;
+ }
+
+ kfree(info);
+ return ERR_PTR(pcibios_err_to_errno(rc));
+}
+
+static int __pci_cxl_hdm_cache_init(struct pci_dev *pdev)
+{
+ struct cxl_register_map map = { };
+ struct resource *bar;
+ int dvsec;
+ int rc;
+
+ /* Avoid duplicate MMIO reads when the cache is already present. */
+ scoped_guard(rwsem_read, &cxl_rwsem.dpa)
+ if (pdev->hdm)
+ return 0;
+
+ dvsec = cxl_pci_hdm_dvsec(pdev);
+ if (dvsec == -ENXIO)
+ return 0;
+ if (dvsec < 0)
+ return dvsec;
+
+ rc = cxl_find_regblock(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
+ if (rc)
+ return rc;
+ if (map.bar < 0 || map.bar >= PCI_STD_NUM_BARS)
+ return -ENODEV;
+
+ bar = &pdev->resource[map.bar];
+ if (!pci_resource_len(pdev, map.bar) ||
+ (bar->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED)) ||
+ resource_type(bar) != IORESOURCE_MEM || !bar->start || !bar->end)
+ return -ENODEV;
+
+ struct cxl_hdm_info *read_info =
+ cxl_pci_hdm_read_info(pdev, &map, dvsec);
+ if (IS_ERR(read_info))
+ return PTR_ERR(read_info);
+
+ struct cxl_hdm_info *info __free(kfree) = read_info;
+ guard(rwsem_write)(&cxl_rwsem.dpa);
+ /* Another initializer may have published while we read MMIO. */
+ if (!pdev->hdm)
+ pdev->hdm = no_free_ptr(info);
+
+ return 0;
+}
+
+void pci_cxl_hdm_cache_init(struct pci_dev *pdev)
+{
+ int rc;
+
+ rc = __pci_cxl_hdm_cache_init(pdev);
+ if (rc)
+ pci_dbg(pdev, "CXL HDM cache init failed: %d\n", rc);
+}
+EXPORT_SYMBOL_FOR_MODULES(pci_cxl_hdm_cache_init, "cxl_core");
+
+void pci_cxl_hdm_cache_release(struct pci_dev *pdev)
+{
+ struct cxl_hdm_info *info;
+
+ guard(rwsem_write)(&cxl_rwsem.dpa);
+ info = pdev->hdm;
+ /* Unpublish before freeing so subsequent readers cannot use stale state. */
+ pdev->hdm = NULL;
+ kfree(info);
+}
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 655ed53436d3..d866452222b6 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -18,6 +18,7 @@
#include <linux/pm_runtime.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
+#include <cxl/cxl.h>
#include "pci.h"
@@ -359,6 +360,7 @@ void pci_bus_add_device(struct pci_dev *dev)
/* Save config space for error recoverability */
pci_save_state(dev);
+ pci_cxl_hdm_cache_init(dev);
/*
* Enable runtime PM, which potentially allows the device to
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 27008e2ea5af..752347464a4d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -24,6 +24,7 @@
#include <linux/pm_runtime.h>
#include <linux/bitfield.h>
#include <trace/events/pci.h>
+#include <cxl/cxl.h>
#include "pci.h"
static struct resource busn_resource = {
@@ -2484,6 +2485,7 @@ static void pci_release_dev(struct device *dev)
struct pci_dev *pci_dev;
pci_dev = to_pci_dev(dev);
+ pci_cxl_hdm_cache_release(pci_dev);
pci_release_capabilities(pci_dev);
pci_release_of_node(pci_dev);
pcibios_release_device(pci_dev);
diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
index e200c5c56b92..a1c63e031dd4 100644
--- a/include/cxl/cxl.h
+++ b/include/cxl/cxl.h
@@ -26,6 +26,7 @@ enum cxl_devtype {
};
struct cxl_region;
+struct pci_dev;
enum cxl_decoder_type {
CXL_DECODER_DEVMEM = 2,
@@ -92,6 +93,9 @@ struct cxl_decoder_settings {
* @dvsec_ctrl: CXL DVSEC control register
* @dvsec_ctrl_valid: whether @dvsec_ctrl contains valid state
* @settings: per-decoder programming state
+ *
+ * Publication through pci_dev.hdm and all mutable fields are protected by
+ * cxl_rwsem.dpa.
*/
struct cxl_hdm_info {
int decoder_count;
@@ -177,6 +181,8 @@ struct cxl_pmu_reg_map {
* @base: virtual base of the register-block-BAR + @block_offset
* @resource: physical resource base of the register block
* @max_size: maximum mapping size to perform register search
+ * @bar: PCI BAR containing the register block
+ * @bar_offset: register block offset relative to @bar
* @reg_type: see enum cxl_regloc_type
* @component_map: cxl_reg_map for component registers
* @device_map: cxl_reg_maps for device registers
@@ -187,6 +193,8 @@ struct cxl_register_map {
void __iomem *base;
resource_size_t resource;
resource_size_t max_size;
+ int bar;
+ resource_size_t bar_offset;
u8 reg_type;
union {
struct cxl_component_reg_map component_map;
@@ -195,6 +203,19 @@ struct cxl_register_map {
};
};
+#ifdef CONFIG_CXL_RESET
+void pci_cxl_hdm_cache_init(struct pci_dev *pdev);
+void pci_cxl_hdm_cache_release(struct pci_dev *pdev);
+#else
+static inline void pci_cxl_hdm_cache_init(struct pci_dev *pdev)
+{
+}
+
+static inline void pci_cxl_hdm_cache_release(struct pci_dev *pdev)
+{
+}
+#endif
+
/**
* struct cxl_dpa_perf - DPA performance property entry
* @dpa_range: range for DPA address
diff --git a/tools/testing/cxl/Kbuild b/tools/testing/cxl/Kbuild
index 2be1df80fcc9..e80500f457a9 100644
--- a/tools/testing/cxl/Kbuild
+++ b/tools/testing/cxl/Kbuild
@@ -55,7 +55,6 @@ obj-m += cxl_core.o
cxl_core-y := $(CXL_CORE_SRC)/port.o
cxl_core-y += $(CXL_CORE_SRC)/pmem.o
-cxl_core-y += $(CXL_CORE_SRC)/regs.o
cxl_core-y += $(CXL_CORE_SRC)/memdev.o
cxl_core-y += $(CXL_CORE_SRC)/mbox.o
cxl_core-y += $(CXL_CORE_SRC)/pci.o
--
2.43.0
next prev parent reply other threads:[~2026-10-01 9:23 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 9:22 [PATCH v14 00/16] PCI/CXL: Add CXL reset support for Type 2 devices Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 01/16] cxl: Drop stale decoder interleave limit comment Srirangan Madhavan
2026-10-02 9:33 ` Richard Cheng
2026-10-01 9:22 ` [PATCH v14 02/16] cxl: Share CXL port upstream PCI device lookup Srirangan Madhavan
2026-10-02 9:48 ` Richard Cheng
2026-10-01 9:22 ` [PATCH v14 03/16] cxl: Move decoder declarations to shared header Srirangan Madhavan
2026-10-02 9:49 ` Richard Cheng
2026-10-01 9:22 ` [PATCH v14 04/16] cxl: Embed decoder configuration in a standalone structure Srirangan Madhavan
2026-10-02 10:17 ` Richard Cheng
2026-10-01 9:22 ` [PATCH v14 05/16] cxl: Introduce reusable HDM decoder settings Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 06/16] cxl: Move HDM decoder helpers to built-in resource code Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 07/16] cxl: Share HDM decoder register unpacking Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 08/16] cxl: Reject overflowing HDM decoder ranges Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 09/16] cxl: Refresh cached PCI HDM decoder settings Srirangan Madhavan
2026-10-01 9:22 ` Srirangan Madhavan [this message]
2026-10-01 9:22 ` [PATCH v14 11/16] cxl: Add CXL Device Reset sequencing Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 12/16] cxl: Validate and synchronize HDM ranges around reset Srirangan Madhavan
2026-10-02 8:06 ` Richard Cheng
2026-10-01 9:22 ` [PATCH v14 13/16] PCI/CXL: Reject reset with unsafe function scope Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 14/16] cxl: Restore CXL state after PCI reset Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 15/16] PCI/CXL: Expose CXL Reset as a PCI reset method Srirangan Madhavan
2026-10-01 9:22 ` [PATCH v14 16/16] PCI/CXL: Restore CXL state after CXL bus reset Srirangan Madhavan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261001092227.3004747-11-smadhavan@nvidia.com \
--to=smadhavan@nvidia.com \
--cc=alex.williamson@redhat.com \
--cc=alison.schofield@intel.com \
--cc=alwilliamson@nvidia.com \
--cc=bhelgaas@google.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=icheng@nvidia.com \
--cc=ira.weiny@intel.com \
--cc=jan@nvidia.com \
--cc=jic23@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mhonap@nvidia.com \
--cc=skancherla@nvidia.com \
--cc=vaslot@nvidia.com \
--cc=vishal.l.verma@intel.com \
--cc=vsethi@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®