[PATCH v2 0/3] iio: proximity: sx93xx: keep the IRQ balanced across suspend and resume

[PATCH v2 0/3] iio: proximity: sx93xx: keep the IRQ balanced across suspend and resume

[Arnav Kapoor]

sx9310, sx9324 and sx9360 disable the interrupt in suspend before
anything that can fail, and don't enable it again when suspend or resume
fails. Without an interrupt line they also act on IRQ 0. One patch per
driver, as the Fixes tags differ.

Changes in v2:
- Send as a series with a cover letter (Joshua)
- sx9310: move the wake-up register writes into a helper that uses
  guard(), so resume can use the usual early returns (Andy)
- sx9324, sx9360: no changes

v1:
https://lore.kernel.org/all/20261026100322.16720-1-kapoorarnav43@gmail.com/
https://lore.kernel.org/all/20261026100408.16874-1-kapoorarnav43@gmail.com/
https://lore.kernel.org/all/20261026100450.17023-1-kapoorarnav43@gmail.com/

Compile-tested only (W=1); I don't have the hardware and haven't
reproduced a failing suspend.

Arnav Kapoor (3):
  iio: proximity: sx9310: keep the IRQ balanced across suspend and
    resume
  iio: proximity: sx9324: keep the IRQ balanced across suspend and
    resume
  iio: proximity: sx9360: keep the IRQ balanced across suspend and
    resume

 drivers/iio/proximity/sx9310.c | 41 ++++++++++++++++++++++------------
 drivers/iio/proximity/sx9324.c | 31 +++++++++++++++----------
 drivers/iio/proximity/sx9360.c | 33 ++++++++++++++++-----------
 3 files changed, 66 insertions(+), 39 deletions(-)


base-commit: 2ef6f5c4ee56e90c237c5f7687f09e635f7d30a9
-- 
2.53.0

[PATCH v2 1/3] iio: proximity: sx9310: keep the IRQ balanced across suspend and resume

[Arnav Kapoor]

sx9310_suspend() disables the interrupt first and returns with it still
disabled if a register access fails. Resume isn't called after a failed
suspend, so the interrupt is never enabled again. sx9310_resume() also
returns without enabling it on error. Without an interrupt line,
client->irq is 0 and both callbacks act on IRQ 0, which the driver
doesn't own.

Disable the interrupt only once the device is asleep, always enable it
in resume, and skip both when there is no interrupt.

Fixes: 72ad02b15d63 ("iio: Add SEMTECH SX9310/9311 sensor driver")
Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com>
---
 drivers/iio/proximity/sx9310.c | 41 ++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 79ba46d8a0aa..fad1dcffbe26 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -943,8 +943,6 @@ static int sx9310_suspend(struct device *dev)
 	u8 ctrl0;
 	int ret;
 
-	disable_irq_nosync(data->client->irq);
-
 	guard(mutex)(&data->mutex);
 	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
 			  &data->suspend_ctrl);
@@ -956,7 +954,28 @@ static int sx9310_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
-	return regmap_write(data->regmap, SX9310_REG_PAUSE, 0);
+	ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0);
+	if (ret)
+		return ret;
+
+	/* Only once nothing can fail, as resume isn't called on failure. */
+	if (data->client->irq)
+		disable_irq_nosync(data->client->irq);
+
+	return 0;
+}
+
+static int sx9310_wake_up(struct sx_common_data *data)
+{
+	int ret;
+
+	guard(mutex)(&data->mutex);
+	ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
+	if (ret)
+		return ret;
+
+	return regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
+			    data->suspend_ctrl);
 }
 
 static int sx9310_resume(struct device *dev)
@@ -964,19 +983,13 @@ static int sx9310_resume(struct device *dev)
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
 	int ret;
 
-	scoped_guard(mutex, &data->mutex) {
-		ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
-		if (ret)
-			return ret;
+	ret = sx9310_wake_up(data);
 
-		ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
-				   data->suspend_ctrl);
-		if (ret)
-			return ret;
-	}
+	/* Balance the suspend even if the device couldn't be woken up. */
+	if (data->client->irq)
+		enable_irq(data->client->irq);
 
-	enable_irq(data->client->irq);
-	return 0;
+	return ret;
 }
 
 static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume);
-- 
2.53.0

Re: [PATCH v2 1/3] iio: proximity: sx9310: keep the IRQ balanced across suspend and resume

[Andy Shevchenko]

On Mon, Oct 26, 2026 at 04:53:04PM +0530, Arnav Kapoor wrote:
> sx9310_suspend() disables the interrupt first and returns with it still
> disabled if a register access fails. Resume isn't called after a failed
> suspend, so the interrupt is never enabled again. sx9310_resume() also
> returns without enabling it on error. Without an interrupt line,
> client->irq is 0 and both callbacks act on IRQ 0, which the driver
> doesn't own.
> 
> Disable the interrupt only once the device is asleep, always enable it
> in resume, and skip both when there is no interrupt.

...

> +static int sx9310_wake_up(struct sx_common_data *data)
> +{
> +	int ret;
> +
> +	guard(mutex)(&data->mutex);

Add a blank line here.

*Yes, I saw other guard()() calls without blank lines in this file,
 but that can be addressed afterwards)

> +	ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
> +	if (ret)
> +		return ret;
> +
> +	return regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
> +			    data->suspend_ctrl);

With

	struct regmap *map = data->regmap;

at the top of the function these become

	ret = regmap_write(map, SX9310_REG_PAUSE, 1);
	if (ret)
		return ret;

	return regmap_write(map, SX9310_REG_PROX_CTRL0, data->suspend_ctrl);

>  }

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 2/3] iio: proximity: sx9324: keep the IRQ balanced across suspend and resume

[Arnav Kapoor]

sx9324_suspend() disables the interrupt first and returns with it still
disabled if a register access fails. Resume isn't called after a failed
suspend, so the interrupt is never enabled again. sx9324_resume() also
returns without enabling it on error. Without an interrupt line,
client->irq is 0 and both callbacks act on IRQ 0, which the driver
doesn't own.

Disable the interrupt only once the device is asleep, always enable it
in resume, and skip both when there is no interrupt.

Fixes: 4c18a890dff8 ("iio:proximity:sx9324: Add SX9324 support")
Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com>
---
 drivers/iio/proximity/sx9324.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
index 255a36976ac4..ced415747a98 100644
--- a/drivers/iio/proximity/sx9324.c
+++ b/drivers/iio/proximity/sx9324.c
@@ -1088,8 +1088,6 @@ static int sx9324_suspend(struct device *dev)
 	unsigned int regval;
 	int ret;
 
-	disable_irq_nosync(data->client->irq);
-
 	guard(mutex)(&data->mutex);
 	ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL1, &regval);
 	if (ret < 0)
@@ -1100,23 +1098,32 @@ static int sx9324_suspend(struct device *dev)
 
 
 	/* Disable all phases, send the device to sleep. */
-	return regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0);
+	ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0);
+	if (ret)
+		return ret;
+
+	/* Only once nothing can fail, as resume isn't called on failure. */
+	if (data->client->irq)
+		disable_irq_nosync(data->client->irq);
+
+	return 0;
 }
 
 static int sx9324_resume(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
 
-	scoped_guard(mutex, &data->mutex) {
-		int ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1,
-				       data->suspend_ctrl |
-				       SX9324_REG_GNRL_CTRL1_PAUSECTRL);
-		if (ret)
-			return ret;
-	}
+	scoped_guard(mutex, &data->mutex)
+		ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1,
+				   data->suspend_ctrl |
+				   SX9324_REG_GNRL_CTRL1_PAUSECTRL);
 
-	enable_irq(data->client->irq);
-	return 0;
+	/* Balance the suspend even if the device couldn't be woken up. */
+	if (data->client->irq)
+		enable_irq(data->client->irq);
+
+	return ret;
 }
 
 static DEFINE_SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume);
-- 
2.53.0

[PATCH v2 3/3] iio: proximity: sx9360: keep the IRQ balanced across suspend and resume

[Arnav Kapoor]

sx9360_suspend() disables the interrupt first and returns with it still
disabled if a register access fails. Resume isn't called after a failed
suspend, so the interrupt is never enabled again. sx9360_resume() also
returns without enabling it on error. Without an interrupt line,
client->irq is 0 and both callbacks act on IRQ 0, which the driver
doesn't own.

Disable the interrupt only once the device is asleep, always enable it
in resume, and skip both when there is no interrupt.

Fixes: 1cdb4c47f7f5 ("iio:proximity:sx9360: Add sx9360 support")
Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com>
---
 drivers/iio/proximity/sx9360.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c
index ed83d809ecf5..85b83d86a433 100644
--- a/drivers/iio/proximity/sx9360.c
+++ b/drivers/iio/proximity/sx9360.c
@@ -797,8 +797,6 @@ static int sx9360_suspend(struct device *dev)
 	unsigned int regval;
 	int ret;
 
-	disable_irq_nosync(data->client->irq);
-
 	guard(mutex)(&data->mutex);
 	ret = regmap_read(data->regmap, SX9360_REG_GNRL_CTRL0, &regval);
 	if (ret < 0)
@@ -809,23 +807,32 @@ static int sx9360_suspend(struct device *dev)
 
 
 	/* Disable all phases, send the device to sleep. */
-	return regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0);
+	ret = regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0);
+	if (ret)
+		return ret;
+
+	/* Only once nothing can fail, as resume isn't called on failure. */
+	if (data->client->irq)
+		disable_irq_nosync(data->client->irq);
+
+	return 0;
 }
 
 static int sx9360_resume(struct device *dev)
 {
 	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
 
-	scoped_guard(mutex, &data->mutex) {
-		int ret = regmap_update_bits(data->regmap,
-					     SX9360_REG_GNRL_CTRL0,
-					     SX9360_REG_GNRL_CTRL0_PHEN_MASK,
-					     data->suspend_ctrl);
-		if (ret)
-			return ret;
-	}
-	enable_irq(data->client->irq);
-	return 0;
+	scoped_guard(mutex, &data->mutex)
+		ret = regmap_update_bits(data->regmap, SX9360_REG_GNRL_CTRL0,
+					 SX9360_REG_GNRL_CTRL0_PHEN_MASK,
+					 data->suspend_ctrl);
+
+	/* Balance the suspend even if the device couldn't be woken up. */
+	if (data->client->irq)
+		enable_irq(data->client->irq);
+
+	return ret;
 }
 
 static DEFINE_SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume);
-- 
2.53.0

Re: [PATCH v2 0/3] iio: proximity: sx93xx: keep the IRQ balanced across suspend and resume

[Joshua Crofts]

On Mon, 26 Oct 2026 16:53:03 +0530
Arnav Kapoor <kapoorarnav43@gmail.com> wrote:

> sx9310, sx9324 and sx9360 disable the interrupt in suspend before
> anything that can fail, and don't enable it again when suspend or resume
> fails. Without an interrupt line they also act on IRQ 0. One patch per
> driver, as the Fixes tags differ.
> 
> Changes in v2:
> - Send as a series with a cover letter (Joshua)
> - sx9310: move the wake-up register writes into a helper that uses
>   guard(), so resume can use the usual early returns (Andy)
> - sx9324, sx9360: no changes
> 
> v1:
> https://lore.kernel.org/all/20261026100322.16720-1-kapoorarnav43@gmail.com/
> https://lore.kernel.org/all/20261026100408.16874-1-kapoorarnav43@gmail.com/
> https://lore.kernel.org/all/20261026100450.17023-1-kapoorarnav43@gmail.com/
> 
> Compile-tested only (W=1); I don't have the hardware and haven't
> reproduced a failing suspend.

The code seems good, would be great if someone could test this.

Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>

-- 
Kind regards,
Joshua Crofts