* [PATCH] arm64: dts: rockchip: Fix adc-keys wiring for Orange Pi 5 family
@ 2026-10-12 3:39 Dennis Gilmore
2026-11-01 22:16 ` Heiko Stuebner
0 siblings, 1 reply; 2+ messages in thread
From: Dennis Gilmore @ 2026-10-12 3:39 UTC (permalink / raw)
To: linux-kernel, linux-rockchip, linux-arm-kernel, devicetree
Cc: Cristian Ciocaltea, Alexey Charkov, Dennis Gilmore,
Heiko Stuebner, Conor Dooley, Krzysztof Kozlowski, Rob Herring
When working on u-boot for the Orange Pi 5 Pro it was called out that
the Pro does not have a recovery button and was missing the definition
for the maskrom button.
The shared rk3588s-orangepi-5.dtsi describes a "Recovery" adc-keys
button on SARADC channel 1. This is correct for the Orange Pi 5 and
5B, but the Orange Pi 5 Pro schematic shows channel 1 is pulled up
with no button ever wired to it, so the key can never be pressed.
Each board's schematic also shows SARADC channel 0 is connected to
a real, populated Maskrom button, but no board described it.
Fix this by moving the common hardware (Maskrom on channel 0) into
the shared base used by all three boards, and keeping the
board-specific hardware (Recovery on channel 1) only in the dtsi
shared by the Orange Pi 5 and 5B, which the Pro does not include:
- rk3588s-orangepi-5.dtsi (OPi5, OPi5B, OPi5 Pro): adc-keys-0,
button-maskrom on &saradc 0.
- rk3588s-orangepi-5-5b.dtsi (OPi5, OPi5B only): adc-keys-1,
button-recovery on &saradc 1.
Verified against the Orange Pi 5, 5B and 5 Pro v1.2 schematics:
the Maskrom button is wired identically on all three (button -> 22R
-> SARADC_IN0_BOOT, AW15, pulled up to VCCA_1V8_S0), while the
Recovery button only exists as a populated pull-up with no button
attached on the Pro (the board's "RESET"-silkscreened pushbutton
is wired to PMIC_RESET_L, not to the SARADC).
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
.../boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi | 15 +++++++++++++++
.../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 12 ++++++------
2 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
index 6e081bc06cfe..d73f671b8f5f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
@@ -4,10 +4,25 @@
* but not the Orange Pi 5 Pro.
*/
+#include <dt-bindings/input/input.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588s-orangepi-5.dtsi"
/ {
+ adc-keys-1 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <1800>;
+ };
+ };
+
aliases {
ethernet0 = &gmac1;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index fd0efa8d1bfb..709efa709b7a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -14,17 +14,17 @@ chosen {
stdout-path = "serial2:1500000n8";
};
- adc-keys {
+ adc-keys-0 {
compatible = "adc-keys";
- io-channels = <&saradc 1>;
+ io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <1800>;
+ button-maskrom {
+ label = "Mask Rom";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <2000>;
};
};
--
2.56.0
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] arm64: dts: rockchip: Fix adc-keys wiring for Orange Pi 5 family
2026-10-12 3:39 [PATCH] arm64: dts: rockchip: Fix adc-keys wiring for Orange Pi 5 family Dennis Gilmore
@ 2026-11-01 22:16 ` Heiko Stuebner
0 siblings, 0 replies; 2+ messages in thread
From: Heiko Stuebner @ 2026-11-01 22:16 UTC (permalink / raw)
To: linux-kernel, linux-rockchip, linux-arm-kernel, devicetree,
Dennis Gilmore
Cc: Heiko Stuebner, Cristian Ciocaltea, Alexey Charkov, Conor Dooley,
Krzysztof Kozlowski, Rob Herring
On Sun, 11 Oct 2026 22:39:29 -0500, Dennis Gilmore wrote:
> When working on u-boot for the Orange Pi 5 Pro it was called out that
> the Pro does not have a recovery button and was missing the definition
> for the maskrom button.
>
> The shared rk3588s-orangepi-5.dtsi describes a "Recovery" adc-keys
> button on SARADC channel 1. This is correct for the Orange Pi 5 and
> 5B, but the Orange Pi 5 Pro schematic shows channel 1 is pulled up
> with no button ever wired to it, so the key can never be pressed.
> Each board's schematic also shows SARADC channel 0 is connected to
> a real, populated Maskrom button, but no board described it.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: rockchip: Fix adc-keys wiring for Orange Pi 5 family
commit: 591ff7dda0603cf21cfe3bfd7d9b1d10be8154c1
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-01 22:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-12 3:39 [PATCH] arm64: dts: rockchip: Fix adc-keys wiring for Orange Pi 5 family Dennis Gilmore
2026-11-01 22:16 ` Heiko Stuebner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®