[PATCH 3/6] arm64: dts: qcom: talos-lyra-evk: Add RPi 7-inch DSI panel overlay

[anand.tiwari@oss.qualcomm.com]

From: Shashank Maurya <shashank.maurya@oss.qualcomm.com>

Add a DT overlay to enable Raspberry Pi 7-inch DSI panel connected
to DSI 22pin on the carrier card.

DSI0 from SOC is routed through MUX which can be selected by DIP
switch S1016.5 ON for enabling this 22pin connector.

Add the regulator and backlight controller at I2C2 address 0x45,
Goodix GT911 touch controller, panel power and reset control, and
a 2-lane DSI connection.

Disable the default HDMI bridge and connector in favour of the RPi
DSI panel.

Signed-off-by: Shashank Maurya <shashank.maurya@oss.qualcomm.com>
Signed-off-by: Anand Tiwari <anand.tiwari@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  5 ++
 .../qcom/talos-lyra-evk-raspberrypi-dsi-7inch.dtso | 88 ++++++++++++++++++++++
 2 files changed, 93 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5248b6be68f5..a2a2ffbbce3a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -480,6 +480,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= talos-evk-rpi-display-2-5in.dtb
 talos-lyra-evk-dlc0697-dtbs := talos-lyra-evk.dtb talos-lyra-evk-dlc0697.dtbo
 dtb-$(CONFIG_ARCH_QCOM)     += talos-lyra-evk-dlc0697.dtb
 dtb-$(CONFIG_ARCH_QCOM)     += talos-lyra-evk-dlc0697.dtbo
+
+talos-lyra-evk-raspberrypi-dsi-7inch-dtbs := \
+        talos-lyra-evk.dtb talos-lyra-evk-raspberrypi-dsi-7inch.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk-raspberrypi-dsi-7inch.dtb
+dtb-$(CONFIG_ARCH_QCOM) += talos-lyra-evk-raspberrypi-dsi-7inch.dtbo
 x1e001de-devkit-el2-dtbs	:= x1e001de-devkit.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e001de-devkit.dtb x1e001de-devkit-el2.dtb
 x1e78100-lenovo-thinkpad-t14s-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/talos-lyra-evk-raspberrypi-dsi-7inch.dtso b/arch/arm64/boot/dts/qcom/talos-lyra-evk-raspberrypi-dsi-7inch.dtso
new file mode 100644
index 000000000000..cee602a78322
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/talos-lyra-evk-raspberrypi-dsi-7inch.dtso
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	display_bl: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_display>;
+		pwms = <&mcu 0 255 0>;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "rpi-display";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_dsi_touch: regulator-dsi-touch {
+		compatible = "regulator-fixed";
+		gpio = <&mcu 1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "rpi-touch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+	};
+};
+
+&hdmi_bridge {
+	status = "disabled";
+};
+
+&hdmi_connector {
+	status = "disabled";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mcu: gpio@45 {
+		compatible = "raspberrypi,touchscreen-panel-regulator-v2";
+		reg = <0x45>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#pwm-cells = <3>;
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_dsi_touch>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&mdss_dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel@0 {
+		compatible = "raspberrypi,dsi-7inch";
+		reg = <0>;
+
+		reset-gpios = <&mcu 0 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_display>;
+		iovcc-supply = <&vreg_s4a>;
+		backlight = <&display_bl>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1>;
+};

-- 
2.55.0