From: Paul Cercueil <paul.cercueil@bootlin.com>
To: Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <mwalle@kernel.org>,
Takahiro Kuwano <takahiro.kuwano@infineon.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Mark Brown <broonie@kernel.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Kees Cook <kees@kernel.org>, Tony Luck <tony.luck@intel.com>,
"Guilherme G . Piccoli" <gpiccoli@igalia.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-spi@vger.kernel.org, Bharat Bhushan <bbhushan2@marvell.com>,
Sunil Kovvuri Goutham <sgoutham@marvell.com>,
Tanmay Jagdale <tanmay@marvell.com>,
Paul Cercueil <paul.cercueil@bootlin.com>
Subject: [PATCH v3 6/7] spi: cadence-xspi: Add support for panic writes
Date: Wed, 14 Oct 2026 17:43:00 +0200 [thread overview]
Message-ID: <20261014154301.157755-7-paul.cercueil@bootlin.com> (raw)
In-Reply-To: <20261014154301.157755-1-paul.cercueil@bootlin.com>
From: Tanmay Jagdale <tanmay@marvell.com>
Advertise support for panic writes. When a memory op is received with
the 'panic' flag set, the driver will then work without relying on
interrupts and without sleeping.
Signed-off-by: Tanmay Jagdale <tanmay@marvell.com>
Co-developed-by: Paul Cercueil <paul.cercueil@bootlin.com>
Signed-off-by: Paul Cercueil <paul.cercueil@bootlin.com>
---
Notes:
v2: - Don't enable interrupts if doing a panic write
- Use a new cdns_readl_poll() macro that will resolve to calling
readl_relaxed_poll_timeout_atomic() when doing a panic write, or
readl_relaxed_poll_timeout() otherwise.
- Drop cdns_xspi->panic_write. We don't actually need to check it in
cdns_xspi_is_dll_locked(), because this code is never called in
the kernel panic path.
v3: No change
drivers/spi/spi-cadence-xspi.c | 52 ++++++++++++++++++----------------
1 file changed, 27 insertions(+), 25 deletions(-)
diff --git a/drivers/spi/spi-cadence-xspi.c b/drivers/spi/spi-cadence-xspi.c
index 2a2a40bf0a4c..a7fd715c45d5 100644
--- a/drivers/spi/spi-cadence-xspi.c
+++ b/drivers/spi/spi-cadence-xspi.c
@@ -287,6 +287,10 @@
#define GENERIC_CMD_REG_3_NEEDED(len) (len > 7)
#define GENERIC_CMD_REG_2_NEEDED(len) (len > 3)
+#define cdns_readl_poll(addr, val, cond, delay_us, timeout_us, can_sleep) \
+ ((can_sleep) ? readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+ : readl_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us))
+
enum cdns_xspi_stig_instr_type {
CDNS_XSPI_STIG_INSTR_TYPE_0,
CDNS_XSPI_STIG_INSTR_TYPE_1,
@@ -353,40 +357,33 @@ struct cdns_xspi_dev {
int current_xfer_qword;
};
-static int cdns_xspi_wait_for_controller_idle(struct cdns_xspi_dev *cdns_xspi)
+static int cdns_xspi_wait_for_controller_idle(struct cdns_xspi_dev *cdns_xspi, bool sleep)
{
u32 ctrl_stat;
- return readl_relaxed_poll_timeout(cdns_xspi->iobase +
- CDNS_XSPI_CTRL_STATUS_REG,
- ctrl_stat,
- ((ctrl_stat &
- CDNS_XSPI_CTRL_BUSY) == 0),
- 100, 1000);
+ return cdns_readl_poll(cdns_xspi->iobase + CDNS_XSPI_CTRL_STATUS_REG,
+ ctrl_stat, !(ctrl_stat & CDNS_XSPI_CTRL_BUSY),
+ 100, 1000, sleep);
}
static bool cdns_xspi_is_stig_ready(struct cdns_xspi_dev *cdns_xspi, bool sleep)
{
u32 ctrl_stat;
- return !readl_relaxed_poll_timeout
- (cdns_xspi->iobase + CDNS_XSPI_CTRL_STATUS_REG,
- ctrl_stat,
- ((ctrl_stat & BIT(3)) == 0),
- sleep ? MRVL_XSPI_POLL_DELAY_US : 0,
- sleep ? MRVL_XSPI_POLL_TIMEOUT_US : 0);
+ return !cdns_readl_poll(cdns_xspi->iobase + CDNS_XSPI_CTRL_STATUS_REG,
+ ctrl_stat, !(ctrl_stat & BIT(3)),
+ MRVL_XSPI_POLL_DELAY_US,
+ MRVL_XSPI_POLL_TIMEOUT_US, sleep);
}
static bool cdns_xspi_is_sdma_ready(struct cdns_xspi_dev *cdns_xspi, bool sleep)
{
u32 ctrl_stat;
- if (readl_relaxed_poll_timeout
- (cdns_xspi->iobase + CDNS_XSPI_INTR_STATUS_REG,
- ctrl_stat,
- (ctrl_stat & CDNS_XSPI_SDMA_TRIGGER),
- sleep ? MRVL_XSPI_POLL_DELAY_US : 0,
- sleep ? MRVL_XSPI_POLL_TIMEOUT_US : 0)) {
+ if (cdns_readl_poll(cdns_xspi->iobase + CDNS_XSPI_INTR_STATUS_REG,
+ ctrl_stat, (ctrl_stat & CDNS_XSPI_SDMA_TRIGGER),
+ MRVL_XSPI_POLL_DELAY_US, MRVL_XSPI_POLL_TIMEOUT_US,
+ sleep)) {
return false;
}
@@ -557,14 +554,14 @@ static int cdns_xspi_send_stig_command(struct cdns_xspi_dev *cdns_xspi,
int ret;
int dummybytes = op->dummy.nbytes;
- ret = cdns_xspi_wait_for_controller_idle(cdns_xspi);
+ ret = cdns_xspi_wait_for_controller_idle(cdns_xspi, !op->panic_write);
if (ret < 0)
return -EIO;
writel(FIELD_PREP(CDNS_XSPI_CTRL_WORK_MODE, CDNS_XSPI_WORK_MODE_STIG),
cdns_xspi->iobase + CDNS_XSPI_CTRL_CONFIG_REG);
- if (cdns_xspi->irq >= 0)
+ if (cdns_xspi->irq >= 0 && !op->panic_write)
cdns_xspi->set_interrupts_handler(cdns_xspi, true);
cdns_xspi->sdma_error = false;
@@ -595,23 +592,23 @@ static int cdns_xspi_send_stig_command(struct cdns_xspi_dev *cdns_xspi,
cdns_xspi_trigger_command(cdns_xspi, cmd_regs);
- if (cdns_xspi->irq >= 0) {
+ if (cdns_xspi->irq >= 0 && !op->panic_write) {
wait_for_completion(&cdns_xspi->sdma_complete);
if (cdns_xspi->sdma_error) {
cdns_xspi->set_interrupts_handler(cdns_xspi, false);
return -EIO;
}
- } else if (!cdns_xspi_is_sdma_ready(cdns_xspi, true)) {
+ } else if (!cdns_xspi_is_sdma_ready(cdns_xspi, !op->panic_write)) {
return -EIO;
}
cdns_xspi->sdma_handler(cdns_xspi);
}
- if (cdns_xspi->irq >= 0) {
+ if (cdns_xspi->irq >= 0 && !op->panic_write) {
wait_for_completion(&cdns_xspi->cmd_complete);
cdns_xspi->set_interrupts_handler(cdns_xspi, false);
- } else if (!cdns_xspi_is_stig_ready(cdns_xspi, true)) {
+ } else if (!cdns_xspi_is_stig_ready(cdns_xspi, !op->panic_write)) {
return -EIO;
}
@@ -1195,6 +1192,10 @@ static int cdns_xspi_transfer_one_message_b0(struct spi_controller *controller,
}
#endif
+static const struct spi_controller_mem_caps cdns_xspi_mem_caps = {
+ .panic_write = true,
+};
+
static int cdns_xspi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1315,6 +1316,7 @@ static int cdns_xspi_probe(struct platform_device *pdev)
}
host->num_chipselect = 1 << cdns_xspi->hw_num_banks;
+ host->mem_caps = &cdns_xspi_mem_caps;
ret = devm_spi_register_controller(dev, host);
if (ret) {
--
2.47.3
next prev parent reply other threads:[~2026-10-14 15:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-14 15:42 [PATCH v3 0/7] spi: Add support for panic mem writes Paul Cercueil
2026-10-14 15:42 ` [PATCH v3 1/7] spi: spi-mem: " Paul Cercueil
2026-10-14 15:42 ` [PATCH v3 2/7] mtd: spi-nor: Wait for NOR ready with poll_timeout_us() Paul Cercueil
2026-10-14 15:42 ` [PATCH v3 3/7] mtd: spi-nor: Add support for panic writes Paul Cercueil
2026-10-14 15:42 ` [PATCH v3 4/7] spi: cadence-xspi: Clear "SDMA ready" IRQ flag after polling Paul Cercueil
2026-10-14 15:42 ` [PATCH v3 5/7] spi: cadence-xspi: Add irq-less support Paul Cercueil
2026-10-14 15:43 ` Paul Cercueil [this message]
2026-10-14 15:43 ` [PATCH v3 7/7] spi: dt-bindings: cadence: Make XSPI's IRQ line optional Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261014154301.157755-7-paul.cercueil@bootlin.com \
--to=paul.cercueil@bootlin.com \
--cc=bbhushan2@marvell.com \
--cc=broonie@kernel.org \
--cc=gpiccoli@igalia.com \
--cc=kees@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=sgoutham@marvell.com \
--cc=takahiro.kuwano@infineon.com \
--cc=tanmay@marvell.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tony.luck@intel.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®