[PATCH v3 4/6] phy: qcom-mipi-csi2: Add lane mask and lane polarity helpers

[George Neacsu via B4 Relay <devnull+geocausa.gmail.com@kernel.org>]

From: George Neacsu <geocausa@gmail.com>

Move the CTRL5 lane mask and the CTRL9 lane polarity writes out of
phy_qcom_mipi_csi2_lanes_enable() into two helpers,
phy_qcom_mipi_csi2_lane_mask() and
phy_qcom_mipi_csi2_dphy_lane_polarities(). A C-PHY path needs a
different lane mask and no polarities, and with the helpers it can be
added without a goto or a second copy of the common setup.

No functional change.

Suggested-by: Bryan O'Donoghue <bod@kernel.org>
Suggested-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: George Neacsu <geocausa@gmail.com>
---
 drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c | 64 ++++++++++++++--------
 1 file changed, 42 insertions(+), 22 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
index b2d4ec3e81..a44e104301 100644
--- a/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
+++ b/drivers/phy/qualcomm/phy-qcom-mipi-csi2-3ph-dphy.c
@@ -268,34 +268,32 @@ phy_qcom_mipi_csi2_gen2_config_lanes(struct mipi_csi2phy_device *csi2phy,
 	}
 }
 
-static int phy_qcom_mipi_csi2_lanes_enable(struct mipi_csi2phy_device *csi2phy,
-					   struct mipi_csi2phy_stream_cfg *cfg)
+/*
+ * CSI_COMMON_CTRL5 is a physical lane power-up bitmap:
+ * - Bits [0,2,4,6] → D-PHY data lanes(LN0, LN2, LN4, LN6)
+ * - Bits [1,3,5] → C-PHY trio lanes(LN1, LN3, LN5)
+ * - Bit [7] → D-PHY clock lane(LNCK) dedicated clock enable
+ */
+static u8 phy_qcom_mipi_csi2_lane_mask(struct mipi_csi2phy_device *csi2phy,
+				       struct mipi_csi2phy_stream_cfg *cfg)
 {
-	const struct mipi_csi2phy_device_regs *regs = csi2phy_dev_to_regs(csi2phy);
 	struct mipi_csi2phy_lanes_cfg *lane_cfg = &cfg->lane_cfg;
-	u8 settle_cnt;
-	u8 val;
+	u8 lane_mask;
 	int i;
 
-	if (cfg->link_freq <= 0)
-		return -EINVAL;
-
-	settle_cnt = phy_qcom_mipi_csi2_settle_cnt_calc(cfg->link_freq, csi2phy->timer_clk_rate);
-	if (!settle_cnt)
-		return -ENODEV;
-
-	/*
-	 * CSI_COMMON_CTRL5 is a physical lane power-up bitmap:
-	 * - Bits [0,2,4,6] → D-PHY data lanes(LN0, LN2, LN4, LN6)
-	 * - Bits [1,3,5] → C-PHY trio lanes(LN1, LN3, LN5)
-	 * - Bit [7] → D-PHY clock lane(LNCK) dedicated clock enable
-	 */
-	val = BIT(lane_cfg->clk.pos);
+	lane_mask = BIT(lane_cfg->clk.pos);
 	for (i = 0; i < cfg->num_data_lanes; i++)
-		val |= BIT(lane_cfg->data[i].pos * 2);
+		lane_mask |= BIT(lane_cfg->data[i].pos * 2);
 
-	writel(val, csi2phy->base +
-	       CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(regs->common_regs_offset, 5));
+	return lane_mask;
+}
+
+static void
+phy_qcom_mipi_csi2_dphy_lane_polarities(struct mipi_csi2phy_device *csi2phy,
+					struct mipi_csi2phy_stream_cfg *cfg)
+{
+	struct mipi_csi2phy_lanes_cfg *lane_cfg = &cfg->lane_cfg;
+	int i;
 
 	/* Lane configuration for polarity @ CSIPHY-base + CTRL9 */
 	for (i = 0; i < cfg->num_data_lanes; i++) {
@@ -308,6 +306,28 @@ static int phy_qcom_mipi_csi2_lanes_enable(struct mipi_csi2phy_device *csi2phy,
 
 	if (lane_cfg->clk.pol)
 		writel(BIT(2), csi2phy->base + CSIPHY_2PH_LN_CSI_2PHASE_CTRL9n(lane_cfg->clk.pos));
+}
+
+static int phy_qcom_mipi_csi2_lanes_enable(struct mipi_csi2phy_device *csi2phy,
+					   struct mipi_csi2phy_stream_cfg *cfg)
+{
+	const struct mipi_csi2phy_device_regs *regs = csi2phy_dev_to_regs(csi2phy);
+	u8 settle_cnt;
+	u8 val;
+	int i;
+
+	if (cfg->link_freq <= 0)
+		return -EINVAL;
+
+	settle_cnt = phy_qcom_mipi_csi2_settle_cnt_calc(cfg->link_freq, csi2phy->timer_clk_rate);
+	if (!settle_cnt)
+		return -ENODEV;
+
+	val = phy_qcom_mipi_csi2_lane_mask(csi2phy, cfg);
+	writel(val, csi2phy->base +
+	       CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(regs->common_regs_offset, 5));
+
+	phy_qcom_mipi_csi2_dphy_lane_polarities(csi2phy, cfg);
 
 	val = CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_COMMON_PWRDN_B;
 	writel(val, csi2phy->base +

-- 
2.53.0