* [PATCH v3 1/5] dt-bindings: bus: add Broadcom BCM6362 WLAN AXI backplane
2026-11-03 23:30 [PATCH v3 0/5] bcma: support the BCM6362 integrated WLAN backplane Alessio Ferri
@ 2026-11-03 23:30 ` Alessio Ferri
2026-11-03 23:30 ` [PATCH v3 2/5] bcma: scan: support big-endian backplanes Alessio Ferri
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Alessio Ferri @ 2026-11-03 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Rafał Miłecki, Philipp Zabel, Florian Fainelli,
Broadcom internal kernel review list, Thomas Bogendoerfer,
Jonas Gorski
Cc: linux-wireless, devicetree, linux-kernel, linux-mips, Alessio Ferri
The BCM6362 integrates a WLAN macro on its own AXI backplane.
Unlike the backplanes covered by brcm,bus-axi, its cores have no
wrappers: clock gating and reset are driven through a separate
WLAN control register block, and the macro needs a clock, two
resets and the WLAN pads power domain before the backplane can be
accessed. The backplane registers are big-endian.
Add a binding describing the ChipCommon and WLAN control register
blocks, the clock, resets and power domain, and the interrupt-map
used to route core interrupts, following the brcm,bus-axi
convention.
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
---
.../bindings/bus/brcm,bcm6362-wlan-bus-axi.yaml | 109 +++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/Documentation/devicetree/bindings/bus/brcm,bcm6362-wlan-bus-axi.yaml b/Documentation/devicetree/bindings/bus/brcm,bcm6362-wlan-bus-axi.yaml
new file mode 100644
index 000000000000..c27efd719989
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,bcm6362-wlan-bus-axi.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/brcm,bcm6362-wlan-bus-axi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 integrated WLAN AXI backplane
+
+maintainers:
+ - Alessio Ferri <alessio.ferri@mythread.it>
+
+description: |
+ The BCM6362 integrates a WLAN macro on a dedicated AXI backplane
+ (bcma), whose cores are discovered at runtime from the backplane
+ EROM.
+
+ The cores have no DMP wrappers: clock gating and reset of the
+ ChipCommon and 802.11 cores are controlled through a separate WLAN
+ control register block. The backplane registers are big-endian.
+
+ Interrupts of the cores are described with an interrupt-map, as for
+ brcm,bus-axi: bcma looks up each core interrupt with the core base
+ address and the core interrupt index as key. The node has no child
+ nodes; #address-cells only sets the size of the address part of the
+ key.
+
+properties:
+ compatible:
+ const: brcm,bcm6362-wlan-bus-axi
+
+ reg:
+ items:
+ - description: ChipCommon core registers
+ - description: WLAN control registers
+
+ reg-names:
+ items:
+ - const: chipcommon
+ - const: wlan-ctrl
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: WLAN macro reset
+ - description: WLAN UBUS interface reset
+
+ reset-names:
+ items:
+ - const: wlan
+ - const: wlan-ubus
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-map-mask:
+ items:
+ - const: 0x000fffff
+ - const: 0xffff
+
+ interrupt-map:
+ description:
+ Interrupt of the 802.11 core, keyed by the low 20 bits of the core
+ base address and by the core interrupt index.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - resets
+ - reset-names
+ - power-domains
+ - "#address-cells"
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm6362-clock.h>
+ #include <dt-bindings/reset/bcm6362-reset.h>
+ #include <dt-bindings/soc/bcm6362-pm.h>
+
+ bus@10004000 {
+ compatible = "brcm,bcm6362-wlan-bus-axi";
+ reg = <0x10004000 0x1000>, <0x10007000 0x100>;
+ reg-names = "chipcommon", "wlan-ctrl";
+
+ #address-cells = <1>;
+ clocks = <&periph_clk BCM6362_CLK_WLAN_OCP>;
+ #interrupt-cells = <1>;
+ interrupt-map = <0x00005000 0 &periph_intc 7>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_WLAN_PADS>;
+ resets = <&periph_rst BCM6362_RST_WLAN_SHIM>,
+ <&periph_rst BCM6362_RST_WLAN_UBUS>;
+ reset-names = "wlan", "wlan-ubus";
+ };
--
2.56.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v3 2/5] bcma: scan: support big-endian backplanes
2026-11-03 23:30 [PATCH v3 0/5] bcma: support the BCM6362 integrated WLAN backplane Alessio Ferri
2026-11-03 23:30 ` [PATCH v3 1/5] dt-bindings: bus: add Broadcom BCM6362 WLAN AXI backplane Alessio Ferri
@ 2026-11-03 23:30 ` Alessio Ferri
2026-11-03 23:30 ` [PATCH v3 3/5] bcma: scan: accept wrapper-less cores on wrapper-less backplanes Alessio Ferri
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Alessio Ferri @ 2026-11-03 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Rafał Miłecki, Philipp Zabel, Florian Fainelli,
Broadcom internal kernel review list, Thomas Bogendoerfer,
Jonas Gorski
Cc: linux-wireless, devicetree, linux-kernel, linux-mips, Alessio Ferri
On some SoCs the bcma backplane is a big-endian peripheral, so the
ChipCommon ID/EROM pointer registers and the EROM itself read wrong
with readl().
Add a big_endian flag to struct bcma_bus, set by the host driver
before bcma_init_bus(), and use ioread32be() for scan-time accesses
when it is set. Core register accesses after the scan already go
through the host ops, which the host driver provides with the right
endianness.
Nothing changes for other devices.
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
---
drivers/bcma/scan.c | 4 +++-
include/linux/bcma/bcma.h | 3 +++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 84742408a59c..983a62ddeebb 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -143,6 +143,8 @@ static const char *bcma_device_name(const struct bcma_device_id *id)
static u32 bcma_scan_read32(struct bcma_bus *bus, u16 offset)
{
+ if (bus->big_endian)
+ return ioread32be(bus->mmio + offset);
return readl(bus->mmio + offset);
}
@@ -155,7 +157,7 @@ static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
{
- u32 ent = readl(*eromptr);
+ u32 ent = bus->big_endian ? ioread32be(*eromptr) : readl(*eromptr);
(*eromptr)++;
return ent;
}
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 17fc50190014..7ab2b21e7238 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -362,6 +362,9 @@ struct bcma_bus {
/* We decided to share SPROM struct with SSB as long as we do not need
* any hacks for BCMA. This simplifies drivers code. */
struct ssb_sprom sprom;
+
+ /* Backplane registers, EROM included, are big-endian */
+ bool big_endian;
};
static inline u32 bcma_read8(struct bcma_device *core, u16 offset)
--
2.56.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v3 3/5] bcma: scan: accept wrapper-less cores on wrapper-less backplanes
2026-11-03 23:30 [PATCH v3 0/5] bcma: support the BCM6362 integrated WLAN backplane Alessio Ferri
2026-11-03 23:30 ` [PATCH v3 1/5] dt-bindings: bus: add Broadcom BCM6362 WLAN AXI backplane Alessio Ferri
2026-11-03 23:30 ` [PATCH v3 2/5] bcma: scan: support big-endian backplanes Alessio Ferri
@ 2026-11-03 23:30 ` Alessio Ferri
2026-11-03 23:31 ` [PATCH v3 4/5] bcma: add host driver for the BCM6362 integrated WLAN backplane Alessio Ferri
2026-11-03 23:31 ` [PATCH v3 5/5] MIPS: dts: bcm6362: add the " Alessio Ferri
4 siblings, 0 replies; 6+ messages in thread
From: Alessio Ferri @ 2026-11-03 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Rafał Miłecki, Philipp Zabel, Florian Fainelli,
Broadcom internal kernel review list, Thomas Bogendoerfer,
Jonas Gorski
Cc: linux-wireless, devicetree, linux-kernel, linux-mips, Alessio Ferri
The scan drops every component that publishes no master or slave
wrapper in the EROM (NMW = NSW = 0), apart from a few known cores,
because without a wrapper bcma has no agent registers to gate and
crash. Since usually bcma is loaded early, it ends as a loop-crash.
Some backplanes, such as the integrated WLAN of the BCM6362, have
no wrappers on any core. ChipCommon and the 802.11 core are gated
through a SoC-level register block owned by the host driver, whose
aread32/awrite32 ops emulate the agent registers, and core 0x837
needs no gating.
Add a wrapperless flag to struct bcma_bus, set by the host driver
before bcma_init_bus(), and accept these cores without wrappers when
it is set. Other hosts keep rejecting them.
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
---
drivers/bcma/scan.c | 6 ++++++
include/linux/bcma/bcma.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index 983a62ddeebb..ef880b635971 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -318,6 +318,12 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
case BCMA_CORE_GCI:
/* Not used yet: case BCMA_CORE_OOB_ROUTER: */
break;
+ case BCMA_CORE_CHIPCOMMON:
+ case BCMA_CORE_80211:
+ case BCMA_CORE_SHIM:
+ if (bus->wrapperless)
+ break;
+ fallthrough;
default:
bcma_erom_skip_component(bus, eromptr);
return -ENXIO;
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 7ab2b21e7238..5dcf877e2872 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -365,6 +365,8 @@ struct bcma_bus {
/* Backplane registers, EROM included, are big-endian */
bool big_endian;
+ /* Cores have no DMP wrappers, the host ops handle agent accesses */
+ bool wrapperless;
};
static inline u32 bcma_read8(struct bcma_device *core, u16 offset)
--
2.56.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v3 4/5] bcma: add host driver for the BCM6362 integrated WLAN backplane
2026-11-03 23:30 [PATCH v3 0/5] bcma: support the BCM6362 integrated WLAN backplane Alessio Ferri
` (2 preceding siblings ...)
2026-11-03 23:30 ` [PATCH v3 3/5] bcma: scan: accept wrapper-less cores on wrapper-less backplanes Alessio Ferri
@ 2026-11-03 23:31 ` Alessio Ferri
2026-11-03 23:31 ` [PATCH v3 5/5] MIPS: dts: bcm6362: add the " Alessio Ferri
4 siblings, 0 replies; 6+ messages in thread
From: Alessio Ferri @ 2026-11-03 23:31 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Rafał Miłecki, Philipp Zabel, Florian Fainelli,
Broadcom internal kernel review list, Thomas Bogendoerfer,
Jonas Gorski
Cc: linux-wireless, devicetree, linux-kernel, linux-mips, Alessio Ferri
The BCM6362 integrates a WLAN macro on a dedicated bcma backplane.
CFE leaves the macro clock gated and in reset, the backplane is
a big-endian peripheral, and none of the cores has a wrapper:
gating and reset of ChipCommon and of the 802.11 core go through
per-core control registers in a separate WLAN control block.
Add a host driver for it that:
- maps the ChipCommon and WLAN control register blocks;
- enables the clock, cycles the WLAN and WLAN UBUS resets and runs the
macro enable sequence bcma touches the backplane;
- provides big-endian register and block I/O ops;
- emulates BCMA_IOCTL, BCMA_IOST, BCMA_RESET_CTL and BCMA_RESET_ST
on top of the per-core control registers. The PHY bits of
BCMA_IOST report what b43 needs to hear;
- sets the big_endian and wrapperless bus flags before scanning.
As for the PCI and generic SoC hosts, the driver is linked into
bcma.ko and registered from bcma_modinit().
Add a MAINTAINERS entry for the driver and its binding.
The 802.11 core (rev 0x16) is handled by b43 once a SPROM is
available; on this SoC it is not stored on the chip and has to be
provided. In openwrt i use 6362-sprom plus fixups.
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
---
MAINTAINERS | 7 +
drivers/bcma/Kconfig | 12 ++
drivers/bcma/Makefile | 1 +
drivers/bcma/bcma_private.h | 15 ++
drivers/bcma/host_soc_bcm6362.c | 419 ++++++++++++++++++++++++++++++++++++++++
drivers/bcma/main.c | 6 +
6 files changed, 460 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index f53047aa8d3c..00d964829db5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5235,6 +5235,13 @@ S: Maintained
F: arch/arm/boot/dts/broadcom/bcm47189*
F: arch/arm/boot/dts/broadcom/bcm53573*
+BROADCOM BCM6362 WLAN BCMA HOST DRIVER
+M: Alessio Ferri <alessio.ferri@mythread.it>
+L: linux-wireless@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/bus/brcm,bcm6362-wlan-bus-axi.yaml
+F: drivers/bcma/host_soc_bcm6362.c
+
BROADCOM BCM63XX/BCM33XX UDC DRIVER
M: Kevin Cernekee <cernekee@gmail.com>
L: linux-usb@vger.kernel.org
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index b9558ff20830..ef0c461bdf90 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -38,6 +38,18 @@ config BCMA_HOST_SOC
If unsure, say N
+config BCMA_HOST_SOC_BCM6362
+ bool "Support for the BCM6362 integrated WLAN backplane"
+ depends on BMIPS_GENERIC || COMPILE_TEST
+ depends on OF
+ help
+ Host driver for the bcma backplane of the WLAN macro
+ integrated in the Broadcom BCM6362 SoC. It powers the macro on
+ and lets bcma enumerate the backplane, so that the 802.11 core
+ can be driven by b43.
+
+ If unsure, say N
+
config BCMA_DRIVER_PCI
bool "BCMA Broadcom PCI core driver"
depends on PCI
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
index f8c37de35da2..3ff93990ecbb 100644
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -13,6 +13,7 @@ bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o
bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o
+bcma-$(CONFIG_BCMA_HOST_SOC_BCM6362) += host_soc_bcm6362.o
obj-$(CONFIG_BCMA) += bcma.o
ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index 6eded32d1aac..931a0ca0aea3 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -118,6 +118,21 @@ static inline void __exit bcma_host_soc_unregister_driver(void)
}
#endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */
+/* host_soc_bcm6362.c */
+#ifdef CONFIG_BCMA_HOST_SOC_BCM6362
+int __init bcma_host_soc_bcm6362_register_driver(void);
+void __exit bcma_host_soc_bcm6362_unregister_driver(void);
+#else
+static inline int __init bcma_host_soc_bcm6362_register_driver(void)
+{
+ return 0;
+}
+
+static inline void __exit bcma_host_soc_bcm6362_unregister_driver(void)
+{
+}
+#endif /* CONFIG_BCMA_HOST_SOC_BCM6362 */
+
/* driver_pci.c */
#ifdef CONFIG_BCMA_DRIVER_PCI
u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
diff --git a/drivers/bcma/host_soc_bcm6362.c b/drivers/bcma/host_soc_bcm6362.c
new file mode 100644
index 000000000000..5a4fa6a63411
--- /dev/null
+++ b/drivers/bcma/host_soc_bcm6362.c
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Broadcom BCM6362 integrated WLAN backplane host driver
+ *
+ * The backplane is a big-endian peripheral. Its cores have no DMP
+ * wrappers: the agent registers of ChipCommon and of the 802.11 core
+ * are emulated on top of the per-core control registers of the WLAN
+ * control block.
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <linux/bcma/bcma.h>
+
+#include "bcma_private.h"
+
+#define BCM6362_WLAN_MISC 0x00
+#define BCM6362_WLAN_MISC_FORCE_CLK_ON BIT(2)
+#define BCM6362_WLAN_MISC_MACRO_DISABLE BIT(1)
+#define BCM6362_WLAN_MISC_MACRO_SOFT_RESET BIT(0)
+#define BCM6362_WLAN_CC_CONTROL 0x08
+#define BCM6362_WLAN_MAC_CONTROL 0x10
+#define BCM6362_WLAN_CC_ID_A 0x18
+#define BCM6362_WLAN_MAC_ID_A 0x24
+
+/*
+ * Per-core control register layout: BCMA_IOCTL in the low 16 bits,
+ * BCMA_RESET_CTL_RESET in bit 16.
+ */
+#define BCM6362_WLAN_CTL_IOCTL GENMASK(15, 0)
+#define BCM6362_WLAN_CTL_RESET BIT(16)
+
+#define BCM6362_WLAN_IOST_2G_PHY BIT(0)
+#define BCM6362_WLAN_IOST_5G_PHY BIT(1)
+
+struct bcma_host_soc_bcm6362 {
+ struct bcma_bus bus;
+ void __iomem *wlan_ctrl;
+ struct clk *clk;
+ struct reset_control *rst_wlan;
+ struct reset_control *rst_wlan_ubus;
+};
+
+static struct bcma_host_soc_bcm6362 *to_bcm6362(struct bcma_bus *bus)
+{
+ return container_of(bus, struct bcma_host_soc_bcm6362, bus);
+}
+
+static u8 bcma_host_soc_bcm6362_read8(struct bcma_device *core, u16 offset)
+{
+ return readb(core->io_addr + offset);
+}
+
+static u16 bcma_host_soc_bcm6362_read16(struct bcma_device *core, u16 offset)
+{
+ return ioread16be(core->io_addr + offset);
+}
+
+static u32 bcma_host_soc_bcm6362_read32(struct bcma_device *core, u16 offset)
+{
+ return ioread32be(core->io_addr + offset);
+}
+
+static void bcma_host_soc_bcm6362_write8(struct bcma_device *core, u16 offset,
+ u8 value)
+{
+ writeb(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_bcm6362_write16(struct bcma_device *core, u16 offset,
+ u16 value)
+{
+ iowrite16be(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_bcm6362_write32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ iowrite32be(value, core->io_addr + offset);
+}
+
+#ifdef CONFIG_BCMA_BLOCKIO
+/* Buffers are kept in bus byte order, so copy them without swapping. */
+static void bcma_host_soc_bcm6362_block_read(struct bcma_device *core,
+ void *buffer, size_t count,
+ u16 offset, u8 reg_width)
+{
+ void __iomem *addr = core->io_addr + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ u8 *buf = buffer;
+
+ while (count) {
+ *buf = __raw_readb(addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ __be16 *buf = buffer;
+
+ WARN_ON(count & 1);
+ while (count) {
+ *buf = (__force __be16)__raw_readw(addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ __be32 *buf = buffer;
+
+ WARN_ON(count & 3);
+ while (count) {
+ *buf = (__force __be32)__raw_readl(addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ WARN_ON(1);
+ }
+}
+
+static void bcma_host_soc_bcm6362_block_write(struct bcma_device *core,
+ const void *buffer, size_t count,
+ u16 offset, u8 reg_width)
+{
+ void __iomem *addr = core->io_addr + offset;
+
+ switch (reg_width) {
+ case sizeof(u8): {
+ const u8 *buf = buffer;
+
+ while (count) {
+ __raw_writeb(*buf, addr);
+ buf++;
+ count--;
+ }
+ break;
+ }
+ case sizeof(u16): {
+ const __be16 *buf = buffer;
+
+ WARN_ON(count & 1);
+ while (count) {
+ __raw_writew((__force u16)*buf, addr);
+ buf++;
+ count -= 2;
+ }
+ break;
+ }
+ case sizeof(u32): {
+ const __be32 *buf = buffer;
+
+ WARN_ON(count & 3);
+ while (count) {
+ __raw_writel((__force u32)*buf, addr);
+ buf++;
+ count -= 4;
+ }
+ break;
+ }
+ default:
+ WARN_ON(1);
+ }
+}
+#endif /* CONFIG_BCMA_BLOCKIO */
+
+static void __iomem *bcma_host_soc_bcm6362_ctl_reg(struct bcma_device *core)
+{
+ struct bcma_host_soc_bcm6362 *host = to_bcm6362(core->bus);
+
+ switch (core->id.id) {
+ case BCMA_CORE_CHIPCOMMON:
+ return host->wlan_ctrl + BCM6362_WLAN_CC_CONTROL;
+ case BCMA_CORE_80211:
+ return host->wlan_ctrl + BCM6362_WLAN_MAC_CONTROL;
+ default:
+ return NULL;
+ }
+}
+
+static u32 bcma_host_soc_bcm6362_aread32(struct bcma_device *core, u16 offset)
+{
+ void __iomem *ctl = bcma_host_soc_bcm6362_ctl_reg(core);
+
+ switch (offset) {
+ case BCMA_IOCTL:
+ if (!ctl)
+ return BCMA_IOCTL_CLK;
+ return ioread32be(ctl) & BCM6362_WLAN_CTL_IOCTL;
+ case BCMA_IOST:
+ /*
+ * The core bits of MacStatus do not reflect the PHY while
+ * the 802.11 core is held in reset, so report what the
+ * macro supports: a dual-band PHY and 64-bit DMA. The bands
+ * actually usable depend on the board antennas.
+ */
+ if (core->id.id == BCMA_CORE_80211)
+ return BCM6362_WLAN_IOST_2G_PHY |
+ BCM6362_WLAN_IOST_5G_PHY | BCMA_IOST_DMA64;
+ return 0;
+ case BCMA_RESET_CTL:
+ if (ctl && (ioread32be(ctl) & BCM6362_WLAN_CTL_RESET))
+ return BCMA_RESET_CTL_RESET;
+ return 0;
+ case BCMA_RESET_ST:
+ return 0;
+ default:
+ dev_warn_once(core->bus->dev,
+ "core 0x%03x: unhandled agent read at 0x%03x\n",
+ core->id.id, offset);
+ return 0;
+ }
+}
+
+static void bcma_host_soc_bcm6362_awrite32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ void __iomem *ctl = bcma_host_soc_bcm6362_ctl_reg(core);
+ u32 val;
+
+ if (!ctl)
+ goto unhandled;
+
+ switch (offset) {
+ case BCMA_IOCTL:
+ val = ioread32be(ctl) & BCM6362_WLAN_CTL_RESET;
+ val |= value & BCM6362_WLAN_CTL_IOCTL;
+ iowrite32be(val, ctl);
+ return;
+ case BCMA_RESET_CTL:
+ val = ioread32be(ctl);
+ if (value & BCMA_RESET_CTL_RESET)
+ val |= BCM6362_WLAN_CTL_RESET;
+ else
+ val &= ~BCM6362_WLAN_CTL_RESET;
+ iowrite32be(val, ctl);
+ return;
+ }
+
+unhandled:
+ dev_warn_once(core->bus->dev,
+ "core 0x%03x: unhandled agent write 0x%08x at 0x%03x\n",
+ core->id.id, value, offset);
+}
+
+static const struct bcma_host_ops bcma_host_soc_bcm6362_ops = {
+ .read8 = bcma_host_soc_bcm6362_read8,
+ .read16 = bcma_host_soc_bcm6362_read16,
+ .read32 = bcma_host_soc_bcm6362_read32,
+ .write8 = bcma_host_soc_bcm6362_write8,
+ .write16 = bcma_host_soc_bcm6362_write16,
+ .write32 = bcma_host_soc_bcm6362_write32,
+#ifdef CONFIG_BCMA_BLOCKIO
+ .block_read = bcma_host_soc_bcm6362_block_read,
+ .block_write = bcma_host_soc_bcm6362_block_write,
+#endif
+ .aread32 = bcma_host_soc_bcm6362_aread32,
+ .awrite32 = bcma_host_soc_bcm6362_awrite32,
+};
+
+/*
+ * Macro enable sequence from the Broadcom board support code: with the
+ * clock forced on and the macro in soft reset, enable the 802.11 core
+ * clock with force gated clock set, then release the soft reset and the
+ * forces.
+ */
+static int bcma_host_soc_bcm6362_power_on(struct bcma_host_soc_bcm6362 *host)
+{
+ void __iomem *base = host->wlan_ctrl;
+ int err;
+
+ err = clk_prepare_enable(host->clk);
+ if (err)
+ return err;
+ fsleep(10000);
+
+ reset_control_assert(host->rst_wlan_ubus);
+ reset_control_assert(host->rst_wlan);
+ fsleep(1000);
+ reset_control_deassert(host->rst_wlan_ubus);
+ reset_control_deassert(host->rst_wlan);
+ fsleep(1000);
+
+ iowrite32be(BCM6362_WLAN_MISC_FORCE_CLK_ON |
+ BCM6362_WLAN_MISC_MACRO_SOFT_RESET,
+ base + BCM6362_WLAN_MISC);
+ fsleep(1000);
+
+ iowrite32be(BCMA_IOCTL_FGC | BCMA_IOCTL_CLK,
+ base + BCM6362_WLAN_MAC_CONTROL);
+ iowrite32be(BCM6362_WLAN_MISC_FORCE_CLK_ON, base + BCM6362_WLAN_MISC);
+ iowrite32be(0, base + BCM6362_WLAN_MISC);
+ iowrite32be(BCMA_IOCTL_CLK, base + BCM6362_WLAN_MAC_CONTROL);
+
+ dev_dbg(host->bus.dev, "CC ID A 0x%08x, MAC ID A 0x%08x\n",
+ ioread32be(base + BCM6362_WLAN_CC_ID_A),
+ ioread32be(base + BCM6362_WLAN_MAC_ID_A));
+
+ return 0;
+}
+
+static void bcma_host_soc_bcm6362_power_off(struct bcma_host_soc_bcm6362 *host)
+{
+ void __iomem *base = host->wlan_ctrl;
+
+ iowrite32be(0, base + BCM6362_WLAN_MAC_CONTROL);
+ iowrite32be(BCM6362_WLAN_MISC_MACRO_DISABLE |
+ BCM6362_WLAN_MISC_MACRO_SOFT_RESET,
+ base + BCM6362_WLAN_MISC);
+ reset_control_assert(host->rst_wlan);
+ reset_control_assert(host->rst_wlan_ubus);
+ clk_disable_unprepare(host->clk);
+}
+
+static int bcma_host_soc_bcm6362_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bcma_host_soc_bcm6362 *host;
+ struct bcma_bus *bus;
+ int err;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ bus = &host->bus;
+ bus->dev = dev;
+
+ bus->mmio = devm_platform_ioremap_resource_byname(pdev, "chipcommon");
+ if (IS_ERR(bus->mmio))
+ return PTR_ERR(bus->mmio);
+
+ host->wlan_ctrl = devm_platform_ioremap_resource_byname(pdev, "wlan-ctrl");
+ if (IS_ERR(host->wlan_ctrl))
+ return PTR_ERR(host->wlan_ctrl);
+
+ host->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(host->clk))
+ return dev_err_probe(dev, PTR_ERR(host->clk),
+ "failed to get clock\n");
+
+ host->rst_wlan = devm_reset_control_get_exclusive(dev, "wlan");
+ if (IS_ERR(host->rst_wlan))
+ return dev_err_probe(dev, PTR_ERR(host->rst_wlan),
+ "failed to get wlan reset\n");
+
+ host->rst_wlan_ubus = devm_reset_control_get_exclusive(dev, "wlan-ubus");
+ if (IS_ERR(host->rst_wlan_ubus))
+ return dev_err_probe(dev, PTR_ERR(host->rst_wlan_ubus),
+ "failed to get wlan-ubus reset\n");
+
+ err = bcma_host_soc_bcm6362_power_on(host);
+ if (err)
+ return dev_err_probe(dev, err, "failed to enable clock\n");
+
+ bus->hosttype = BCMA_HOSTTYPE_SOC;
+ bus->ops = &bcma_host_soc_bcm6362_ops;
+ bus->big_endian = true;
+ bus->wrapperless = true;
+
+ bcma_init_bus(bus);
+
+ err = bcma_bus_register(bus);
+ if (err) {
+ bcma_host_soc_bcm6362_power_off(host);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+}
+
+static void bcma_host_soc_bcm6362_remove(struct platform_device *pdev)
+{
+ struct bcma_host_soc_bcm6362 *host = platform_get_drvdata(pdev);
+
+ bcma_bus_unregister(&host->bus);
+ bcma_host_soc_bcm6362_power_off(host);
+}
+
+static const struct of_device_id bcma_host_soc_bcm6362_of_match[] = {
+ { .compatible = "brcm,bcm6362-wlan-bus-axi" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bcma_host_soc_bcm6362_of_match);
+
+static struct platform_driver bcma_host_soc_bcm6362_driver = {
+ .driver = {
+ .name = "bcma-host-soc-bcm6362",
+ .of_match_table = bcma_host_soc_bcm6362_of_match,
+ },
+ .probe = bcma_host_soc_bcm6362_probe,
+ .remove = bcma_host_soc_bcm6362_remove,
+};
+
+int __init bcma_host_soc_bcm6362_register_driver(void)
+{
+ return platform_driver_register(&bcma_host_soc_bcm6362_driver);
+}
+
+void __exit bcma_host_soc_bcm6362_unregister_driver(void)
+{
+ platform_driver_unregister(&bcma_host_soc_bcm6362_driver);
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 72f045e6ed51..4ccc9fb98f61 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -682,6 +682,11 @@ static int __init bcma_modinit(void)
pr_err("SoC host initialization failed\n");
err = 0;
}
+ err = bcma_host_soc_bcm6362_register_driver();
+ if (err) {
+ pr_err("BCM6362 WLAN host initialization failed\n");
+ err = 0;
+ }
#ifdef CONFIG_BCMA_HOST_PCI
err = bcma_host_pci_init();
if (err) {
@@ -699,6 +704,7 @@ static void __exit bcma_modexit(void)
#ifdef CONFIG_BCMA_HOST_PCI
bcma_host_pci_exit();
#endif
+ bcma_host_soc_bcm6362_unregister_driver();
bcma_host_soc_unregister_driver();
bus_unregister(&bcma_bus_type);
}
--
2.56.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v3 5/5] MIPS: dts: bcm6362: add the integrated WLAN backplane
2026-11-03 23:30 [PATCH v3 0/5] bcma: support the BCM6362 integrated WLAN backplane Alessio Ferri
` (3 preceding siblings ...)
2026-11-03 23:31 ` [PATCH v3 4/5] bcma: add host driver for the BCM6362 integrated WLAN backplane Alessio Ferri
@ 2026-11-03 23:31 ` Alessio Ferri
4 siblings, 0 replies; 6+ messages in thread
From: Alessio Ferri @ 2026-11-03 23:31 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Rafał Miłecki, Philipp Zabel, Florian Fainelli,
Broadcom internal kernel review list, Thomas Bogendoerfer,
Jonas Gorski
Cc: linux-wireless, devicetree, linux-kernel, linux-mips, Alessio Ferri
Describe the bcma backplane of the integrated WLAN macro,
with its clock, resets, power domain and the interrupt of the 802.11
core. It is default disabled, boards having the WLAN need to
enable it.
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
---
arch/mips/boot/dts/brcm/bcm6362.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
index d74021925c53..c6de39588840 100644
--- a/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -261,5 +261,25 @@ usbh: usb-phy@10002700 {
status = "disabled";
};
+
+ wlan: bus@10004000 {
+ compatible = "brcm,bcm6362-wlan-bus-axi";
+ reg = <0x10004000 0x1000>,
+ <0x10007000 0x100>;
+ reg-names = "chipcommon", "wlan-ctrl";
+
+ #address-cells = <1>;
+ clocks = <&periph_clk BCM6362_CLK_WLAN_OCP>;
+ #interrupt-cells = <1>;
+ interrupt-map = <0x00005000 0 &periph_intc 7>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ power-domains =
+ <&periph_pwr BCM6362_POWER_DOMAIN_WLAN_PADS>;
+ resets = <&periph_rst BCM6362_RST_WLAN_SHIM>,
+ <&periph_rst BCM6362_RST_WLAN_UBUS>;
+ reset-names = "wlan", "wlan-ubus";
+
+ status = "disabled";
+ };
};
};
--
2.56.0
^ permalink raw reply [flat|nested] 6+ messages in thread