From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
Jai Luthra <jai.luthra@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Alexander Shiyan <eagle.alexander923@gmail.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v4 15/16] media: sony-starvis2: Parameterise exposure min and step
Date: Thu, 15 Oct 2026 16:57:41 +0100 [thread overview]
Message-ID: <20261015-media-starvis2-v4-15-75fcdb4163f3@raspberrypi.com> (raw)
In-Reply-To: <20261015-media-starvis2-v4-0-75fcdb4163f3@raspberrypi.com>
All the Starvis2 sensors supported to this point have specified
the range for the SHR (exposure) register as being 4 to
(number of line per frame -1).
Newer sensors are deviating from that, so parameterise
these into the sensor variant, replacing STARVIS2_EXPOSURE_MIN,
STARVIS2_EXPOSURE_STEP, and STARVIS2_SHR_MIN.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/i2c/sony-starvis2.c | 37 ++++++++++++++++++++++++++-----------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/media/i2c/sony-starvis2.c b/drivers/media/i2c/sony-starvis2.c
index 8585f5c93dc2..5f360f557671 100644
--- a/drivers/media/i2c/sony-starvis2.c
+++ b/drivers/media/i2c/sony-starvis2.c
@@ -67,11 +67,8 @@
/* SHR internal */
#define STARVIS2_REG_SHR CCI_REG24_LE(0x3050)
-#define STARVIS2_SHR_MIN 4
/* Exposure control */
-#define STARVIS2_EXPOSURE_MIN 1
-#define STARVIS2_EXPOSURE_STEP 1
#define STARVIS2_EXPOSURE_DEFAULT 1000
/*
@@ -640,6 +637,9 @@ struct starvis2_variant {
unsigned int vmax_default;
const u16 *hmax_min_link_freq;
u16 hmax_min_pixel_array;
+ unsigned int exposure_min;
+ unsigned int exposure_step;
+ unsigned int shr_min;
};
static const struct starvis2_variant imx678_variant_def = {
@@ -666,6 +666,9 @@ static const struct starvis2_variant imx678_variant_def = {
.vmax_default = 2250,
.hmax_min_link_freq = imx678_min_hmax_2lane,
.hmax_min_pixel_array = 550,
+ .exposure_min = 1,
+ .exposure_step = 1,
+ .shr_min = 4,
};
static const struct cci_reg_sequence imx662_common_regs[] = {
@@ -796,6 +799,9 @@ static const struct starvis2_variant imx662_variant_def = {
.vmax_default = 1136,
.hmax_min_link_freq = imx662_min_hmax_2lane,
.hmax_min_pixel_array = 990,
+ .exposure_min = 1,
+ .exposure_step = 1,
+ .shr_min = 4,
};
static const struct cci_reg_sequence imx675_common_regs[] = {
@@ -983,6 +989,9 @@ static const struct starvis2_variant imx675_variant_def = {
.vmax_default = 2024,
.hmax_min_link_freq = imx675_min_hmax_2lane,
.hmax_min_pixel_array = 528,
+ .exposure_min = 1,
+ .exposure_step = 1,
+ .shr_min = 4,
};
static const struct cci_reg_sequence imx832_common_regs[] = {
@@ -1076,6 +1085,9 @@ static const struct starvis2_variant imx832_variant_def = {
.vmax_default = 1136,
.hmax_min_link_freq = imx832_min_hmax_2lane,
.hmax_min_pixel_array = 990,
+ .exposure_min = 1,
+ .exposure_step = 1,
+ .shr_min = 4,
};
struct starvis2_model_info {
@@ -1247,12 +1259,15 @@ static int starvis2_set_ctrl(struct v4l2_ctrl *ctrl)
starvis2->vmax = format->height + ctrl->val;
current_exposure = clamp_t(u32, current_exposure,
- STARVIS2_EXPOSURE_MIN,
- starvis2->vmax - STARVIS2_SHR_MIN);
+ starvis2->variant->exposure_min,
+ starvis2->vmax -
+ starvis2->variant->shr_min);
ret = __v4l2_ctrl_modify_range(starvis2->exposure,
- STARVIS2_EXPOSURE_MIN,
- starvis2->vmax - STARVIS2_SHR_MIN,
- 1, current_exposure);
+ starvis2->variant->exposure_min,
+ starvis2->vmax -
+ starvis2->variant->shr_min,
+ starvis2->variant->exposure_step,
+ current_exposure);
if (ret)
return ret;
}
@@ -1775,10 +1790,10 @@ static int starvis2_init_controls(struct starvis2 *starvis2)
starvis2->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &starvis2_ctrl_ops,
V4L2_CID_EXPOSURE,
- STARVIS2_EXPOSURE_MIN,
+ starvis2->variant->exposure_min,
starvis2->variant->vmax_default -
- STARVIS2_SHR_MIN,
- STARVIS2_EXPOSURE_STEP,
+ starvis2->variant->shr_min,
+ starvis2->variant->exposure_step,
STARVIS2_EXPOSURE_DEFAULT);
v4l2_ctrl_new_std(ctrl_hdlr, &starvis2_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
--
2.34.1
next prev parent reply other threads:[~2026-10-15 15:57 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 15:57 [PATCH v4 00/16] Update imx678 to act as a common Sony Starvis 2 driver Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 01/16] media: imx678: Rework into generic Starvis 2 sensor driver Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 02/16] media: sony-starvis2: Reorder link frequencies to remove lookup Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 03/16] media: sony-starvis2: Always program the sensor in window mode Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 04/16] media: sony-starvis2: Parameterise the configuration to allow for other models Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 05/16] media: sony-starvis2: Rework 2 lane support for higher link freqs Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 06/16] media: sony-starvis2: Allow runtime control of link frequency Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 07/16] media: sony-starvis2: Correct the exposure range Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 08/16] media: sony-starvis2: Put module into standby after identify Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 09/16] media: sony-starvis2: Use pm_runtime_autosuspend Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 10/16] media: dt-bindings: sony,imx678: Add other Starvis 2 family members Dave Stevenson
2026-10-15 20:17 ` Rob Herring
2026-10-15 15:57 ` [PATCH v4 11/16] media: sony-starvis2: Add support for IMX662 Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 12/16] media: sony-starvis2: Add support for IMX675 Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 13/16] media: sony-starvis2: Add support for IMX832 Dave Stevenson
2026-10-15 15:57 ` [PATCH v4 14/16] media: sony-starvis2: Only update bits for window mode Dave Stevenson
2026-10-15 15:57 ` Dave Stevenson [this message]
2026-10-15 15:57 ` [PATCH v4 16/16] media: sony-starvis2: Add support for IMX585 Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261015-media-starvis2-v4-15-75fcdb4163f3@raspberrypi.com \
--to=dave.stevenson@raspberrypi.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eagle.alexander923@gmail.com \
--cc=jai.luthra@ideasonboard.com \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®