[PATCH v2 0/3] Enable USB and SD for Deepcomputing FML13V05 board

[PATCH v2 0/3] Enable USB and SD for Deepcomputing FML13V05 board

[Sandie Cao]

This series updates Deepcomputing FML13V05 Device Tree: Add P1 PMIC 
regulator tree, add USB controller and USB phy, Enable SD card.

This series is based on next-20261016.

---
Changes in v2:
- Remove usb3b, usb3c node define in k3.dtsi, it's already uploaded by 
other patch.
- Add phys and phys-name define for usb3b, usb3c, usb3d in 
k3-deepcomputing-fml13v05.
- Remove cd-gpios, use non-removable for sdhci0. 
- Remove vmmc-supply for sdhci0.
- Link to v1: https://lore.kernel.org/all/20260922110231.3426011-1-
sandie.cao@deepcomputing.io/

---

Sandie Cao (3):
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator
    tree
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller
    and USB phy support
  riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card
    support

 .../spacemit/k3-deepcomputing-fml13v05.dts    | 223 ++++++++++++++++++
 1 file changed, 223 insertions(+)


base-commit: 2efb7a11f1aa4d2dc285fe2680cca22cb9f72f64
-- 
2.43.0

[PATCH v2 1/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add P1 PMIC regulator tree

[Sandie Cao]

Add the P1 PMIC's regulator topology tree for DeepComputing FML13V05 board

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../spacemit/k3-deepcomputing-fml13v05.dts    | 155 ++++++++++++++++++
 1 file changed, 155 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index b5d5112de358..804abc85602a 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -22,6 +22,161 @@ memory@100000000 {
 		device_type = "memory";
 		reg = <0x1 0x00000000 0x4 0x00000000>;
 	};
+
+	reg_aux_vcc3v3: regulator-aux-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "AUX_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_aux_vcc5v: regulator-aux-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AUX_VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_cfg>;
+	status = "okay";
+
+	p1@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+		vin1-supply = <&reg_aux_vcc5v>;
+		vin2-supply = <&reg_aux_vcc5v>;
+		vin3-supply = <&reg_aux_vcc5v>;
+		vin4-supply = <&reg_aux_vcc5v>;
+		vin5-supply = <&reg_aux_vcc5v>;
+		vin6-supply = <&reg_aux_vcc5v>;
+		aldoin-supply = <&reg_aux_vcc5v>;
+		dldoin1-supply = <&buck4>;
+		dldoin2-supply = <&buck4>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2: buck2 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3: buck3 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6: buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <500000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1: aldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			aldo3: aldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo4: aldo4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo1: dldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo2: dldo2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo3: dldo3 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo4: dldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			dldo5: dldo5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo6: dldo6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			dldo7: dldo7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
 };
 
 &uart0 {
-- 
2.43.0

[PATCH v2 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support

[Sandie Cao]

Add USB device node (b, c, d) to DeepComputing FML13V05 board.
USB A works on otg mode, it isn't configured currently.
- 4 USB-C Ports
     - Port 1: PD 3.0 (65W Max), USB 3.2 Gen 1
     - Port 2: PD 3.0 (65W Max), USB 3.2 Gen 1, DP 1.4 (4K@60Hz)
     - Port 3 & 4: USB 3.2 Gen 1

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../spacemit/k3-deepcomputing-fml13v05.dts    | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index 804abc85602a..84f66dd8f962 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -179,8 +179,58 @@ dldo7: dldo7 {
 	};
 };
 
+&combophy {
+	spacemit,apmu = <&syscon_apmu 0x17>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_0_cfg>;
 	status = "okay";
 };
+
+&usb2_host {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,608";
+		reg = <1>;
+	};
+};
+
+&usb2_phy {
+	status = "okay";
+};
+
+&usb3b_u2phy {
+	status = "okay";
+};
+
+&usb3b {
+	phys = <&usb3b_u2phy>, <&combophy 2 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
+
+&usb3c_u2phy {
+	status = "okay";
+};
+
+&usb3c {
+	phys = <&usb3c_u2phy>, <&combophy 3 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
+
+&usb3d_u2phy {
+	status = "okay";
+};
+
+&usb3d {
+	phys = <&usb3d_u2phy>, <&combophy 4 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+	status = "okay";
+};
-- 
2.43.0

[PATCH v2 3/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: Enable SD card support

[Sandie Cao]

Add the device tree node SDHCI-0 controller for Micro SD card slot.

Signed-off-by: Sandie Cao <sandie.cao@deepcomputing.io>
---
 .../dts/spacemit/k3-deepcomputing-fml13v05.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
index 84f66dd8f962..09e3d46a2ea3 100644
--- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
+++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2026 DeepComputing (HK) Limited
  */
+#include <dt-bindings/gpio/gpio.h>
 
 #include "k3.dtsi"
 #include "k3-pinctrl.dtsi"
@@ -184,6 +185,23 @@ &combophy {
 	status = "okay";
 };
 
+&sdhci0 {
+	pinctrl-names = "default","uhs";
+	pinctrl-0 = <&mmc1_cfg>;
+	pinctrl-1 = <&mmc1_uhs_cfg>;
+	bus-width = <4>;
+	non-removable;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	cap-sd-highspeed;
+	vqmmc-supply = <&aldo1>;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_0_cfg>;
-- 
2.43.0