[PATCH v3 0/2] clk: en7523: full clk_hw + set_rate for en7581

[PATCH v3 0/2] clk: en7523: full clk_hw + set_rate for en7581

[Christian Marangi]

This simple patch convert the en7523 clk for EN7581
to full clk and adds the .set_rate OPs.

Needed mostly to configure MDC clk rate.

This will be also implemented by AN7583 since they share the
same exact implementation.

Changes v3:
- Rework to clock divisor API
- Return error instead of -EINVAL
- Use dev_err where possible
- Use devm_kzalloc_obj
- Revert to not fail on clk registration failure

Changes v2:
- Fix recalc_rate return value on error

Christian Marangi (2):
  clk: en7523: convert to full clk_hw implementation for en7581
  clk: en7523: add support for .set_rate for en7581

 drivers/clk/clk-en7523.c | 280 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 260 insertions(+), 20 deletions(-)

-- 
2.55.0

[PATCH v3 1/2] clk: en7523: convert to full clk_hw implementation for en7581

[Christian Marangi]

In preparation for support of .set_rate, convert the clock register
logic from fixed clock implementation to full clk_hw implementation with
dedicated OPs for Airoha EN7581 SoC.

This is just a rework and no behaviour change is expected.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/clk-en7523.c | 75 +++++++++++++++++++++++++++++-----------
 1 file changed, 55 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 24fdec2e6198..6640e814d36a 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -126,6 +126,12 @@ struct en_clk_gate {
 	struct clk_hw hw;
 };
 
+struct en_clk {
+	struct regmap *map;
+	const struct en_clk_desc *desc;
+	struct clk_hw hw;
+};
+
 struct en_rst_data {
 	const u16 *bank_ofs;
 	const u16 *idx_map;
@@ -742,42 +748,71 @@ static int en7523_clk_hw_init(struct platform_device *pdev,
 				     en7581_rst_ofs);
 }
 
+static unsigned long en7581_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct en_clk *c = container_of(hw, struct en_clk, hw);
+	const struct en_clk_desc *desc = c->desc;
+	struct device *dev = clk_hw_get_dev(hw);
+	struct regmap *map = c->map;
+	u32 val, reg;
+	u32 rate;
+	int err;
+
+	err = regmap_read(map, desc->base_reg, &val);
+	if (err) {
+		dev_err(dev, "Failed reading fixed clk rate %s: %d\n",
+			desc->name, err);
+		return 0;
+	}
+	rate = en7523_get_base_rate(desc, val);
+
+	reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+	err = regmap_read(map, reg, &val);
+	if (err) {
+		dev_err(dev, "Failed reading fixed clk div %s: %d\n",
+			desc->name, err);
+		return 0;
+	}
+
+	return rate / en7523_get_div(desc, val);
+}
+
+static const struct clk_ops en7581_clk_ops = {
+	.recalc_rate = en7581_recalc_rate,
+};
+
 static void en7581_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
 				   struct regmap *map, void __iomem *base)
 {
 	struct clk_hw *hw;
-	u32 rate;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(en7581_base_clks); i++) {
 		const struct en_clk_desc *desc = &en7581_base_clks[i];
-		u32 val, reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+		struct clk_init_data init = {
+			.ops = &en7581_clk_ops,
+		};
+		struct en_clk *en_clk;
 		int err;
 
-		err = regmap_read(map, desc->base_reg, &val);
-		if (err) {
-			pr_err("Failed reading fixed clk rate %s: %d\n",
-			       desc->name, err);
+		en_clk = devm_kzalloc_obj(dev, *en_clk);
+		if (!en_clk)
 			continue;
-		}
-		rate = en7523_get_base_rate(desc, val);
 
-		err = regmap_read(map, reg, &val);
-		if (err) {
-			pr_err("Failed reading fixed clk div %s: %d\n",
-			       desc->name, err);
-			continue;
-		}
-		rate /= en7523_get_div(desc, val);
+		init.name = desc->name;
+		en_clk->map = map;
+		en_clk->desc = desc;
+		en_clk->hw.init = &init;
 
-		hw = clk_hw_register_fixed_rate(dev, desc->name, NULL, 0, rate);
-		if (IS_ERR(hw)) {
-			pr_err("Failed to register clk %s: %ld\n",
-			       desc->name, PTR_ERR(hw));
+		err = devm_clk_hw_register(dev, &en_clk->hw);
+		if (err) {
+			dev_err_probe(dev, err, "Failed to register clk %s\n",
+				      desc->name);
 			continue;
 		}
 
-		clk_data->hws[desc->id] = hw;
+		clk_data->hws[desc->id] = &en_clk->hw;
 	}
 
 	hw = en7523_register_pcie_clk(dev, base);
-- 
2.55.0

[PATCH v3 2/2] clk: en7523: add support for .set_rate for en7581

[Christian Marangi]

Add support for EN7523 driver to configure rate for Airoha EN7581 SoC.
The SoC expose both base clock selector and clock divisor hence it's
possible to change the rate.

This will be especially needed for new SoC AN7583 that require changes
for the MDIO and the eMMC.

The clock were assumed correctly configured by the bootloader but this
goes against the rule of "kernel should not depend on external
configuration".

To support the use of standard clock divider API, clock_div_table are added
where needed (BUS, SPI and SLIC) in additionl to the previous info to
derive and simulate the clock from the divisor registers.

Recalc rate for Airoha EN7581 is updated to use the divider_recalc_rate API
for consistency with .set_rate and .determine_rate.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/clk/clk-en7523.c | 207 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 206 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 6640e814d36a..cf0b6ccacede 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -119,6 +119,8 @@ struct en_clk_desc {
 	u16 div_val0;
 	u8 div_step;
 	u8 div_offset;
+	unsigned long div_flags;
+	const struct clk_div_table *div_table;
 };
 
 struct en_clk_gate {
@@ -161,7 +163,88 @@ struct en_clk_soc_data {
 static const u32 gsw_base[] = { 400000000, 500000000 };
 static const u32 emi_base[] = { 333000000, 400000000 };
 static const u32 bus_base[] = { 500000000, 540000000 };
+/* From documentation divisor 1 is n/a */
+static const struct clk_div_table bus_div[] = {
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 3, .div = 4 },
+	{ .val = 4, .div = 5 },
+	{ .val = 5, .div = 6 },
+	{ .val = 6, .div = 7 },
+	{ .val = 7, .div = 8 },
+	{ /* sentinel */ }
+};
 static const u32 slic_base[] = { 100000000, 3125000 };
+static const struct clk_div_table slic_div[] = {
+	{ .val = 0, .div = 20 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ .val = 8, .div = 16 },
+	{ .val = 9, .div = 18 },
+	{ .val = 10, .div = 20 },
+	{ .val = 11, .div = 22 },
+	{ .val = 12, .div = 24 },
+	{ .val = 13, .div = 26 },
+	{ .val = 14, .div = 28 },
+	{ .val = 15, .div = 30 },
+	{ .val = 16, .div = 32 },
+	{ .val = 17, .div = 34 },
+	{ .val = 18, .div = 36 },
+	{ .val = 19, .div = 38 },
+	{ .val = 20, .div = 40 },
+	{ .val = 21, .div = 42 },
+	{ .val = 22, .div = 44 },
+	{ .val = 23, .div = 46 },
+	{ .val = 24, .div = 48 },
+	{ .val = 25, .div = 50 },
+	{ .val = 26, .div = 52 },
+	{ .val = 27, .div = 54 },
+	{ .val = 28, .div = 56 },
+	{ .val = 29, .div = 58 },
+	{ .val = 30, .div = 60 },
+	{ .val = 31, .div = 62 },
+	{ /* sentinel */ }
+};
+static const struct clk_div_table spi_div[] = {
+	{ .val = 0, .div = 40 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ .val = 4, .div = 8 },
+	{ .val = 5, .div = 10 },
+	{ .val = 6, .div = 12 },
+	{ .val = 7, .div = 14 },
+	{ .val = 8, .div = 16 },
+	{ .val = 9, .div = 18 },
+	{ .val = 10, .div = 20 },
+	{ .val = 11, .div = 22 },
+	{ .val = 12, .div = 24 },
+	{ .val = 13, .div = 26 },
+	{ .val = 14, .div = 28 },
+	{ .val = 15, .div = 30 },
+	{ .val = 16, .div = 32 },
+	{ .val = 17, .div = 34 },
+	{ .val = 18, .div = 36 },
+	{ .val = 19, .div = 38 },
+	{ .val = 20, .div = 40 },
+	{ .val = 21, .div = 42 },
+	{ .val = 22, .div = 44 },
+	{ .val = 23, .div = 46 },
+	{ .val = 24, .div = 48 },
+	{ .val = 25, .div = 50 },
+	{ .val = 26, .div = 52 },
+	{ .val = 27, .div = 54 },
+	{ .val = 28, .div = 56 },
+	{ .val = 29, .div = 58 },
+	{ .val = 30, .div = 60 },
+	{ .val = 31, .div = 62 },
+	{ /* sentinel */ }
+};
 static const u32 npu_base[] = { 333000000, 400000000, 500000000 };
 /* EN7581 */
 static const u32 emi7581_base[] = { 540000000, 480000000, 400000000, 300000000 };
@@ -215,6 +298,7 @@ static const struct en_clk_desc en7523_base_clks[] = {
 		.div_shift = 0,
 		.div_step = 1,
 		.div_offset = 1,
+		.div_table = bus_div,
 	}, {
 		.id = EN7523_CLK_SLIC,
 		.name = "slic",
@@ -230,6 +314,7 @@ static const struct en_clk_desc en7523_base_clks[] = {
 		.div_shift = 24,
 		.div_val0 = 20,
 		.div_step = 2,
+		.div_table = slic_div,
 	}, {
 		.id = EN7523_CLK_SPI,
 		.name = "spi",
@@ -242,6 +327,7 @@ static const struct en_clk_desc en7523_base_clks[] = {
 		.div_shift = 8,
 		.div_val0 = 40,
 		.div_step = 2,
+		.div_table = spi_div,
 	}, {
 		.id = EN7523_CLK_NPU,
 		.name = "npu",
@@ -311,6 +397,7 @@ static const struct en_clk_desc en7581_base_clks[] = {
 		.div_shift = 0,
 		.div_step = 1,
 		.div_offset = 1,
+		.div_table = bus_div,
 	}, {
 		.id = EN7523_CLK_SLIC,
 		.name = "slic",
@@ -326,6 +413,7 @@ static const struct en_clk_desc en7581_base_clks[] = {
 		.div_shift = 24,
 		.div_val0 = 20,
 		.div_step = 2,
+		.div_table = slic_div,
 	}, {
 		.id = EN7523_CLK_SPI,
 		.name = "spi",
@@ -338,6 +426,7 @@ static const struct en_clk_desc en7581_base_clks[] = {
 		.div_shift = 8,
 		.div_val0 = 40,
 		.div_step = 2,
+		.div_table = spi_div,
 	}, {
 		.id = EN7523_CLK_NPU,
 		.name = "npu",
@@ -775,11 +864,127 @@ static unsigned long en7581_recalc_rate(struct clk_hw *hw,
 		return 0;
 	}
 
-	return rate / en7523_get_div(desc, val);
+	if (desc->div_bits) {
+		val >>= desc->div_shift;
+		val &= (1 << desc->div_bits) - 1;
+
+		rate = divider_recalc_rate(hw, rate, val,
+					   desc->div_table,
+					   desc->div_flags,
+					   desc->div_bits);
+	}
+
+	return rate;
+}
+
+static int en7581_get_vals_for_rate(struct clk_hw *hw,
+				    const struct en_clk_desc *desc,
+				    unsigned long rate,
+				    u32 *base_val, u32 *div_val)
+{
+	struct device *dev = clk_hw_get_dev(hw);
+	int tmp_base_val = 0;
+	int tmp_div_val = 0;
+
+	if (!desc->base_bits && !desc->div_bits)
+		return -EINVAL;
+
+	/* Search requested rate with every matching base rate + divisor */
+	for (; tmp_base_val < desc->n_base_values; tmp_base_val++) {
+		unsigned long parent_rate = desc->base_values[tmp_base_val];
+		unsigned long tmp_rate = parent_rate;
+
+		/*
+		 * Simulate rate with every divisor supported
+		 * 1. Search the divisor for the requested rate
+		 * 2. Simulate the final rate with the new divisor
+		 */
+		if (desc->div_bits) {
+			tmp_div_val = divider_get_val(rate, parent_rate,
+						      desc->div_table,
+						      desc->div_bits,
+						      desc->div_flags);
+			tmp_rate = divider_recalc_rate(hw, parent_rate,
+						       tmp_div_val,
+						       desc->div_table,
+						       desc->div_flags,
+						       desc->div_bits);
+		}
+
+		/* Matching clock found */
+		if (tmp_rate == rate)
+			break;
+	}
+
+	/* Failed to found matching clock, return error */
+	if (tmp_base_val >= desc->n_base_values) {
+		dev_err(dev, "Invalid rate for clock %s\n",
+			desc->name);
+		return -EINVAL;
+	}
+
+	*base_val = tmp_base_val;
+	*div_val = tmp_div_val;
+
+	return 0;
+}
+
+static int en7581_determine_rate(struct clk_hw *hw,
+				 struct clk_rate_request *req)
+{
+	struct en_clk *en_clk = container_of(hw, struct en_clk, hw);
+	u32 div_val, base_val;
+
+	/* Just check if the rate is possible */
+	return en7581_get_vals_for_rate(hw, en_clk->desc, req->rate,
+					&base_val, &div_val);
+}
+
+static int en7581_set_rate(struct clk_hw *hw, unsigned long rate,
+			   unsigned long parent_rate)
+{
+	struct en_clk *en_clk = container_of(hw, struct en_clk, hw);
+	const struct en_clk_desc *desc = en_clk->desc;
+	struct device *dev = clk_hw_get_dev(hw);
+	struct regmap *map = en_clk->map;
+	u32 base_val, div_val;
+	u32 reg, val, mask;
+	int err;
+
+	err = en7581_get_vals_for_rate(hw, en_clk->desc, rate,
+				       &base_val, &div_val);
+	if (err)
+		return err;
+
+	if (desc->div_bits) {
+		reg = desc->div_reg ? desc->div_reg : desc->base_reg;
+
+		mask = (BIT(desc->div_bits) - 1) << desc->div_shift;
+		val = div_val << desc->div_shift;
+
+		err = regmap_update_bits(map, reg, mask, val);
+		if (err)
+			return dev_err_probe(dev, err, "Failed to update div reg for clock %s\n",
+					     desc->name);
+	}
+
+	if (desc->base_bits) {
+		mask = (BIT(desc->base_bits) - 1) << desc->base_shift;
+		val = base_val << desc->base_shift;
+
+		err = regmap_update_bits(map, desc->base_reg, mask, val);
+		if (err)
+			return dev_err_probe(dev, err, "Failed to update reg for clock %s\n",
+					     desc->name);
+	}
+
+	return 0;
 }
 
 static const struct clk_ops en7581_clk_ops = {
 	.recalc_rate = en7581_recalc_rate,
+	.determine_rate = en7581_determine_rate,
+	.set_rate = en7581_set_rate,
 };
 
 static void en7581_register_clocks(struct device *dev, struct clk_hw_onecell_data *clk_data,
-- 
2.55.0