From: Koichiro Den <den@valinux.co.jp>
To: "Marek Vasut" <marek.vasut+renesas@mailbox.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Magnus Damm" <magnus.damm@gmail.com>,
"Jingoo Han" <jingoohan1@gmail.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
Frank Li <Frank.Li@nxp.com>, Niklas Cassel <cassel@kernel.org>,
Wilfred Mallawa <wilfred.mallawa@wdc.com>,
Serge Semin <fancer.lancer@gmail.com>,
linux-pci@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 04/18] dt-bindings: PCI: rcar-gen4: Add optional "aer" interrupt for R-Car Gen4 SoCs
Date: Thu, 15 Oct 2026 12:30:49 +0900 [thread overview]
Message-ID: <20261015033103.3076869-5-den@valinux.co.jp> (raw)
In-Reply-To: <20261015033103.3076869-1-den@valinux.co.jp>
The intreq_pcim_lperr interrupt carries Root Port AER notifications,
separately from the integrated MSI receiver interrupt. Describe it with
the "aer" name so the controller driver can use it for Root Port error
reporting.
Keep the fifth interrupt optional on R-Car Gen4 SoCs so existing device
trees remain valid. Extend the example accordingly.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
---
Changes since v3:
- Rebase on Marek's Gen5 AER binding fix:
https://lore.kernel.org/r/20261003215710.792518-1-marek.vasut+renesas@mailbox.org/
This requires "aer" for the Gen5 SoC PCIe4 controller from the
beginning. Update the subject to clarify that it is optional only
on Gen4 SoCs, for compatibility with existing DTs.
- Drop R-b tags due to the changes.
v3: https://lore.kernel.org/r/20261006084638.3821710-5-den@valinux.co.jp/
.../devicetree/bindings/pci/rcar-gen4-pci-host.yaml | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
index 083b77d4de8f..a86c06701fa9 100644
--- a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
@@ -26,7 +26,8 @@ properties:
- const: renesas,rcar-gen5-pcie4 # R-Car Gen5 PCIe4
interrupts:
- maxItems: 4
+ minItems: 4
+ maxItems: 5
clocks:
maxItems: 2
@@ -93,11 +94,13 @@ allOf:
- const: config
interrupt-names:
+ minItems: 4
items:
- const: msi
- const: dma
- const: sft_ce
- const: app
+ - const: aer
- if:
properties:
compatible:
@@ -117,6 +120,9 @@ allOf:
- const: app
- const: config
+ interrupts:
+ maxItems: 4
+
interrupt-names:
items:
- const: msi
@@ -146,8 +152,9 @@ examples:
interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi", "dma", "sft_ce", "app";
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi", "dma", "sft_ce", "app", "aer";
clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
clock-names = "core", "ref";
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
--
2.54.0
next prev parent reply other threads:[~2026-10-15 3:31 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 3:30 [PATCH v4 00/18] PCI: rcar-gen4: Recover from link down and route Root Port interrupts Koichiro Den
2026-10-15 3:30 ` [PATCH v4 01/18] PCI: dwc: Add Renesas to the RAS DES VSEC list Koichiro Den
2026-10-15 3:30 ` [PATCH v4 02/18] PCI: dwc: Factor out the PORT_LINK_DEBUG1 link-up check Koichiro Den
2026-10-15 3:48 ` Shawn Lin
2026-10-17 12:12 ` Marek Vasut
2026-10-15 3:30 ` [PATCH v4 03/18] PCI: rcar-gen4: Check live link status in link_up() Koichiro Den
2026-10-15 3:30 ` Koichiro Den [this message]
2026-10-15 20:10 ` [PATCH v4 04/18] dt-bindings: PCI: rcar-gen4: Add optional "aer" interrupt for R-Car Gen4 SoCs Rob Herring (Arm)
2026-10-17 12:17 ` Marek Vasut
2026-10-19 2:31 ` Koichiro Den
2026-10-19 15:05 ` Marek Vasut
2026-10-15 3:30 ` [PATCH v4 05/18] PCI: dwc: Export dw_handle_msi_irq() Koichiro Den
2026-10-15 3:49 ` Shawn Lin
2026-10-15 3:30 ` [PATCH v4 06/18] PCI: rcar-gen4: Move deinitialization helpers before SoC initialization Koichiro Den
2026-10-15 3:30 ` [PATCH v4 07/18] PCI: rcar-gen4: Assert resets when Gen5 SoC PHY initialization fails Koichiro Den
2026-10-15 3:30 ` [PATCH v4 08/18] PCI: rcar-gen4: Separate hardware setup from resource acquisition Koichiro Den
2026-10-15 3:30 ` [PATCH v4 09/18] PCI: rcar-gen4: Add Root Port reset support Koichiro Den
2026-10-17 12:46 ` Marek Vasut
2026-10-19 3:01 ` Koichiro Den
2026-10-19 20:18 ` Marek Vasut
2026-10-15 3:30 ` [PATCH v4 10/18] PCI: dwc: Free the MSI domain after the host .deinit() callback Koichiro Den
2026-10-17 12:59 ` Marek Vasut
2026-10-15 3:30 ` [PATCH v4 11/18] PCI: rcar-gen4: Take over the iMSI-RX interrupt Koichiro Den
2026-10-17 13:07 ` Marek Vasut
2026-10-15 3:30 ` [PATCH v4 12/18] PCI: rcar-gen4: Recover the Root Port on link down Koichiro Den
2026-10-17 13:15 ` Marek Vasut
2026-10-15 3:30 ` [PATCH v4 13/18] PCI: dwc: Let glue drivers hide the Root Port MSI capabilities Koichiro Den
2026-10-15 4:11 ` Shawn Lin
2026-10-15 7:17 ` Koichiro Den
2026-10-15 3:30 ` [PATCH v4 14/18] PCI: rcar-gen4: Route Root Port AER to a virtual Root Port IRQ Koichiro Den
2026-10-17 14:27 ` Marek Vasut
2026-10-15 3:31 ` [PATCH v4 15/18] PCI: rcar-gen4: Route Root Port PME and bandwidth notifications Koichiro Den
2026-10-15 3:31 ` [PATCH v4 16/18] arm64: dts: renesas: r8a779f0: Describe the PCIe AER interrupts Koichiro Den
2026-10-15 3:31 ` [PATCH v4 17/18] arm64: dts: renesas: r8a779g0: " Koichiro Den
2026-10-17 13:24 ` Marek Vasut
2026-10-15 3:31 ` [PATCH v4 18/18] arm64: dts: renesas: r8a779h0: Describe the PCIe AER interrupt Koichiro Den
2026-10-17 13:24 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261015033103.3076869-5-den@valinux.co.jp \
--to=den@valinux.co.jp \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=geert+renesas@glider.be \
--cc=jingoohan1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mani@kernel.org \
--cc=marek.vasut+renesas@mailbox.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=wilfred.mallawa@wdc.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®