From: David Matlack <dmatlack@google.com>
To: kexec@lists.infradead.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Cc: Alexander Graf <graf@amazon.com>,
Alex Williamson <alex@shazbot.org>,
Bjorn Helgaas <bhelgaas@google.com>,
David Matlack <dmatlack@google.com>,
Jason Gunthorpe <jgg@nvidia.com>,
Jonathan Corbet <corbet@lwn.net>, Josh Hilke <jrhilke@google.com>,
Lukas Wunner <lukas@wunner.de>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
Mike Rapoport <rppt@kernel.org>,
"Oliver O'Halloran" <oohall@gmail.com>,
Pasha Tatashin <pasha.tatashin@soleen.com>,
Pratyush Yadav <pratyush@kernel.org>,
Randy Dunlap <rdunlap@infradead.org>,
Samiullah Khawaja <skhawaja@google.com>,
Shuah Khan <skhan@linuxfoundation.org>,
Vipin Sharma <vipinsh@google.com>
Subject: [PATCH v2 08/17] PCI/AER: Save AER state in the saved capability store
Date: Fri, 6 Nov 2026 00:42:09 +0000 [thread overview]
Message-ID: <20261106004218.604799-9-dmatlack@google.com> (raw)
In-Reply-To: <20261106004218.604799-1-dmatlack@google.com>
Save and restore the AER mask, severity, capability and root command
registers through the per-device saved capability store instead of a
private pci_cap_saved_state buffer.
Describe the registers in aer_saved_regs[] and drive the reservation, save,
and restore loops from it. Previously the three had to be kept in the same
order by hand, and pci_aer_init() encoded the register count as a bare 4 or
5.
Reserve the registers in pci_reserve_aer_state(), called from
pci_aer_init(), and report a refused reservation. pci_aer_init() ignored
the return value of pci_add_ext_cap_save_buffer(), so a failed
allocation left AER state unsaved without any message. An allocation
failure is now reported once by pci_saved_caps_finalize().
No other functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
---
drivers/pci/pcie/aer.c | 85 +++++++++++++++++++++++-------------------
1 file changed, 46 insertions(+), 39 deletions(-)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index d8dcd238fda1..25436bcf9fb9 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -352,54 +352,68 @@ int pci_aer_clear_status(struct pci_dev *dev)
return pci_aer_raw_clear_status(dev);
}
-void pci_save_aer_state(struct pci_dev *dev)
+/*
+ * AER registers saved and restored by the PCI core. PCI_ERR_ROOT_COMMAND is
+ * only implemented by Root Ports and Root Complex Event Collectors (PCIe
+ * r6.0, sec 7.8.4.9) and so must come last.
+ */
+static const u16 aer_saved_regs[] = {
+ PCI_ERR_UNCOR_MASK,
+ PCI_ERR_UNCOR_SEVER,
+ PCI_ERR_COR_MASK,
+ PCI_ERR_CAP,
+ PCI_ERR_ROOT_COMMAND,
+};
+
+static unsigned int aer_nr_saved_regs(struct pci_dev *dev)
{
- int aer = dev->aer_cap;
- struct pci_cap_saved_state *save_state;
- u32 *cap;
+ if (pcie_cap_has_rtctl(dev))
+ return ARRAY_SIZE(aer_saved_regs);
- if (!aer)
- return;
+ return ARRAY_SIZE(aer_saved_regs) - 1;
+}
- save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_ERR);
- if (!save_state)
+void pci_save_aer_state(struct pci_dev *dev)
+{
+ unsigned int i;
+
+ if (!dev->aer_cap)
return;
- cap = &save_state->cap.data[0];
- pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, cap++);
- pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, cap++);
- pci_read_config_dword(dev, aer + PCI_ERR_COR_MASK, cap++);
- pci_read_config_dword(dev, aer + PCI_ERR_CAP, cap++);
- if (pcie_cap_has_rtctl(dev))
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, cap++);
+ for (i = 0; i < aer_nr_saved_regs(dev); i++)
+ pci_save_cap_dword(dev, dev->aer_cap + aer_saved_regs[i]);
}
void pci_restore_aer_state(struct pci_dev *dev)
{
- int aer = dev->aer_cap;
- struct pci_cap_saved_state *save_state;
- u32 *cap;
+ unsigned int i;
- if (!aer)
+ if (!dev->aer_cap)
return;
- save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_ERR);
- if (!save_state)
- return;
+ for (i = 0; i < aer_nr_saved_regs(dev); i++)
+ pci_restore_cap_dword(dev, dev->aer_cap + aer_saved_regs[i]);
+}
- cap = &save_state->cap.data[0];
- pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, *cap++);
- pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, *cap++);
- pci_write_config_dword(dev, aer + PCI_ERR_COR_MASK, *cap++);
- pci_write_config_dword(dev, aer + PCI_ERR_CAP, *cap++);
- if (pcie_cap_has_rtctl(dev))
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, *cap++);
+static void pci_reserve_aer_state(struct pci_dev *dev)
+{
+ unsigned int i;
+ int rc;
+
+ for (i = 0; i < aer_nr_saved_regs(dev); i++) {
+ unsigned int off = dev->aer_cap + aer_saved_regs[i];
+
+ rc = pci_reserve_saved_cap(dev, off, sizeof(u32));
+ if (rc) {
+ pci_err(dev, "unable to reserve AER save state (%pe)\n",
+ ERR_PTR(rc));
+ return;
+ }
+ }
}
void pci_aer_init(struct pci_dev *dev)
{
- int n;
-
dev->aer_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (!dev->aer_cap)
return;
@@ -415,14 +429,7 @@ void pci_aer_init(struct pci_dev *dev)
ratelimit_state_init(&dev->aer_info->nonfatal_ratelimit,
DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);
- /*
- * We save/restore PCI_ERR_UNCOR_MASK, PCI_ERR_UNCOR_SEVER,
- * PCI_ERR_COR_MASK, and PCI_ERR_CAP. Root and Root Complex Event
- * Collectors also implement PCI_ERR_ROOT_COMMAND (PCIe r6.0, sec
- * 7.8.4.9).
- */
- n = pcie_cap_has_rtctl(dev) ? 5 : 4;
- pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_ERR, sizeof(u32) * n);
+ pci_reserve_aer_state(dev);
/*
* Advisory Non-Fatal Errors are masked by default (PCIe r7.0, sec
--
2.56.0.455.g6c5a503b38-goog
next prev parent reply other threads:[~2026-11-06 0:43 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 0:42 [PATCH v2 00/17] PCI: Index saved capability state by configuration space offset David Matlack
2026-11-06 0:42 ` [PATCH v2 01/17] PCI/DPC: Allocate the DPC save buffer during device setup David Matlack
2026-11-06 0:42 ` [PATCH v2 02/17] PCI: Add an offset-indexed store for saved capability registers David Matlack
2026-11-06 0:42 ` [PATCH v2 03/17] PCI: Lay out struct pci_saved_state by configuration space offset David Matlack
2026-11-06 0:42 ` [PATCH v2 04/17] PCI: Save PCIe state in the saved capability store David Matlack
2026-11-06 0:42 ` [PATCH v2 05/17] PCI: Save PCI-X " David Matlack
2026-11-06 0:42 ` [PATCH v2 06/17] PCI/ASPM: Save LTR " David Matlack
2026-11-06 0:42 ` [PATCH v2 07/17] PCI/ASPM: Save L1SS " David Matlack
2026-11-06 0:42 ` David Matlack [this message]
2026-11-06 0:42 ` [PATCH v2 09/17] PCI/PTM: Save PTM " David Matlack
2026-11-06 0:42 ` [PATCH v2 10/17] PCI/TPH: Save TPH " David Matlack
2026-11-06 0:42 ` [PATCH v2 11/17] PCI/DPC: Save DPC " David Matlack
2026-11-06 0:42 ` [PATCH v2 12/17] PCI: Save ACS " David Matlack
2026-11-06 0:42 ` [PATCH v2 13/17] PCI/VC: Split the VC Resource Control restore into a helper David Matlack
2026-11-06 0:42 ` [PATCH v2 14/17] PCI/VC: Save VC state in the saved capability store David Matlack
2026-11-06 0:42 ` [PATCH v2 15/17] PCI: Save reserved capability registers in a single pass David Matlack
2026-11-06 0:42 ` [PATCH v2 16/17] PCI: Remove the per-capability save buffers David Matlack
2026-11-06 0:42 ` [PATCH v2 17/17] PCI: liveupdate: Add helpers to preserve struct pci_saved_state David Matlack
2026-11-06 0:46 ` [PATCH v2 00/17] PCI: Index saved capability state by configuration space offset David Matlack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261106004218.604799-9-dmatlack@google.com \
--to=dmatlack@google.com \
--cc=alex@shazbot.org \
--cc=bhelgaas@google.com \
--cc=corbet@lwn.net \
--cc=graf@amazon.com \
--cc=jgg@nvidia.com \
--cc=jrhilke@google.com \
--cc=kexec@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukas@wunner.de \
--cc=mahesh@linux.ibm.com \
--cc=oohall@gmail.com \
--cc=pasha.tatashin@soleen.com \
--cc=pratyush@kernel.org \
--cc=rdunlap@infradead.org \
--cc=rppt@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=skhawaja@google.com \
--cc=vipinsh@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®