[PATCH v2 3/6] arm64: dts: qcom: glymur: Add camera MCLK pinctrl

[Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>]

Add pinctrl definitions for camera master clock pins on Glymur.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur.dtsi | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index fce3651c47f403e01ffc2a44d6d04a4abba1f310..e38a3cf5c9ea27e34f1ce312800965fac640b57c 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -7148,6 +7148,41 @@ rx-pins {
 				};
 			};
 
+			cam_mclk0_default: cam-mclk0-default-state {
+				pins = "gpio96";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk1_default: cam-mclk1-default-state {
+				pins = "gpio97";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk2_default: cam-mclk2-default-state {
+				pins = "gpio98";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk3_default: cam-mclk3-default-state {
+				pins = "gpio99";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk4_default: cam-mclk4-default-state {
+				pins = "gpio100";
+				function = "cam_asc_mclk4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			cci0_0_default: cci0-0-default-state {
 				sda-pins {
 					pins = "gpio101";

-- 
2.34.1