Re: [PATCH] PCI: Avoid D3 on PLX PEX 8532/8533/8548 downstream ports

[Bjorn Helgaas <helgaas@kernel.org>]

On Sun, Sep 27, 2026 at 12:56:09PM +0200, Imre Kaloz wrote:
> Runtime PM suspends an idle downstream port of a PLX/Broadcom PEX
> 8532/8533/8548 switch to D3hot, but that takes the whole switch down
> with it: any device behind another port of the same switch then
> faults with a fatal bus error on its next access, e.g. mptsas probe
> on a Sun Ultra 45.
> 
> This surfaced on sparc64 once commit a5fb3ff63287 ("PCI: Allow PCI
> bridges to go to D3Hot on all non-x86") let bridges enter D3hot. Keep
> these downstream ports out of D3 by setting PCI_DEV_FLAGS_NO_D3.
> 
> Fixes: a5fb3ff63287 ("PCI: Allow PCI bridges to go to D3Hot on all non-x86")
> Cc: stable@vger.kernel.org
> Signed-off-by: Imre Kaloz <kaloz@kernel.org>

Applied to pci/pm for v7.4, thanks!

> ---
>  drivers/pci/quirks.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index de9bbccda21f..a3c9250182a6 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -2381,6 +2381,24 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
>  DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050);
>  DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050);
>  
> +/*
> + * An idle downstream port of a PLX/Broadcom PEX 8532/8533/8548 switch
> + * autosuspends into D3hot, and that takes the whole switch down with
> + * it -- any device behind another port of the same switch then sees a
> + * fatal, non-recoverable bus fault on its next access. Keep these
> + * ports out of D3 entirely.
> + */
> +static void quirk_plx_pex_no_d3(struct pci_dev *dev)
> +{
> +	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) {
> +		dev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
> +		pci_info(dev, "avoiding D3 on this downstream port\n");
> +	}
> +}
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PLX, 0x8532, quirk_plx_pex_no_d3);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PLX, 0x8533, quirk_plx_pex_no_d3);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PLX, 0x8548, quirk_plx_pex_no_d3);
> +
>  static void quirk_netmos(struct pci_dev *dev)
>  {
>  	unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
> 
> base-commit: fe2ec83746e501645709761605c2464a44fd2929
> -- 
> 2.47.3
>