mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
	 Jai Luthra <jai.luthra@ideasonboard.com>,
	 Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	 Alexander Shiyan <eagle.alexander923@gmail.com>,
	 linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	 devicetree@vger.kernel.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v4 14/16] media: sony-starvis2: Only update bits for window mode
Date: Thu, 15 Oct 2026 16:57:40 +0100	[thread overview]
Message-ID: <20261015-media-starvis2-v4-14-75fcdb4163f3@raspberrypi.com> (raw)
In-Reply-To: <20261015-media-starvis2-v4-0-75fcdb4163f3@raspberrypi.com>

IMX585 requires bit 4 of the WINMODE register (0x3018) to be
set, whilst the bottom nibble selects between all-pixel and
window mode.

Switch to using cci_update_bits so that only the bottom nibble
is updated, thereby working on all supported Starvis2 sensors.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/sony-starvis2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/sony-starvis2.c b/drivers/media/i2c/sony-starvis2.c
index 1dec5d923077..8585f5c93dc2 100644
--- a/drivers/media/i2c/sony-starvis2.c
+++ b/drivers/media/i2c/sony-starvis2.c
@@ -88,6 +88,7 @@
 
 /* Crop */
 #define STARVIS2_REG_WINMODE		CCI_REG8(0x3018)
+#define STARVIS2_REG_WINMODE_MASK	0x0f
 #define STARVIS2_REG_PIX_HST		CCI_REG16_LE(0x303c)
 #define STARVIS2_REG_PIX_HWIDTH		CCI_REG16_LE(0x303e)
 #define STARVIS2_REG_PIX_VST		CCI_REG16_LE(0x3044)
@@ -1458,7 +1459,8 @@ static int starvis2_program_window(struct starvis2 *starvis2,
 	int ret = 0;
 
 	cci_write(starvis2->cci, STARVIS2_REG_ADDMODE, 0x00, &ret);
-	cci_write(starvis2->cci, STARVIS2_REG_WINMODE, 0x04, &ret);
+	cci_update_bits(starvis2->cci, STARVIS2_REG_WINMODE,
+			STARVIS2_REG_WINMODE_MASK, 0x04, &ret);
 	cci_write(starvis2->cci, STARVIS2_REG_PIX_HST,
 		  crop->left - starvis2->variant->active_area.left, &ret);
 	cci_write(starvis2->cci, STARVIS2_REG_PIX_HWIDTH, crop->width, &ret);

-- 
2.34.1


  parent reply	other threads:[~2026-10-15 15:57 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-15 15:57 [PATCH v4 00/16] Update imx678 to act as a common Sony Starvis 2 driver Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 01/16] media: imx678: Rework into generic Starvis 2 sensor driver Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 02/16] media: sony-starvis2: Reorder link frequencies to remove lookup Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 03/16] media: sony-starvis2: Always program the sensor in window mode Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 04/16] media: sony-starvis2: Parameterise the configuration to allow for other models Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 05/16] media: sony-starvis2: Rework 2 lane support for higher link freqs Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 06/16] media: sony-starvis2: Allow runtime control of link frequency Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 07/16] media: sony-starvis2: Correct the exposure range Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 08/16] media: sony-starvis2: Put module into standby after identify Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 09/16] media: sony-starvis2: Use pm_runtime_autosuspend Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 10/16] media: dt-bindings: sony,imx678: Add other Starvis 2 family members Dave Stevenson
2026-10-15 20:17   ` Rob Herring
2026-10-15 15:57 ` [PATCH v4 11/16] media: sony-starvis2: Add support for IMX662 Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 12/16] media: sony-starvis2: Add support for IMX675 Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 13/16] media: sony-starvis2: Add support for IMX832 Dave Stevenson
2026-10-15 15:57 ` Dave Stevenson [this message]
2026-10-15 15:57 ` [PATCH v4 15/16] media: sony-starvis2: Parameterise exposure min and step Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 16/16] media: sony-starvis2: Add support for IMX585 Dave Stevenson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261015-media-starvis2-v4-14-75fcdb4163f3@raspberrypi.com \
    --to=dave.stevenson@raspberrypi.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eagle.alexander923@gmail.com \
    --cc=jai.luthra@ideasonboard.com \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®