[PATCH 0/3] ARM: dts: aspeed: ventura2: Add LTC2305 ADCs and GPIO line names

[PATCH 0/3] ARM: dts: aspeed: ventura2: Add LTC2305 ADCs and GPIO line names

[Kyle Hsieh]

This series is a follow-up to the Ventura2 devicetree.

Patch 1 describes the three LTC2305 ADCs fitted on Ventura2 and exposes
the valve voltages read by the bus 3 ADCs through iio-hwmon.

The LTC2305 ADCs use their internal 4.096V reference, so no vref-supply
is described. Patch 1 therefore depends on "dt-bindings: iio: adc:
ltc2497: Make vref-supply optional for LTC2305/LTC2309"; without it,
dtbs_check reports a missing vref-supply for the LTC2305 nodes.

Patch 2 names the presence detect GPIO of the optional COM Express
module so userspace can determine whether the module is present.

Patch 3 names the reset GPIOs of the three USB-to-UART bridges so
userspace can reset the bridges.

Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
---
Kyle Hsieh (3):
      ARM: dts: aspeed: ventura2: Add LTC2305 ADCs
      ARM: dts: aspeed: ventura2: Name the COMe presence GPIO
      ARM: dts: aspeed: ventura2: Name the USB-UART bridge reset GPIOs

 .../dts/aspeed/aspeed-bmc-facebook-ventura2.dts    | 36 ++++++++++++++++++++--
 1 file changed, 33 insertions(+), 3 deletions(-)
---
base-commit: f4dcbba2ec358f7079daddcda7594dad9746326a
change-id: 20261106-ventura2-dts-update-f00bc0510b2b

Best regards,
-- 
Kyle Hsieh <kylehsieh1995@gmail.com>

[PATCH 1/3] ARM: dts: aspeed: ventura2: Add LTC2305 ADCs

[Kyle Hsieh]

Ventura2 has three LTC2305 2-channel 12-bit ADCs: one behind channel 2
of the PCA9548 mux on I2C bus 0, and two on I2C bus 3 at addresses
0x08 and 0x09. The bus 3 ADCs read the valve voltages.

Describe the ADCs and expose the bus 3 channels through iio-hwmon so
the voltages are reported as hwmon sensors.

The ADCs use their internal 4.096V reference, so no vref-supply is
described.

Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-ventura2.dts     | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
index f3dbdece3076..50e652cc37a1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
@@ -190,7 +190,8 @@ iio-hwmon {
 		io-channels =
 			<&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
 			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-			<&adc1 2>;
+			<&adc1 2>,
+			<&adc_op_fb1 0>, <&adc_op_fb1 1>, <&adc_op_fb2 0>;
 	};
 
 	leds {
@@ -392,6 +393,12 @@ i2c0mux0ch2: i2c@2 {
 			reg = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			adc@8 {
+				compatible = "lltc,ltc2305";
+				reg = <0x08>;
+				#io-channel-cells = <1>;
+			};
 		};
 
 		i2c0mux0ch3: i2c@3 {
@@ -583,6 +590,18 @@ &i2c3 {
 
 	status = "okay";
 
+	adc_op_fb1: adc@8 {
+		compatible = "lltc,ltc2305";
+		reg = <0x08>;
+		#io-channel-cells = <1>;
+	};
+
+	adc_op_fb2: adc@9 {
+		compatible = "lltc,ltc2305";
+		reg = <0x09>;
+		#io-channel-cells = <1>;
+	};
+
 	dac@c {
 		compatible = "adi,ad5612";
 		reg = <0x0c>;

-- 
2.34.1

[PATCH 2/3] ARM: dts: aspeed: ventura2: Name the COMe presence GPIO

[Kyle Hsieh]

Line 9 of the PCA9555 at address 0x23 on I2C bus 3 is the presence
detect of the optional COM Express module. Name it PRSNT_COME_N so
userspace can determine whether the module is present.

Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
index 50e652cc37a1..a9c5990ef969 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
@@ -625,6 +625,17 @@ gpio@23 {
 		reg = <0x23>;
 		#gpio-cells = <2>;
 		gpio-controller;
+
+		gpio-line-names =
+			"", "",
+			"", "",
+			"", "",
+			"", "",
+			"", "PRSNT_COME_N",
+			"", "",
+			"", "",
+			"", "";
+
 		interrupt-parent = <&io_expander7>;
 		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 	};

-- 
2.34.1

[PATCH 3/3] ARM: dts: aspeed: ventura2: Name the USB-UART bridge reset GPIOs

[Kyle Hsieh]

Lines 2-4 of the PCA9555 at address 0x20 on I2C bus 6 drive the reset
of the three USB-to-UART bridges. Name them RST_FT4232_{1,2,3}_BMC_N_R
after the schematic nets so userspace can reset the bridges.

Signed-off-by: Kyle Hsieh <kylehsieh1995@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
index a9c5990ef969..af26256f19f4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
@@ -1937,8 +1937,8 @@ gpio@20 {
 
 		gpio-line-names =
 			"", "",
-			"", "",
-			"", "PRSNT_FANBP_0_PWR_N",
+			"RST_FT4232_1_BMC_N_R", "RST_FT4232_2_BMC_N_R",
+			"RST_FT4232_3_BMC_N_R", "PRSNT_FANBP_0_PWR_N",
 			"PRSNT_FANBP_0_SIG_N", "PRSNT_POE_PWR_N",
 			"PRSNT_POE_SIG_N", "",
 			"PWRGD_P3V3_ISO_POE_BMC_R", "",

-- 
2.34.1