[PATCH v1] ATA: ahci: Add Intel PCH-S RAID device ID

[PATCH v1] ATA: ahci: Add Intel PCH-S RAID device ID

[Roman Gardzinski]

Add support for SATA devices in RAID mode for Nova Lake.
No functional changes.

Suggested-by: Szczepan Durawa <szczepan.durawa@intel.com>
Reviewed-by: Szymon Durawa <szymon.durawa@linux.intel.com>
Signed-off-by: Roman Gardzinski <romanx.gardzinski@linux.intel.com>
---
 drivers/ata/ahci.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9b8c0935001c..c60e7ba24502 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -283,6 +283,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 		/* Comet Lake PCH-H RAID */
 		PCI_VDEVICE(INTEL, 0x06d6),
 		.driver_data = board_ahci_pcs_quirk,
+	}, {
+		/* Nova Lake PCH-S RAID */
+		PCI_VDEVICE(INTEL, 0x6e66),
+		.driver_data = board_ahci_pcs_quirk,
 	}, {
 		/* ICH6 */
 		PCI_VDEVICE(INTEL, 0x2652),
-- 
2.53.0

Re: [PATCH v1] ATA: ahci: Add Intel PCH-S RAID device ID

[Niklas Cassel]

Hello Roman,

On Tue, Oct 27, 2026 at 03:12:40PM +0100, Roman Gardzinski wrote:
> Add support for SATA devices in RAID mode for Nova Lake.
> No functional changes.
> 
> Suggested-by: Szczepan Durawa <szczepan.durawa@intel.com>
> Reviewed-by: Szymon Durawa <szymon.durawa@linux.intel.com>
> Signed-off-by: Roman Gardzinski <romanx.gardzinski@linux.intel.com>
> ---
>  drivers/ata/ahci.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index 9b8c0935001c..c60e7ba24502 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -283,6 +283,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
>  		/* Comet Lake PCH-H RAID */
>  		PCI_VDEVICE(INTEL, 0x06d6),
>  		.driver_data = board_ahci_pcs_quirk,
> +	}, {
> +		/* Nova Lake PCH-S RAID */
> +		PCI_VDEVICE(INTEL, 0x6e66),
> +		.driver_data = board_ahci_pcs_quirk,

Commit message should probably say something like:

When the Intel Nova Lake SATA controller is configured in RAID mode (rather
than AHCI), the generic entry in ahci_pci_tbl which matches any device with
the PCI class code for AHCI, is not sufficient, since the SATA controller
in RAID mode uses a different PCI class code.


Like Sashiko also said, please also check if this entry (for RAID mode)
should use board_ahci_pcs_quirk or board_ahci.


Kind regards,
Niklas